JARFT

Coaxial Adapter | SMA male to RP-SMA male, angled, 50 Ohms

The smart problem solver for tight spaces: This angled 50 Ohm coaxial adapter (90°) is the perfect intermediate piece when things get cramped behind the router or in the server cabinet. It features the clever connector combination of RP-SMA Male to Standard SMA Male. This builds the perfect bridge to connect, for example, Antennas from the Wi-Fi sector (RP-SMA) to cellular or GPS devices (SMA) – and routes it elegantly around the corner without kinking the cable! The adapter stands out due to its extremely solid build quality, which guarantees a long Service life. Thanks to gold-plated contacts and precise manufacturing, the attenuation value is at an excellently low 0.5 dB.


Highlights

  • Space-Saving 90° Design: The angled adapter guides the antenna cable closely along the casing, preventing dangerous cable breaks caused by kinking.
  • Bridge of Standards: Effortlessly connects the RP-SMA standard (often Wi-Fi) with the Standard SMA format (often LTE, 5G, or GPS).
  • Precise Connectors: 1x RP-SMA Male (inside thread without pin) to 1x Standard SMA Male (inside thread with pin).
  • Minimal Signal Loss: Highest signal quality and interference-free transmission thanks to an extremely low attenuation of only approx. 0.5 dB.
  • Standard 50 Ohm Impedance: Perfectly matched for all common high-frequency and radio technology applications.

Do you have questions about the angled RP-SMA to SMA adapter?
Then feel free to contact us, we'll be happy to help!

5,99 €
incl. 19% VAT , plus shipping costs
Must be ordered. Ready for shipment in 14 days after order.
Delivery time: ca. 3 weeks (DE - int. shipments may differ)
Request Quote for Institutions & Corporates!
Sold out
Coaxial adapter RP-SMA male to RP-SMA female with 90°...
Coaxial Adapter | SMA male to RP-SMA male, angled, 50 Ohms
5,99 € *

No More Kinked Cables

Every installer knows the struggle: The router is placed close to the wall or in a tight Network cabinet, and the thick, rigid Antenna Cables stick out far to the back. If the cable is bent sharply here, the sensitive shielding inside breaks and the signal is ruined. This 90° angled coaxial adapter safely and losslessly routes the signal around the corner, allowing you to guide your cables neatly and close to the casing downwards or sideways.

Two Worlds, One Adapter

This adapter is not only angled, but it also acts as a bridge for different standards. On one side, it offers an RP-SMA Male connector (familiar from Wi-Fi routers: inside thread, but a hole in the middle). On the other side, it has a Standard SMA Male connector (typical for LTE/4G routers: inside thread with a pointed center pin). This makes incompatible connections fit in no time!

Quality for the Best Possible Reception

Every additional intermediate piece in the antenna cable costs valuable signal strength. With cheap adapters, the benefit of a good antenna vanishes instantly. This adapter is trimmed for absolutely lossless transmissions. It offers the standardized impedance of 50 Ohm and shines with an attenuation value of only approx. 0.5 dB.



Technical Data

Product:Coaxial Adapter (Angled)
Impedance:50 Ohm
Attenuation:approx. 0.5 dB
Connector 1: 1x RP-SMA Male (without pin)
Connector 2: 1x Standard SMA Male (with pin)
Form Factor: 90° Angled (Right-Angle)


Scope of Delivery

1 x Coaxial Adapter - RP-SMA Male to SMA Male (90° angled)

Manufacturer information: Name: JARFT
Homepage: https://www.jarft.eu/
Responsible person: Name: DAJB Hamburg GmbH
Street name: Von-Bargen-Straße 34
Postal code, City: 22041 , Hamburg
Country: Deutschland
E-Mail: hallo@dajb-hamburg.de

Write the first review for this item and help others make a purchase decision!:

Others also bought:

TP-Link RE650 | Mesh WiFi Repeater, AC2600 Dual-Band, MU-MIMO, Gigabit Port
87,49 € *
Grandstream GWN7630 | Wi-Fi AP, 802.11ac Wave-2, 4x4 MU-MIMO, PoE+
124,99 € *
Go to item