JARFT

Compact solution for uniform coverage. This 2dBi Wi-Fi stick Antenna is specifically designed for the 2.4 GHz frequency band (IEEE 802.11b/g/n). Thanks to its dipole design, it radiates the signal almost spherically in all directions. This makes it the ideal choice for multi-story apartments or houses, as the signal penetrates ceilings and floors better than high-gain directional Antennas. Equipped with a standard RP-SMA connector and a practical hinge, it can be screwed directly onto Wi-Fi r...

The robust universal solution for IoT and M2M. The JARFT CA-24-04 is a compact 2.4 GHz Wi-Fi omnidirectional Antenna with 5 dBi gain, designed specifically for permanent surface mounting. Whether on control cabinets, vending machines, vehicle roofs, or machine housings – thanks to the integrated threaded spigot and IP65 protection class, this Antenna sits securely and weather-tight. It is the ideal choice for telemetry applications, kiosk systems, and industrial Wi-Fi. Available in black or w...

Are you struggling with an extremely weak 4G signal or constantly dropping data rates at your location? The JARFT J4GMB-14-DOMPA is the professional tool to establish a powerful 4G outdoor Antenna directly at your site and realize a stable internet connection. Thanks to enormous signal focusing and a performance gain of true 14 dBi, you can easily bridge long distances to the nearest cell tower and get the most out of your contract.This professional 4G directional Antenna in a large-...

The fastest upgrade for your router: The compact JARFT 4G / 5G stick Antenna delivers up to 5 dBi gain and is simply screwed directly onto your router's Antenna ports. No annoying Cable routing required! It covers all relevant European LTE and the new 5G frequency bands (up to 3800 MHz). Thanks to the practical articulated joint, the Antenna can be perfectly aligned. Ideal for replacing the small standard Antennas of your router with more powerful models. Note: Since modern LTE and 5G connect...

Need help with a manual configuration or professional support from an experienced tech expert? Stuck with your current setup or facing a technical headache that needs a quick fix? No worries! Our team offers reliable remote support for a wide range of leading brands, including Teltonika, Ubiquiti, MikroTik, LigoWave, TP-Link, ALFA Network, and many more.Book your Prepaid Service Unit now and secure 30 minutes of dedicated support. We’ll arrange the appointment flexibly via email, chat, or p...

More range, modern design. This flat omni-directional Wi-Fi Antenna in white is the ideal complement for light-colored routers and access points. With a gain of 4dBi, it offers significantly more range than standard Antennas without restricting vertical radiation too much. The signal is slightly focused, which improves coverage in large rooms, offices, or halls on one floor. Thanks to the standardized RP-SMA connector and the practical hinge, it can be mounted on almost any 2.4 GHz Wi-Fi devi...

With a strong performance gain of 5 dBi in the 5 GHz band and 3 dBi in the 2.4 GHz band, this Antenna delivers a signal upgrade you'll immediately feel. The JARFT CA-2458-02 is an extremely robust, weatherproof WiFi Outdoor Antenna for vehicles, IoT applications, and M2M communication, designed for continuous use in harsh conditions. Thanks to its IP65-certified construction and vandal-resistant screw mounting, it's the perfect choice for public terminals, motorhomes, or industrial Enclosures...

Are you looking for a straightforward solution to massively improve your 4G data reception without spending hours searching for the perfect alignment? The JARFT J4GMB-12-OMOA is the ideal 4G omnidirectional Antenna for everyone who values ease of use and maximum performance. Designed as a powerful 4G outdoor Antenna, it captures signals from a full 360-degree radius, ensuring stable internet on your router, no matter where the nearest transmitter mast is located.This compact multiban...

Do you require a manual configuration or professional support from an experienced technician? Are you stuck with your current configuration or facing a technical issue that demands a quick resolution? No problem! Our team offers reliable remote support for a variety of leading manufacturers, including Teltonika, Ubiquiti, MikroTik, LigoWave, TP-Link, ALFA Network, and many more.Book your Prepaid Service Unit now and secure 60 minutes of dedicated support. We will flexibly schedule the appoint...

Maximum range on a single level. This 2.4 GHz Wi-Fi stick Antenna is a true range booster for large apartments, warehouses, or spacious offices. With a considerable gain of 7dBi, it strongly focuses the signal horizontally. The result is significantly higher range on the same floor. Due to its length of 25 cm and the flat radiation pattern, it is specifically designed for bridging distances and less for coverage across multiple floors. Equipped with an RP-SMA connector, it fits almost all com...

Achieve maximum performance from your WiFi Network with a gain of up to 5dBi in the 5 GHz-Band and 3dBi in the 2.4 GHz-Band. This weatherproof 2x2 MIMO WiFi Antenna for outdoor use is the perfect solution to significantly improve the signal strength and stability of your WiFi Routers, WiFi Access Points, or IoT-Gateways.Thanks to its robust IP65 certification, the Antenna is dust-tight and protected against jet water, making it ideal for vehicle mounting or use on control cabinets. The in...

Maximum range. This 38 cm long high-end Wi-Fi stick Antenna extracts the absolute maximum from your 2.4 GHz Network with 9dBi gain. It is the ultimate solution for very large apartments, long corridors, warehouses, or spacious offices on a single level. Due to the extreme focusing of the signal (only 12 degrees vertical beamwidth), the radiation behaves almost like a laser fan: Enormous width horizontally, but hardly any scattering upwards or downwards. Equipped with an RP-SMA connector and a...

Direct Benefit: This JARFT Antenna is your future-proof solution for stable and fast WiFi. As a WiFi 6E outdoor Antenna with IP65 protection, it supports not only 2.4 and 5 GHz but also the new, interference-free 6 GHz band. This makes you perfectly equipped for the next generation of devices and allows you to benefit from a superior connection today. Ideal as a weatherproof WiFi Antenna with an RP-SMA connector for ceiling mounting or for use on vehicles and vending machines.Thanks to tr...

With a strong 5 dBi gain, you'll get the maximum out of your 2.4 GHz Network. This weatherproof WiFi Antenna for outdoor use is specially designed to increase the range of your WiFi Routers and provide you with a stable signal where you need it most – whether in the garden, at the campsite, or in your motorhome. The standardized RP-SMA connector ensures easy installation.The JARFT DA-24-21 is more than just an Antenna; it's a robust upgrade for your Network. Thanks to its UV-resistant hou...

With a massive performance gain of up to 14dBi, the JARFT J4GMB-14-DOMPA propels your 4G signal to a new level. This JARFT 14dBi 4G Directional Antenna for weak reception is the ultimate solution for locations where other Antennas have long given up. Say goodbye to slow connections and disconnections – here comes pure signal power for your 4G Network.Thanks to the true 2x2 MIMO design and precise linear polarization, you utilize the full potential of your 4G Router. The Antenna covers all...

The specialist for Cisco and Linksys. This 2dBi WiFi stick Antenna is technically identical to our standard Antenna but features the specific RP-TNC connector. This connector type is frequently found on professional networking hardware (e.g., Cisco Aironet) or legendary Linksys WRT routers. With its 2.4 GHz dipole design, it ensures uniform, spherical illumination of the room. It is the perfect replacement for lost or broken original Antennas on devices that do not use the widely common, smal...

Are you struggling with poor cellular reception on your vending machines, control cabinets, or commercial vehicles? The 5G / 4G 2x2 MIMO Puck Mount Antenna is the perfect solution for compact, high-strength signal boosting directly at the point of use. Thanks to its extremely robust housing and low-profile design, this multiband omnidirectional Antenna reliably protects your connection from vandalism and environmental influences.With a frequency spectrum ranging from 700 to 3800 MHz, ...

The upgrade for your Wi-Fi range: Our RF-240 coaxial Antenna Cable connects your router directly to a powerful WiFi outdoor Antenna. It comes pre-assembled with an N-Male connector (for the Antenna) and an RP-SMA Male connector (for the router). Thanks to double shielding and a high-quality solid copper conductor, this "Low Loss" Cable performs significantly better than standard cables. The UV-stable PE jacket allows for permanent outdoor installation. Available in fixed lengths from 1m to 10...

Too short is a thing of the past: With this RF-240 coaxial Antenna Cable, you can easily extend your existing Wi-Fi Cable or Antenna connection. It features an RP-SMA Male connector on one side and an RP-SMA Female connector on the other – fitting almost all standard Wi-Fi routers and Helium miners. Unlike thin standard extensions, this high-quality "Low Loss" Cable is designed for low attenuation, ensuring your signal remains strong even after extension. Thanks to its weatherproof jacket, it...

With an impressive LNA gain of 28 dBi for GPS/GLONASS, this 5-in-1 Antenna for motorhomes, 4G, WiFi, and GPS sets new standards in signal amplification. The JARFT GPM-35-2-GWN is your compact command center for mobile and stationary IoT applications. It combines five high-performance Antennas in a single, extremely robust housing and is the perfect external 4G GPS Antenna for vehicle mounting.This multiband Antenna provides everything you need for a stable connection: 2x2 MIMO for 4G, 2x2...

The pro Cable for Helium miners and Wi-Fi networks. The CNT-400 Antenna Cable is an extremely low-loss high-end coaxial Cable designed specifically for applications where signal strength is critical. Technically, it meets the standards of well-known cable types such as LMR-400 or HDF-400. It comes pre-assembled with an N-Male connector (for professional outdoor Antennas) and an RP-SMA Male connector (for Helium miners and Wi-Fi access points). Thanks to the UV and moisture-resistant jacket, i...

The perfect link for your Antenna setups: This high-quality 50 Ohm Coaxial Adapter (T-piece) acts as a reliable splitter for high-frequency signals. Equipped with the connector combination of 1x RP-SMA Male to 2x RP-SMA Female, this adapter is excellently suited to split the signal from a router port to two Wi-Fi Antennas, for example, or simply to adapt connector formats. The adapter stands out due to its extremely solid build quality, which not only guarantees a long Service life but also e...

Are you suffering from a broken router Antenna or struggling with uneven coverage in your home? This compact dualband WiFi rod Antenna is the perfect replacement to get your local Network back up to speed. Instead of flattening your signal into a narrow disk, this Antenna creates ideal wireless coverage across all surrounding spaces.Featuring a balanced gain of 2 dBi at 2.4 GHz and 3 dBi at 5 GHz, this model builds a nearly spherical coverage bubble. This means your WiFi signal not on...

Our H-155 Antenna Cable is your universal solution for high-frequency connections. Whether as a WiFi Antenna Cable, for your LoRaWAN gateway, or as an 4G extensionc Cable: This low-loss cable reliably transmits signals up to 3 GHz. Use our configurator to order your individual Antenna cable with the right connectors in your desired length.HighlightsVersatile Antenna Cable: Optimized for frequencies up to 3 GHz - ideal as WiFi (2.4 GHz), for LoRaWAN, GSM, UMTS, and LTE Antenna Cable. Weath...

The perfect link for your specialized Antenna setups: This high-quality 50 Ohm Coaxial Adapter (T-piece) acts as a reliable splitter for high-frequency signals. Equipped with the connector combination of 1x RP-SMA Female to 2x RP-SMA Female (three female connectors in total), this adapter is excellently suited to connect Cable runs, split signals, or simply adapt connector formats. The adapter stands out due to its extremely solid build quality, which not only guarantees a long Service life b...

End the Cable clutter: Our LTE & 5G twin Antenna Cable bundles two lines in one string. Since modern mobile connections (MIMO) always require two cables anyway, this CLF-200 twin Cable saves you the hassle of routing two separate wires. It is available in lengths from 2.5m to 10m and comes pre-assembled with N-Male connectors (for the outdoor Antenna) and SMA-Male connectors (for your router). This high-quality cable offers the perfect compromise between low signal loss and high flexibility d...

Are you suffering from a broken router Antenna or struggling with uneven coverage in your home? This compact dualband WiFi rod Antenna is the perfect replacement to get your local Network back up to speed. Instead of flattening your signal into a narrow disk, this Antenna creates ideal wireless coverage across all surrounding spaces.Featuring a balanced gain of 2 dBi at 2.4 GHz and 3 dBi at 5 GHz, this model builds a nearly spherical coverage bubble. This means your WiFi signal not on...

If you want to get the maximum out of your wireless connection, our RF-240 Coaxial Antenna Cable is the right choice. This high-performance coaxial Cable is perfect for applications up to 6 GHz. Whether as a WiFi Antenna Cable for 2.4 GHz and 5 GHz networks, as a high-quality feed line for your 5G or LTE Antenna, or for your IoT or M2M project. Configure your individual coaxial Antenna Cable now in our configurator. We then manufacture it made-to-order just for you!HighlightsHigh-End Ante...

The reliable intersection for your high-frequency signals: This high-quality 50 Ohm Coaxial Adapter (T-piece) is the perfect splitter for your Antenna setups. It is equipped with the classic Standard SMA connector combination: 1x SMA Male to 2x SMA Female. This adapter is ideal, for example, for splitting an LTE or GPS signal into two branches or cleanly routing Cable paths together. In addition to the solid and robust build quality, which guarantees an extremely long Service life, this T-pie...

Is your Antenna Cable too short? Solve the problem without Cable clutter using this Twin extension Cable for LTE and 5G. Many outdoor Antennas come with short, permanently attached cables. This dual cable (two lines in one string) cleanly extends your MIMO connection all the way to the router. Equipped with SMA-Male to SMA-Female connectors, you simply click it between your existing cable and the router. Available in 5m and 10m lengths, it offers an excellent compromise between flexibility an...

No more choppy video calls and loading bars during crucial gaming moments! Imagine your WiFi just working – stable, fast, and reliable. This flat Dual-Band WiFi Antenna is the straightforward upgrade for your WiFi Router that gives you exactly this security in your digital everyday life. Enjoy smooth streaming and a stable home office without constant connection drops.This powerful Omni-Directional Antenna is designed to replace the standard Antennas of your Router or WiFi Access Points a...

No more weak reception. The CNT-400 is our most powerful coaxial Antenna Cable for long distances. With a diameter of approx. 1 cm, it is the "big brother" of standard cables and ensures that your LTE, 5G, or Wi-Fi signal arrives powerfully at the router even after 20 or 30 meters. It corresponds in performance and dimensions to the well-known Cable types H1000, MRC400, or LMR-400. The robust, weatherproof jacket makes it ideal for permanent installation outside on the mast. We build your des...

The smart problem solver for tight spaces: This angled 50 Ohm Coaxial Adapter (90°) is the perfect intermediate piece when things get cramped behind the router or in the server cabinet. It features the clever connector combination of RP-SMA Male to Standard SMA Male. This builds the perfect bridge to connect, for example, Antennas from the Wi-Fi sector (RP-SMA) to cellular or GPS devices (SMA) – and routes it elegantly around the corner without kinking the Cable! The adapter stands out due to...

Constant WiFi dropouts and sluggish downloads? If your WiFi Router signal just doesn't reach every corner, it's incredibly frustrating. The ChangHong DA-2458-04 is the solution: a powerful WiFi Antennas for better range, significantly upgrading your Network and ensuring a stable, fast connection.This Dual-Band Antennas is a true powerhouse. With a gain of 5 dBi in the 2.4 GHz band and a strong 7 dBi in the 5 GHz band, you'll get the maximum out of your WiFi Routers or WiFi Access Points. ...

No more Cable clutter: Our H-155 Twin Antenna Cable combines two coaxial lines in one strand. This makes it the perfect solution for your 4G (LTE) or 5G MIMO Antenna (2x2 MIMO). You only route one Cable run but supply both ports of your router simultaneously. Low loss, flexible, and individually assembled for you with matching N male and SMA male connectors.HighlightsTwin / Dual Design (2-in-1): Two H-155 cables fused together – ideal for 4G & 5G MIMO applications (prevents cable mess). P...

The perfect link between enterprise hardware and standard Antennas: This high-quality 50 Ohm Coaxial Adapter seamlessly bridges the gap between two popular Wi-Fi standards. Equipped with the connector combination of RP-TNC Male to RP-SMA Female, it is the ideal problem solver for connecting standard Wi-Fi Antennas to professional routers (e.g., from Cisco). The RP-TNC connector is characterized by its robust thread, while RP-SMA offers maximum flexibility in Antenna selection. In addition to ...

Are you looking for a particularly discreet and space-saving way to improve reception on your router or PC? The compact WiFi 6E WiFi Rod Antenna delivers maximum flexibility in a minimal footprint. Whether dealing with annoying connection drops in your office or mediocre data throughput while streaming – this flat dualband omnidirectional Antenna ensures noticeably more stable signal quality.With a total length of just 160 mm, the Antenna blends unobtrusively into any setup. Supportin...

The perfect bridge for your outdoor Wi-Fi projects: This high-quality 50 Ohm Coaxial Adapter connects the world of compact home routers with professional outdoor Antenna technology. Equipped with the connector combination of RP-SMA Male to N Female, it is the ultimate problem solver for connecting thick, low-loss Antenna cables (with N connectors) to standard Wi-Fi access points or routers (with RP-SMA sockets). The N connector is the absolute standard for robust outdoor use and is significan...

Are you struggling with mediocre data throughput, stuttering video streams, or connection drops on your router or PC? The WiFi 6E WiFi Rod Antenna is your compact upgrade for significantly more stable wireless coverage throughout your room. Whether dealing with legacy networks or the latest high-speed standards – this dualband omnidirectional Antenna gets the maximum performance out of your WLAN hardware.Thanks to comprehensive frequency coverage from 2.4 GHz through 5 GHz up to the ...

The secure connection for your Antenna cables: This high-quality 50 Ohm Coaxial Adapter is the ideal intermediate piece for demanding Wi-Fi and radio projects. Equipped with the connector combination of RP-SMA Female to N Female (both sides female), this adapter is the perfect problem solver for joining two existing Cable runs together. For example, you can use it to seamlessly connect a long outdoor Cable (with an N Male connector) to a pigtail Cable (with an RP-SMA Male connector). In addit...

Protect your router and access point from electrical death! This coaxial lightning arrestor (surge protector) safely diverts dangerous surges caused by thunderstorms or static buildup on the outdoor Antenna. It covers the entire frequency range from 0 to 6 GHz, making it perfect for WiFi, LTE, 5G, and Helium miners. Thanks to IP67 certification, it is completely waterproof and built for tough outdoor use.HighlightsBroadband 0-6 GHz: One protector for all applications – whether LoRaWAN, LT...

The JARFT J2250-RPSMA 2x2 MIMO WLAN window feed-through is the ideal solution for connecting a 2x2 MIMO WLAN outdoor Antenna to your indoor WLAN router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window Cable can easily be routed through a window frame or simply laid inside it without damaging or affecting the frame, the window, or the locking mechanism.Equipped with two RP-SMA plugs and two RP-SMA sockets, the window feed-through ...

The perfect bridge for your Wi-Fi upgrades: This high-quality 50 Ohm Coaxial Adapter is the ideal problem solver when you want to combine modern networking equipment with proven Antennas. Equipped with the connector combination of RP-SMA Male to RP-TNC Female, it acts as a seamless link. For example, it allows you to connect older but extremely powerful Antennas or Cable runs (with RP-TNC connectors, often found on Cisco or Linksys gear) to brand-new Wi-Fi routers or access points (with RP-SM...

Get the most out of your 5 GHz WiFi Network: This specialized 5dBi Omni-Directional Antenna is consistently optimized for the less congested 5 GHz band, providing you with a noticeably more stable and longer-range signal than most standard Antennas. It's an ideal solution to improve WiFi reception in the 5 GHz Network and eliminate lag during gaming or stuttering during streaming.Thanks to the universal RP-SMA connector, this Antenna fits a huge range of devices like AVM Fritz!Box, TP-Lin...

The JARFT J2250-RPSMA 4x4 MIMO WLAN window feed-through provides an excellent solution for connecting a 4x4 MIMO WLAN outdoor Antenna to your indoor WLAN router or access point without the need for drilling. At 50 cm long and featuring an ultra-thin design, this window Cable can easily be placed through or laid inside a window frame without causing any damage to the frame, window, or locking mechanism.Equipped with four RP-SMA plugs and four RP-SMA sockets, the feed-through ensures a st...

The direct and compact connection without Cable clutter: This high-quality 50 Ohm Coaxial Adapter is the perfect solution for directly connecting two female receptacles from the Wi-Fi and outdoor radio world. Equipped with the connector combination of RP-SMA Male to N Male (both sides with internal threads), it acts as a seamless link. It is ideal, for example, for screwing a standard Wi-Fi router (RP-SMA) directly to an outdoor Enclosure, lightning arrestor, or directional Antenna (N-Type) w...

This weatherproof 2-way coaxial Antenna splitter, featuring a 50-ohm impedance, is perfectly suited for the frequency range of 800 to 2500 MHz. It comes equipped with an N-type connector as the signal input and two N-type connectors as the signal outputs. Its robust construction makes it ideal for outdoor use. With this 2-way coaxial Antenna splitter, you can effectively divide your Antenna signals, thereby achieving improved connectivity and performance for your wireless communication system...

With a strong 7 dBi gain, this 5 GHz WiFi Omni-Directional Antenna propels your Network to a new level. This 7dBi 5GHz WiFi Antenna for Routers is the perfect upgrade solution to specifically improve your Network's signal strength and stability. Specially designed for the less congested 5 GHz band (IEEE 802.11a/n/ac), it minimizes interference and ensures higher data rates – ideal for demanding streaming and gaming.Thanks to the standardized RP-SMA connector and practical swivel joint, in...

The JARFT J2250-SMA 4x4 MIMO 5G/LTE window feed-through is the perfect solution for connecting a 2x2 MIMO 5G or LTE outdoor Antenna to your indoor router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window Cable can be easily routed through or laid inside a window frame without damaging or affecting the frame, window, or locking mechanism.Equipped with two SMA plugs and two SMA sockets, the feed-through ensures a secure and low-loss...

The perfect adaptation for your Antenna cables: This high-quality 50 Ohm Coaxial Adapter solves the problem of incompatible connectors in the Wi-Fi and high-frequency sectors in no time. Equipped with the connector combination of RP-SMA Female to N Male, it acts as a reliable link. It is ideally suited, for example, to connect an existing pigtail Cable (with an RP-SMA Male connector) to a device, Enclosure, or Antenna with a large N Female socket. In addition to the extremely solid build qual...

This high-quality 3-way coaxial Antenna splitter, designed with a 50-ohm impedance, is specifically tailored for the frequency range of 800 to 2500 MHz. With its wide frequency range, it provides reliable and efficient signal distribution for various applications such as mobile communication, Wi-Fi, broadband communication, and more. The splitter features an N-type connector as the signal input, allowing for easy and stable connection to your main Antenna. Additionally, it offers three N-type...

Direct Benefit: Get the most out of your 5 GHz Network! This 9dBi WiFi Antenna significantly boosts your range and signal stability, outperforming standard Antennas by far. If you're looking to buy a powerful 5 GHz Dipole Antenna with a Swivel Joint to optimize the performance of your PC, WiFi Access Points, or WiFi USB Adapters, this model is the perfect choice.The JARFT DA-5158-05 is specifically designed for the 5 GHz frequency band (802.11a/n/ac) and focuses transmit and receive power...

The JARFT J2250-SMA 4x4 MIMO 5G/LTE window feed-through is the perfect solution for connecting a 4x4 MIMO 5G or LTE outdoor Antenna to your indoor router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window Cable can be easily routed through or laid inside a window frame without damaging or affecting the frame, window, or locking mechanism.Equipped with four SMA plugs and four SMA sockets, the feed-through ensures a secure and low-lo...

The solid and direct connection for your cellular setup: This high-quality 50 Ohm Coaxial Adapter is the perfect solution for directly connecting two female receptacles from the LTE and outdoor radio world. Equipped with the connector combination of Standard SMA Male to N Male (both sides with internal threads and pins), it acts as a seamless link. It is excellently suited, for example, to screw a standard LTE/5G router or GPS receiver (SMA) directly to an outdoor Enclosure, lightning arresto...

This high-quality 4-way coaxial Antenna splitter, designed with a 50-ohm impedance, is specifically tailored for the frequency range of 800 to 2500 MHz. With its wide frequency range, it provides reliable and efficient signal distribution for various applications such as mobile communication, Wi-Fi, broadband communication, and more. The splitter features an N-type connector as the signal input, allowing for easy and stable connection to your main Antenna. Additionally, it offers four N-type ...

Say goodbye to WiFi dead zones on your patio or in the garden! Imagine streaming your favorite series smoothly outdoors or working without interruptions from your home office by the pool. This weatherproof 5 GHz WiFi Outdoor Antenna with RP-SMA connector makes exactly that possible by distributing your signal precisely and stably where you need it.This 5dBi Omni-Directional Antenna is a specialist for the 5 GHz frequency band (5100-5800 MHz) and optimizes your connection according to IEEE...

This ultra-thin window Cable/window feedthrough is 40 cm long and equipped with an RP-SMA male plug and an RP-SMA female socket. This makes the Cable ideal for routing the Antenna Cable of a WiFi Antenna through a window. Simply place the flat cable in the frame with the window open and then carefully close the window.

The robust bridge for your industrial and measurement hardware: This high-quality 50 Ohm Coaxial Adapter is the ideal problem solver when professional radio technology meets massive outdoor Antennas. Equipped with the connector combination of TNC Male to N Female, it seamlessly connects devices featuring the threaded TNC standard (often found on industrial routers, RFID hardware, or measurement equipment) to thick, low-loss N-Type Antenna cables. Unlike BNC connectors, the thread of the TNC c...

This ultra-thin window Cable/window feedthrough is 40 cm long and equipped with an SMA plug and an SMA socket. This makes the Cable ideal for routing the Antenna Cable of a 3G, 4G, or 5G Antenna through a window. Simply place the flat cable in the frame with the window open and then carefully close the window.

Direct Benefit: Create a rock-solid, weatherproof connection between your professional equipment and high-performance Antennas. This weatherproof RP-TNC to N-female Coaxial Adapter is the perfect bridge where other adapters fail due to vibrations or moisture. Reliably connect what belongs together – from older Cisco WiFi Access Points to modern outdoor Antennas with an N-connector.With a precise 50 Ohm impedance, gold-plated contacts for minimal signal loss, and a robust, nickel-plated br...

The Antenna Cable of the type CNT400 is an extremely low attenuation and high quality coaxial Antenna Cable. It is supplied with the connector combination N female connector to RP-SMA male connector in the chosen length (3m, 5m, 10m). The Cable is UV and moisture resistant and can be used outdoors. Due to the large diameter and the solid inner conductor, the cable can be described as rigid. Due to the very low attenuation, the cable is very suitable for LoRa, WiFi, GSM, 3G, 4G and 5G frequenc...

This weatherproof 2-way coaxial Antenna splitter, featuring a 50-ohm impedance, is perfectly suited for the frequency range of 5000 to 6000 MHz. It comes equipped with an N-type connector as the signal input and two N-type connectors as the signal outputs. Its robust construction makes it ideal for outdoor use. With this 2-way coaxial Antenna splitter, you can effectively divide your Antenna signals, thereby achieving improved connectivity and performance for your wireless communication syste...

You've invested in an expensive 5G Antennas or WiFi Antennas, but the signal at your Router is weak? Often, a subpar connection is the bottleneck that slows down your entire performance. No more compromises! This professional low-loss N-Adapter 50 Ohm for 5G Antennas ensures that every decibel of your signal arrives exactly where it belongs – without attenuation or interference.Crafted from solid, nickel-plated brass with gold-plated inner conductors and a high-quality PTFE dielectric, th...

This high-quality 3-way coaxial Antenna splitter, designed with a 50-ohm impedance, is specifically tailored for the frequency range of 5000 to 6000 MHz. With its wide frequency range, it provides reliable and efficient signal distribution for various applications. The splitter features an N-type connector as the signal input, allowing for easy and stable connection to your main Antenna. Additionally, it offers three N-type connectors as signal outputs, enabling the distribution of the signal...

Specified for frequencies up to 11 GHz, this N-Male to N-Male Adapter is the professional solution for connecting two coaxial cables with N-Female connectors with low loss and rock-solid mechanical stability. The JARFT N-13-09-TGN is the ideal 50 Ohm N-Type Coaxial Connector if you need an absolutely reliable coupling for your Antenna system, test setups, or radio application.Thanks to its precise manufacturing, robust nickel-plated brass housing, and high-quality PTFE dielectric, excelle...

This high-quality 4-way Coaxial Splitter SP-58-03 is specifically designed for the demanding frequency range of 5000 to 6000 MHz. It enables reliable and efficient signal distribution for your wireless communication systems. With one N-female input and four N-female outputs, you can easily connect multiple devices to a single Antenna. Its weatherproof construction also guarantees high resistance to environmental influences, making it ideal for outdoor use.HighlightsWide Frequency Range: Op...

Imagine your Antenna cables are just one meter too short to reach the perfect reception spot for your 5G Antennas or WiFi Access Points. No more compromises! With this high-quality N-Female to N-Female Coaxial Adapters, you can effortlessly bridge that gap and create an absolutely reliable, weatherproof connection. Extend your Coaxial cables without signal loss and finally enjoy the stable connection you deserve.This professional Coaxial Adapters is a masterpiece of precision. With an exa...

Do you know the feeling? That thick, rigid Antenna Cable is almost impossible to bend and puts massive pressure on the jack of your Router or Antenna. Every millimeter of extra bend feels like something's about to break. This ingenious 90° angle adapter is the salvation for your installation. It takes all the mechanical stress off the Cable and device, enabling a clean, secure connection where there was only chaos before.This 90-degree N-angle adapter is weatherproof and designed for the ...

This high-quality Coaxial Pigtail reliably connects devices with a U.FL connector to external Antennas or components with an SMA female connector. With a length of 20 cm, it offers optimal flexibility for installations in confined spaces without unnecessary signal loss. It is ideal for WLAN, LTE, GPS, and IoT applications where a robust and stable RF connection is crucial. The precise manufacturing ensures long-lasting performance and minimizes the risk of connection interruptions.Highligh...

With an excellent VSWR of ≤ 1.25 up to 6 GHz, this N-Male to N-Male 90-degree angle adapter is the professional solution for space-critical RF installations. It's the perfect problem-solver for installations behind 19-Inch Racks or in tight Enclosures, preventing your Antenna cables from sharp kinking. This way, you protect not only your Cabling but also the device's jack from mechanical stress.The precise 50-ohm impedance matching, high-quality PTFE dielectric, and gold-plated inner cond...

The bridge from board to Antenna. This high-quality Coaxial Pigtail connects internal radio modules (with U.FL / IPEX connector) to external Wi-Fi Antennas (RP-SMA). With a length of 25 cm, it offers enough flexibility for clean routing inside PC cases, routers, or industrial boxes. The Cable is made of robust RG-178, providing better shielding and durability than standard wires. The RP-SMA jack is designed as a "bulkhead": Thanks to the included nut and washer, you can screw it firmly into a...

Direct Benefit: Connect two WiFi Antenna cables with low loss and securely. This RP-SMA Adapter is the perfect solution to extend your existing cables with RP-SMA connectors in an instant. Thanks to its precise 50-ohm impedance and high-quality materials, it ensures stable signal transmission without compromise, ideal for your WiFi setup at home or in the office.This Coaxial Adapter RP-SMA Male to Male consists of a robust, nickel-plated brass housing with gold-plated inner conductors, wh...

You have the perfect Antenna, but the connector just doesn't fit your Router or radio module? That frustration ends now. With this professional RP-SMA to SMA Adapter for WiFi Antennas, you'll bridge compatibility issues immediately and without signal loss. Effortlessly connect devices that previously couldn't communicate, ensuring a stable, high-performance connection.This Coaxial Adapter is more than just a simple connector. It's precisely engineered for 50 Ohm impedance to minimize sign...

High-quality assembled Coaxial Pigtail with the connector combination U.FL plug to N male plug. The low loss pigtail has a length of 25cm and is made on RG-178 Cable.

Imagine you're setting up your perfect WiFi Network or FPV drone and realize: the Antenna Cable is a few centimeters too short. Pure frustration! This little helper comes into play right here. It effortlessly connects two Cable ends, ensuring your signal arrives exactly where you need it – without compromise and without having to buy a completely new, long Cable. With this Coaxial Adapter for your RP-SMA cable extension, you can create the perfect connection in no time and get back to focusin...

High quality Coaxial Pigtail with the connector combination U.FL plug to N female socket. The pigtail has a length of 25cm and is made with RG-178 Cable. The socket is supplied with a lock nut and washer and can therefore be used as a bulkhead socket.

Direct Benefit: This Coaxial Adapter ensures an absolutely loss-free and stable connection for your RP-SMA components. Perfectly suited to extend your WiFi Antenna cables or to function as a high-quality RP-SMA Coaxial Connector, it surpasses standard adapters with its excellent signal integrity up to 18 GHz. No more shaky connections and signal losses – here you get a clean solution.With a precise 50-Ohm impedance, an extremely low VSWR of less than 1.15:1, and a minimal insertion loss o...

With an extremely low attenuation of only approx. 0.5 dB, this RP-SMA 90-degree angle adapter ensures almost loss-free signal transmission. This Coaxial Adapter is the perfect solution for tight spaces and effectively prevents kinking of Antenna cables on your WiFi Router or PCI card. It was specifically designed as an RP-SMA male to female angled connector to ensure an optimal and stable connection in your high-frequency setup.The adapter operates with a standard impedance of 50 Ohms and...

No more kinked Antenna cables and unsightly installations behind your cabinet! Imagine finally being able to perfectly align your new, powerful WiFi Antennas without the Cable getting in the way or the connection suffering. This 90° angle adapter is the ingenious and elegant solution for all installations where every centimeter counts and clean Cabling is crucial.Many of our customers buy this professional RP-SMA Male to SMA Female angle adapter to connect the typical RP-SMA ports of WiFi...

With impressive signal integrity and an extremely low insertion loss, typically under 0.3 dB, this Coaxial Adapter ensures a lossless connection. The SMA Male to RP-SMA Female Adapter is the perfect solution to resolve compatibility issues between your devices and Antennas, especially if you want to connect a WiFi Antenna with RP-SMA to a Fritzbox or another WiFi Router with an SMA connector.This high-quality 50 Ohm Coaxial Adapter is designed for frequencies up to 18 GHz and guarantees f...

Your upgrade for stable 5G & LTE: This 2x2 MIMO magnetic base is the ultimate problem solver for virtually any common cellular router or stationary modem. Let’s be honest: if your Antennas are stuck in the back of a Network cabinet, under a desk, or in the darkest corner, your data rate will tank. With this stand, you can easily bring your two Antennas out of hiding and place them—thanks to the 1.5-meter Cable—exactly where the reception actually rocks, like right by the window. The powerful ...

Do you know the feeling? You have the perfect Antenna for your project, but the connector just doesn't fit your new WiFi Router or SDR module. End the frustration! This small but extremely powerful Coaxial Adapter is the bridge you need. It effortlessly connects components with RP-SMA and SMA Coaxial Connectors, ensuring your setup works without compromises or signal loss. Simply screw it on and immediately enjoy a stable connection.This professional RP-SMA Male to SMA Female Coaxial Adap...

With its universal RP-SMA connector and 1.5-meter Cable, this magnetic base is the perfect solution for flexible positioning of your WiFi Antennas. It was developed to move your Antennas out of the radio shadow of your PC or cabinet and place them in an optimal location. The result: a noticeably more stable signal and better reception, whether for WiFi, Bluetooth, or your Helium.The stand is designed as 1x1 SISO (Single Input, Single Output) and features an integrated, flexible Coaxial Pi...

Constant connection drops while gaming? Stuttering streams, even though you pay for fast internet? The problem is often not your tariff, but the location of your Antennas – caught in the radio shadow behind your PC case. This WiFi Antenna Extension with Stand is the simple and ingenious solution. Position your WiFi Antennas freely in the room for a maximally strong and stable signal.This stand was specially developed for modern 2x2 MIMO systems and offers two separate lines for maximum da...

Annoyed by constant WiFi dropouts and lag spikes in the middle of your game? Is your PC in a dead zone under your desk, blocking the signal? This external Antenna stand for Gaming PCs and WiFi Routers is the solution. Position your three WiFi Antennas with the 1.5-meter Antenna extension exactly where reception is best, and get back the stable, fast Network connection you deserve.This Antenna base is specifically designed for modern 3x3 MIMO systems and uses the universal RP-SMA connector...

Constant lags, connection drops, and a WiFi signal that barely leaves the room? Your high-end setup deserves more! Often, it's not the WiFi Router's fault, but the unfavorable position of your WiFi Antennas, tucked behind your PC or in a cabinet. This 4x4 MIMO Magnetic Base for WiFi Antennas is your simple and ingenious solution to elevate your Network to the next level and ensure stable reception. The perfect WiFi Antenna base for your Gaming PC and demanding setups!With four bundled, 1....

Coaxial Pigtail with connector FME male to CRC-9 male. The Cable used is an RG-178 Cable with a length of 25cm. Further information about CRC-9 connector can be found below in the description.

Coaxial Pigtail with connector combination FME male to MC-CARD male. The Cable used is an RG-178 Cable with a length of 25cm. Further information about MC-CARD connector can be found below in the description.

Coaxial Pigtail with connector combination FME male to SSMB male. The Cable used is an RG-178 Cable with a length of 25cm. Further information about SSMB connector can be found below in the description.

Flexible Coaxial Pigtail / Adapter: SMA Female to TS-9 Male:This flexible Coaxial Pigtail features an SMA female connector and a TS-9 male connector, utilizing a 25 cm long RG-178 Cable. It is commonly used to connect an LTE or 5G Antenna to a mobile LTE / 5G Router. Many of these compact mobile routers use the TS-9 connector format for external Antenna connections, while standard LTE or 5G Antennas are typically equipped with SMA connectors.Advantages of the Pigtail:The pigtail offers a fl...

Flexible Coaxial Pigtail / Adapter: SMA Female to CRC-9 Male: This flexible Coaxial Pigtail features an SMA female connector and a CRC-9 male connector, utilizing a 25 cm long RG-178 Cable. It is commonly used to connect an LTE or 5G Antenna to a mobile LTE / 5G Router. Some of these compact mobile routers use the CRC9 connector format for external Antenna connections, while standard LTE or 5G Antennas are typically equipped with SMA connectors. Advantages of the Pigtail: The pigtail offers a...

Coaxial Pigtail with connector combination SMA female to MC-CARD male. The Cable used is an RG-178 Cable with a length of 25cm.

Flexible Coaxial Pigtail / Adapter: SMA Female to SMA Male: This flexible Coaxial Pigtail features an SMA female connector and an SMA male connector, utilizing a 25 cm long RG-178 Cable. It is commonly used to connect an LTE or 5G Antenna to an LTE / 5G Router. Rigid and immovable Antenna cables can create a high leverage effect on the Antenna connection of your LTE or 5G router. To reduce this strain, you can use this pigtail. Advantages of the Pigtail: Rigid and immovable antenna cables can...

The Coaxial Pigtail is equipped with a FAKRA Z and an SMA socket. The pigtail is made on RG-178 Cable and has a length of 25cm.

This Coaxial Adapter FME Male to SMA Male is the perfect, low-loss bridge between your vehicle Antenna and your 4G router or GPS receiver. It solves the common problem that Antennas with FME connectors do not fit directly onto modern devices with SMA jacks, ensuring stable, clean signal transmission.Thanks to its precise 50-Ohm impedance, gold-plated contacts, and a high-quality PTFE dielectric, signal attenuation is reduced to an absolute minimum (< 0.2 dB). The robust, nickel-plated bra...

This compact 433 MHz omnidirectional Antenna / rod Antenna with 2dBi gain is suitable for short distances. The signal is radiated evenly in all directions thanks to the almost spherical radiation characteristics. The Antenna is designed for indoor use. The omnidirectional radiator has a SMA connector with an articulated joint. The antenna is white, weighs just 10g and has the following dimensions: 10.8cm x 1cm

Weatherproof, IP67 rated CAT5e RJ-45 Ethernet plastic Cable feed / gland with integrated O ring, RJ-45 socket and 25cm Cable with RJ45 plug. The Cable gland is particularly suitable for use on weatherproof Enclosures in outdoor areas.

This weatherproof (IP67 classified) RJ-45 ethernet Cable feedthrough made of plastic with an integrated sealing ring is suited for use with outdoor Enclosures / boxes. It has RJ-45 socket and a LSA terminal block.

The lifesaver for your Wi-Fi gear: This gold-plated 50 Ohm RP-SMA Terminator is specially designed for Wi-Fi routers, access points, and Helium miners. It professionally seals open Antenna ports. An open port acts like a mirror ("standing waves"), leading to interference and potentially damaging your transmitter. Since almost all Wi-Fi devices use the "Reverse Polarity" (RP-SMA) standard, this connector features a hole in the center instead of a pin. High-quality gold plating for best signal ...

The premium solution against signal reflections: This gold-plated 50 Ohm SMA Terminator (Dummy Load) perfectly seals open ports on your router, LTE modem, or measuring instrument. An open SMA port acts like a mirror for radio waves ("standing waves"), causing interference and, in the worst case, damaging your transmission equipment (e.g., on FPV drones). This high-quality, gold-plated terminator ensures the best electrical contact and cleanly absorbs the energy. Suitable for everything from 0...