Skip to consent manager Skip to main content Skip to search Skip to category navigation Skip to footer
JARFT

4G / 5G Twin Antenna Cable | N male to SMA male (2.5m, 5m, 7.5m, 10m)

End the cable clutter: Our LTE & 5G twin antenna cable bundles two lines in one string. Since modern mobile connections (MIMO) always require two cables anyway, this CLF-200 twin cable saves you the hassle of routing two separate wires. It is available in lengths from 2.5m to 10m and comes pre-assembled with N-Male connectors (for the outdoor antenna) and SMA-Male connectors (for your router). This high-quality cable offers the perfect compromise between low signal loss and high flexibility during installation.


Highlights

  • 2-in-1 Design (Twin): Two cable strands firmly connected – perfect for 2x2 MIMO antennas.
  • Perfect Fit: N-Male to SMA-Male (The standard for 99% of all LTE/5G routers & antennas).
  • Selectable Lengths: Available in 2.5m, 5m, 7.5m, and 10m – suitable for any setup.
  • Good Compromise: CLF-200 cable has low attenuation but is still easy to bend with an individual diameter of approx. 5mm.
  • 4x4 MIMO Ready: If you have a 4x4 MIMO router (4 ports), simply order two of these twin cables.

Do you have questions about the Twin Antenna Cables? Then just ask us!


Cable length
from 19,99 €
incl. 19% VAT , plus shipping costs
Available immediately

This item has variations. Please select the requested variation.

Why a Twin Cable for LTE & 5G?

Mobile networks (4G/LTE and 5G) operate almost exclusively using MIMO technology (Multiple Input Multiple Output). This means your router transmits and receives on two antennas simultaneously to double the speed and stabilize the connection. That's why most routers and outdoor antennas have two ports.
Instead of struggling to run two individual cables through the wall, you can use our CLF-200 Twin Cable. It can be routed like a single cable and splits cleanly at the ends.

Which Length is Right for You?

We offer the cable in four practical lengths. Simply choose the shortest possible variant for your setup to keep the signal loss (attenuation) as low as possible:

  • 2.5 Meters: Perfect for short distances, e.g., from the router directly to the windowsill.
  • 5.0 Meters: The standard length to place the antenna on the balcony or in front of the window.
  • 7.5 Meters: Ideal for getting from the router through the wall to the nearest canopy.
  • 10.0 Meters: Maximum range to connect the router inside the house with the antenna on the roof.

The Right Connector for Your Router

The connector combination on this cable is the absolute standard for mobile broadband:

  • 2x N-Male: The large, robust connectors go outside to your LTE/5G outdoor antenna.
  • 2x SMA-Male: The small screw connectors (with the pin in the center) go to your router (e.g., Teltonika, FritzBox, Huawei, Netgear).

Not sure if your router has SMA? Just take a look at our product images. We've included a comparison picture of an SMA connection on a router. (Note: Do not confuse it with RP-SMA for standard Wi-Fi!).



Technical Data

Cable Type:CLF-200 TWIN (Dual Coaxial Cable)
Available Lengths:2.5m / 5m / 7.5m / 10m
Impedance:50 Ohm
Antenna Connector:2x N-Male
Router Connector:2x SMA-Male (with pin)
Inner Conductor:1.12 mm Copper Wire (per core)
Insulation:2.95 mm PE
Outer Jacket:PVC (Black)
Outer Diameter:approx. 4.95 mm (per core) / approx. 10 mm (total width)
Attenuation (Reference per Meter): 0.30 dB/m @ 800 MHz
0.46 dB/m @ 1800 MHz
0.56 dB/m @ 2600 MHz


Scope of Delivery

1x LTE / 5G Twin Antenna Cable (CLF-200) in selected length with 2x N-Male to 2x SMA-Male

Manufacturer information: Name: JARFT
Homepage: https://www.jarft.eu/
Responsible person: Name: DAJB Hamburg GmbH
Street name: Von-Bargen-Straße 34
Postal code, City: 22041 , Hamburg
Country: Deutschland
E-Mail: hallo@dajb-hamburg.de

Write the first review for this item and help others make a purchase decision!:

Loading ...