Compact Design for Maximum Versatility
Where conventional rod Antennas break off or get in the way, this 5G / 4G Puck Mount Antenna shows its full strength. It was specifically developed for surface mounting on flat surfaces such as ceilings, machine Enclosures, control cabinets, vending machines, or vehicle roofs. With a height of just 4.5 cm, the Antenna blends discreetly into any environment and offers vandals no target area.
Reliable Protection for Indoor and Outdoor Use
Whether dust, continuous rain, or extreme temperatures – this cellular Antenna defies the harshest conditions. The housing made of impact-resistant plastic complies with protection class IP65, reliably protecting the internal electronics from water jets and dust. On the underside, a surrounding rubber seal ensures that no water penetrates through the mounting hole into the interior of your cabinet or vehicle when tightening the counter nut.
Future-Proof Multiband Reception with 2x2 MIMO
Say goodbye to drops in data transmission. By utilizing 2x2 MIMO, your router uses two separate reception channels simultaneously. The antenna provides up to 4 dBi gain in the essential high bands. Covering frequencies from 700 MHz up to 3800 MHz, you are not only equipped for current 4G networks but also utilize ultra-fast 5G frequencies (like the n78 band) without replacing hardware.
Thoughtful Mounting Concept with Gasket
Installation requires only a standard drill hole. The 2.5 cm long thread on the underside is inserted through the opening and screwed tight from the inside with the included counter nut. The two 30 cm short RG174 Antenna Cables prevent unnecessary cable clutter inside the housing. Via the pre-assembled SMA connectors, you connect the antenna directly to your 4G or 5G router, gateway, or M2M terminal.
Strengths & Notes at a Glance
- Pro: Extremely compact puck design effectively protects against mechanical damage and vandalism.
- Pro: IP65 protection class with rubber gasket protects housing and electronics from water and dust.
- Pro: Broad spectrum (700-3800 MHz) covers all 4G and sub-6 GHz 5G networks.
- Pro: True 2x2 MIMO for doubled data streams and enhanced signal stability.
- Pro: High temperature range of -40°C to +80°C for demanding industrial environments.
- Note: Cables are relatively short at 30 cm – ideal for cabinets, consider extension cables if needed.
- Note: Requires a drill hole for secure threaded mounting with a counter nut.
Specifications & Properties
| Manufacturer / Model: | JARFT / GPM45G-02 |
| Antenna Type: | Multiband 5G / 4G Antenna / Omnidirectional |
| MIMO Configuration: | 2x2 MIMO (two integrated antenna systems) |
| Frequency Range 1: | 700 - 960 MHz (4G 700/800/900, GSM) |
| Frequency Range 2: | 1700 - 2700 MHz (4G 1800/2100/2600, 3G) |
| Frequency Range 3: | 3300 - 3800 MHz (5G Sub-6 GHz / Band n77/n78) |
| Gain (700-960 MHz): | 1 dBi |
| Gain (1700-2700 MHz): | 4 dBi |
| Gain (3300-3800 MHz): | 4 dBi |
| Radiation Pattern: | 360° Horizontal / 360° Vertical (Omnidirectional) |
| Polarization: | Vertical (Linear) |
| Impedance: | 50 Ohm |
| VSWR: | max. 2.0 |
| Protection Rating: | IP65 (dust-tight & jetwater protected) |
| Cable Type: | 2 x RG-174 Coaxial Cable |
| Cable Length: | 30 cm |
| Connector Type: | 2 x SMA Plug (Male) |
| Mounting Type: | Surface mounting via 2.5 cm threaded shaft & counter nut |
| Gasket: | Integrated rubber lip at base of housing |
| Material: | Robust plastic housing (Black or White) |
| Dimensions: | 4.5 cm x 8.0 cm x 4.5 cm |
| Operating Temperature: | -40°C to +80°C |
| Application Area: | Indoor and Outdoor |
Scope of Delivery
| 1 x Multiband 4G / 5G Puck Mount Antenna (2x2 MIMO, 4 dBi, IP65) |
| 2 x Integrated 30 cm RG174 cables with SMA connectors |
Frequently Asked Questions (FAQ)
What is this puck antenna best suited for?
It is ideal for surface and ceiling mounting on machine Enclosures, control cabinets, vending machines, worktables, or vehicles.
Do I need a hole for installation?
Yes, mounting is done via a 2.5 cm long thread on the underside, which is inserted through a hole and secured with a counter nut.
Is the antenna suitable for outdoor use?
Yes, thanks to the IP65 certified housing and an integrated rubber seal, it is weatherproof and protected against moisture.
Does the antenna support 5G connections?
Yes, it covers frequencies from 700 to 3800 MHz, supporting key sub-6 GHz 5G bands as well as standard 4G.
What connectors do the integrated cables have?
The two 30 cm long RG174 cables are each equipped with a standard SMA male connector.
Does this puck antenna need to be manually aligned?
No, thanks to its 360° omnidirectional characteristic, it receives signals evenly from all directions.
Homepage: https://www.jarft.eu/
Street name: Von-Bargen-Straße 34
Postal code, City: 22041 , Hamburg
Country: Deutschland
E-Mail: hallo@dajb-hamburg.de
