JARFT

Protect your router and access point from electrical death! This coaxial lightning arrestor (surge protector) safely diverts dangerous surges caused by thunderstorms or static buildup on the outdoor antenna. It covers the entire frequency range from 0 to 6 GHz, making it perfect for WiFi, LTE, 5G, and Helium miners. Thanks to IP67 certification, it is completely waterproof and built for tough outdoor use.HighlightsBroadband 0-6 GHz: One protector for all applications – whether LoRaWAN, LT...

Compact WiFi omnidirectional antenna / rod antenna with a 3dBi gain in the 2.4GHz frequency band and 4dBi in the 5-7.1 GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands as well as the new extended WiFi 6E standard with a frequency range up to 7100 MHz (IEEE 802.11b/g/n/ac/ax). The signal is radiated with 360° horizontal and 50° vertical coverage.The WiFi omnidirectional antenna is designed for indoor use, features ...

Compact WiFi omnidirectional antenna / rod antenna with a 3dBi gain in the 2.4GHz frequency band and 5dBi in the 5-7.1 GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands as well as the new extended WiFi 6E standard with a frequency range up to 7100 MHz (IEEE 802.11b/g/n/ac/ax). The signal is radiated with 360° horizontal and 50° vertical coverage.The WiFi omnidirectional antenna is designed for indoor use, features ...

Compact WiFi omnidirectional antenna / rod antenna with flat design a 3dBi gain in the 2.4GHz frequency band and 4dBi in the 5GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands (IEEE 802.11b/g/n/ac/ax). The signal is radiated with a 360° horizontal and 50° vertical spread.The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a...

Compact WiFi omnidirectional antenna / rod antenna with a 2dBi gain in the 2.4GHz frequency band and 3dBi in the 5GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands (IEEE 802.11b/g/n/ac/ax).Omnidirectional WiFi Antennas in general are charcteristically constructed to cover large areas and to provide the WiFi Signal all-over into all directions. This WiFi Antenna has a horizontal beamwidth of 360° and a vertical beam...

Small, flexible, and universal: This compact Wi-Fi rod antenna is the perfect replacement for broken or lost router antennas. It supports all common standards (incl. Wi-Fi 6 / ax) on 2.4 GHz and 5 GHz. With a gain of 2 dBi / 3 dBi, it ensures nearly spherical coverage. This means the signal spreads not just horizontally, but also upwards and downwards – ideal for supplying the floor above, for example. Thanks to the RP-SMA connector and knuckle joint, it fits almost any standard Wi-Fi router....

Compact solution for uniform coverage. This 2dBi Wi-Fi stick antenna is specifically designed for the 2.4 GHz frequency band (IEEE 802.11b/g/n). Thanks to its dipole design, it radiates the signal almost spherically in all directions. This makes it the ideal choice for multi-story apartments or houses, as the signal penetrates ceilings and floors better than high-gain directional antennas. Equipped with a standard RP-SMA connector and a practical hinge, it can be screwed directly onto Wi-Fi r...

Maximum range on a single level. This 2.4 GHz Wi-Fi stick antenna is a true range booster for large apartments, warehouses, or spacious offices. With a considerable gain of 7dBi, it strongly focuses the signal horizontally. The result is significantly higher range on the same floor. Due to its length of 25 cm and the flat radiation pattern, it is specifically designed for bridging distances and less for coverage across multiple floors. Equipped with an RP-SMA connector, it fits almost all com...

More range, modern design. This flat omni-directional Wi-Fi antenna in white is the ideal complement for light-colored routers and access points. With a gain of 4dBi, it offers significantly more range than standard antennas without restricting vertical radiation too much. The signal is slightly focused, which improves coverage in large rooms, offices, or halls on one floor. Thanks to the standardized RP-SMA connector and the practical hinge, it can be mounted on almost any 2.4 GHz Wi-Fi devi...

The specialist for Cisco and Linksys. This 2dBi WiFi stick antenna is technically identical to our standard antenna but features the specific RP-TNC connector. This connector type is frequently found on professional networking hardware (e.g., Cisco Aironet) or legendary Linksys WRT routers. With its 2.4 GHz dipole design, it ensures uniform, spherical illumination of the room. It is the perfect replacement for lost or broken original antennas on devices that do not use the widely common, smal...

Weatherproof 2.4GHz WiFi omnidirectional antenna / rod antenna with 5 dBi gain and RP-SMA connector. The antenna is suitable for standard 2.4GHz WiFi networks (IEEE 802.11b/g/n). The RP-SMA antenna connection is sealed with a rubber O-ring. The antenna housing material is UV-resistant.The 5 dBi gain of this WiFi omnidirectional antenna results in a vertical beamwidth of 40°, focusing the signal. Therefore, the antenna is well-suited for illuminating small outdoor areas.The WiFi omnidirect...

The flexible standard for better Wi-Fi. This 2x2 MIMO magnetic base is the universal solution for almost all common Wi-Fi devices. Whether it's a gaming PC, home office computer, or LTE router (with RP-SMA adapter): If the antennas are hidden directly behind the device under the desk or in a cupboard, the connection suffers. With this stand, you can relocate your two antennas by 1.5 meters to a free spot with better reception. The strong magnetic base adheres securely to the PC case, filing c...

Signal tuning for 3-antenna systems. This 3x3 MIMO magnetic base gets your Wi-Fi antennas out of the signal shadow. It is specifically designed for routers, access points, and PCI-E cards that have three antenna ports. PCs are often located under desks or routers in cabinets – places that massively block the Wi-Fi signal. With this stand, you can relocate your existing antennas by 1.5 meters to an optimal position (e.g., on the desk or PC case). The strong magnetic base ensures a secure hold ...

This compact 433 MHz omnidirectional antenna / rod antenna with 2dBi gain is suitable for short distances. The signal is radiated evenly in all directions thanks to the almost spherical radiation characteristics. The antenna is designed for indoor use. The omnidirectional radiator has a SMA connector with an articulated joint. The antenna is white, weighs just 10g and has the following dimensions: 10.8cm x 1cm

Better Wi-Fi reception through optimal positioning. This 4x4 MIMO magnetic base is the ideal solution for extending Wi-Fi antennas from the back of your PC, router, or control cabinet. It relocates four antenna connections by 1.5 meters to a better location. Thanks to the four RP-SMA ports, it is perfectly suited for modern high-end routers (Wi-Fi 6 / 4x4 MIMO) or PCIe Wi-Fi cards. The strong magnetic base adheres securely to PC cases, server racks, or the interior of vehicles and campers, wh...

This WiFi omnidirectional antenna has a performance gain of 5dBi, is suitable for the 5 GHz frequency band and thus for 802.11a/n applications. The dipole antenna is black, is suitable for indoor use and has an RP-SMA connector with an articulated joint.

This WiFi omnidirectional antenna has a performance gain of 7dBi, is suitable for the 5 GHz frequency band and thus for 802.11a/n applications. The rod antenna is black, suitable for indoor use and has an RP-SMA connector with an articulated joint and is simply screwed onto your WiFi device.

This WiFi omni antenna has a performance gain of 9dBi, is suitable for the 5 GHz frequency band and thus for 802.11a/n applications. The rod antenna is black, is suitable for indoor use and has an RP-SMA connector with an articulated joint and is simply screwed onto the WiFI device. The antenna has a signal opening angle of 360 ° horizontal and 12 ° vertical.

This WiFi omnidirectional antenna has a performance gain of 5dBi, is suitable for the 5 GHz frequency band and thus for 802.11a/n applications. The dipole antenna is gray, suitable for indoor and outdoor use and has an RP-SMA connector. The antenna has an extra sealing ring. The signal opening angle is 360 ° horizontally and 40 ° vertically.

No more weak reception. The CNT-400 is our most powerful coaxial antenna cable for long distances. With a diameter of approx. 1 cm, it is the "big brother" of standard cables and ensures that your LTE, 5G, or Wi-Fi signal arrives powerfully at the router even after 20 or 30 meters. It corresponds in performance and dimensions to the well-known cable types H1000, MRC400, or LMR-400. The robust, weatherproof jacket makes it ideal for permanent installation outside on the mast. We build your des...

No more cable clutter: Our H-155 Twin antenna cable combines two coaxial lines in one strand. This makes it the perfect solution for your 4G (LTE) or 5G MIMO antenna (2x2 MIMO). You only route one cable run but supply both ports of your router simultaneously. Low loss, flexible, and individually assembled for you with matching N male and SMA male connectors.HighlightsTwin / Dual Design (2-in-1): Two H-155 cables fused together – ideal for 4G & 5G MIMO applications (prevents cable mess). P...

Our H-155 antenna cable is your universal solution for high-frequency connections. Whether as a WiFi antenna cable, for your LoRaWAN gateway, or as an 4G extensionc cable: This low-loss cable reliably transmits signals up to 3 GHz. Use our configurator to order your individual antenna cable with the right connectors in your desired length.HighlightsVersatile Antenna Cable: Optimized for frequencies up to 3 GHz - ideal as WiFi (2.4 GHz), for LoRaWAN, GSM, UMTS, and LTE antenna cable. Weath...

If you want to get the maximum out of your wireless connection, our RF-240 Coaxial Antenna Cable is the right choice. This high-performance coaxial cable is perfect for applications up to 6 GHz. Whether as a WiFi antenna cable for 2.4 GHz and 5 GHz networks, as a high-quality feed line for your 5G or LTE antenna, or for your IoT or M2M project. Configure your individual coaxial antenna cable now in our configurator. We then manufacture it made-to-order just for you!HighlightsHigh-End Ante...

Weatherproof, IP67 rated CAT5e RJ-45 Ethernet plastic cable feed / gland with integrated O ring, RJ-45 socket and 25cm cable with RJ45 plug. The cable gland is particularly suitable for use on weatherproof Enclosures in outdoor areas.

The JARFT J2250-SMA 4x4 MIMO 5G/LTE window feed-through is the perfect solution for connecting a 2x2 MIMO 5G or LTE outdoor antenna to your indoor router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window cable can be easily routed through or laid inside a window frame without damaging or affecting the frame, window, or locking mechanism.Equipped with two SMA plugs and two SMA sockets, the feed-through ensures a secure and low-loss...

The JARFT J2250-RPSMA 2x2 MIMO WLAN window feed-through is the ideal solution for connecting a 2x2 MIMO WLAN outdoor antenna to your indoor WLAN router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window cable can easily be routed through a window frame or simply laid inside it without damaging or affecting the frame, the window, or the locking mechanism.Equipped with two RP-SMA plugs and two RP-SMA sockets, the window feed-through ...

The JARFT J2250-SMA 4x4 MIMO 5G/LTE window feed-through is the perfect solution for connecting a 4x4 MIMO 5G or LTE outdoor antenna to your indoor router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window cable can be easily routed through or laid inside a window frame without damaging or affecting the frame, window, or locking mechanism.Equipped with four SMA plugs and four SMA sockets, the feed-through ensures a secure and low-lo...

The JARFT J2250-RPSMA 4x4 MIMO WLAN window feed-through provides an excellent solution for connecting a 4x4 MIMO WLAN outdoor antenna to your indoor WLAN router or access point without the need for drilling. At 50 cm long and featuring an ultra-thin design, this window cable can easily be placed through or laid inside a window frame without causing any damage to the frame, window, or locking mechanism.Equipped with four RP-SMA plugs and four RP-SMA sockets, the feed-through ensures a st...

2x2 MIMO dual-band 2.4 / 5 - 7:1 GHz WiFi omnidirectional antenna for installation on ceilings, equipment cabinets, worktables, vending machines, machinery, or vehicles. The compact omnidirectional antenna has a gain of 3dBi in the 2.4 GHz as well as the 5 GHz and the new 6 GHz frequency bands, and a compact, robust plastic housing (available in black or white) that complies with the IP65 standard. Thus, the antenna can also be easily used as an outdoor antenna. On the underside of the WiFi a...

This compact 2x2 MIMO dual band 2.4 / 5 GHz WiFi omni-directional antenna is designed for installation on ceilings, equipment cabinets, work desks, vending machines, machinery, or vehicles. It features a compact design with a 3dBi @ 2.4GHz and 5dBi @ 5GHz frequency band. The antenna is housed in a sturdy, white plastic casing (also available in black) that meets the IP65 standard, making it suitable for outdoor use. The bottom of the WiFi antenna is equipped with a 2.5cm plastic thread and a ...

Dual-band 2.4 / 5GHz WiFi omnidirectional antenna designed for IoT, M2M, or automotive applications. This WiFiantenna is specifically designed for installation on ceilings, equipment cabinets, worktables, vending machines, machinery, or vehicles. The compact omnidirectional antenna has a gain of 3dBi in 2.4 GHz and 5dBi in 5 GHz WiFi frequency band. It features a compact, robust plastic housing (available in white or black) that complies with IP65 standards, allowing the antenna to be used ou...

The robust universal solution for IoT and M2M. The JARFT CA-24-04 is a compact 2.4 GHz Wi-Fi omnidirectional antenna with 5 dBi gain, designed specifically for permanent surface mounting. Whether on control cabinets, vending machines, vehicle roofs, or machine housings – thanks to the integrated threaded spigot and IP65 protection class, this antenna sits securely and weather-tight. It is the ideal choice for telemetry applications, kiosk systems, and industrial Wi-Fi. Available in black or w...

The JARFT J4GMB-14-DOMPA multiband 4G directional antenna provides a gain of up to 14dBi and supports all 4G frequency bands (800 MHz, 1800 MHz, 2600 MHz). Therefore, the antenna can be used universally for all 4G providers and significantly enhances your 4G connection.Due to its weatherproof design, the antenna can be easily used outdoors as an 4G outdoor antenna. Once properly aligned and mounted, this 4G directional antenna delivers consistent results and ensures a stable 4G data connect...

The JARFT J4GMB-12-OMOA multiband 2x2 MIMO 4G omnidirectional antenna provides a gain of up to 12dBi and covers all 4G frequency bands used in Germany and Europe (800, 1800, 2600 MHz). Therefore, the 4G antenna is universally suitable for all providers and 4G networks and does not require separate alignment due to its omnidirectional characteristic. By using this 4G multiband antenna, you can enhance your 4G connection.The design of the 4G antenna is compact, making it discreet and suitable...

Our weatherproof and robust 2x2 MIMO Multiband 5G / 4G (LTE) Antenna offers outstanding performance. With a gain of up to 14dBi and tremendous broadband capability, it covers all 5G / 4G frequency bands, making it a universal solution for all 5G or 4G data connections. The directional characteristics and strong signal focusing ensure stable 4G or 5G connections even over long distances, requiring alignment with the nearest transmitter mast from your provider. Thanks to its weatherproof housin...

The JARFT 5in1 Multiband Antenna combines five powerful antenna elements in one robust, compact housing. It provides you with reliable connectivity for LTE, WLAN, and GPS/GLONASS, ideal for mobile applications and fixed installations. With its weatherproof IP65 certification and a wide operating temperature range, this antenna is designed for demanding environments, always ensuring stable signal transmission. Easy mounting and pre-assembled 1.5m cables make installation straightforward and qu...

Multiband 2x2 MIMO 4G Omni-directional Antenna for installation on ceilings, equipment cabinets, work tables, vending machines, machinery, or vehicles. The compact omni-directional antenna provides a gain of 1-4dBi and features a compact, sturdy, plastic housing (available in black and white) that complies with the IP65 standard. Therefore, the antenna can be easily used outdoors. On the underside of the 4G antenna, there is a 2.5cm long plastic thread with a lock nut. A rubber lip on the hou...

This weatherproof (IP67 classified) RJ-45 ethernet cable feedthrough made of plastic with an integrated sealing ring is suited for use with outdoor Enclosures / boxes. It has RJ-45 socket and a LSA terminal block.

This coaxial adapter has the connector combination of FME male to SMA male. The adapter stands out for its solid quality, long lifespan, and low attenuation value.Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a coax adapter with FME male to SMA male connectors.As always with us, the following applies: If you are unsure which coaxial adapter you need, please feel free to contact us.

This 50 Ohm coaxial adapter features the connector combination of N male to N male. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.Such a coaxial adapter is used to convert between different coaxial connector formats. In this instance, it is an adapter with N male to N male connectors.As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This N bulkhead jack with a four-hole flange is known for its long lifespan and low attenuation.

This N bulkhead jack features center mounting and is known for its long lifespan and low attenuation

This 50-ohm coaxial adapter features the connector combination of N male to N female. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.Such a coaxial adapter is used to convert between different coaxial connector formats. In this instance, it is an adapter with N male to N female connectors.As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This coaxial adapter features the connector combination of N male to N female and is angled (90°). The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an angled coax adapter.As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This 50 Ohm coaxial adapter features the connector combination of N male to N male. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.Such a coaxial adapter is used to convert between different coaxial connector formats. In this instance, it is an adapter with N male to N male connectors.As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This coaxial adapter features the connector combination of N male to N female and is angled (90°). The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an angled coax adapter.As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This 50 Ohm coaxial adapter features the connector combination of RP-SMA female to RP-SMA female. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an adapter with RPSMA female to RPSMA female connectors.As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This coaxial adapter features the connector combination of RP-SMA female to RP-SMA male and is angled (90°). The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an angled coax adapter.As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This 50 Ohm coaxial adapter features the connector combination of RP-SMA female to RP-SMA male. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an adapter with RPSMA female to RPSMA male connectors.As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This 50 Ohm coaxial adapter features the connector combination of RP-SMA male to RP-SMA male. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an adapter with RP-SMA male to RP-SMA male connectors.As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This 50 ohm coaxial adapter has the connector combination of RP-SMA male to SMA female. The adapter stands out for its solid quality, long lifespan, and low attenuation value.Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a coax adapter with RP-SMA male to SMA female connectors.As always with us, the following applies: If you are unsure which coaxial adapter you need, please feel free to contact us.

This coaxial adapter features the connector combination of RP-SMA female to SMA female and is angled (90°). The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an angled coax adapter.As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This 50 Ohm coaxial adapter features the connector combination of RP-SMA male to SMA male. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.Such a coaxial adapter can be used to convert between different coaxial connector formats. In this case, it is an adapter with RP-SMA male to SMA male connectors.As always with us, please remember: If you are unsure about which coaxial adapter you need, feel free to contact us.

This 50-ohm coaxial adapter features the connector combination of RP-TNC male to N female. The adapter is known for its solid quality, resulting in a long lifespan and low attenuation.

This 50 ohm coaxial adapter has the connector combination of SMA male to RP-SMA female. The adapter stands out for its solid quality, long lifespan, and low attenuation value.Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a coax adapter with SMA male to RP-SMA female connectors.As always with us, the following applies: If you are unsure which coaxial adapter you need, please feel free to contact us.

The perfect link for your specialized antenna setups: This high-quality 50 Ohm coaxial adapter (T-piece) acts as a reliable splitter for high-frequency signals. Equipped with the connector combination of 1x RP-SMA Female to 2x RP-SMA Female (three female connectors in total), this adapter is excellently suited to connect cable runs, split signals, or simply adapt connector formats. The adapter stands out due to its extremely solid build quality, which not only guarantees a long Service life b...

The secure connection for your Antenna Cables: This high-quality 50 Ohm coaxial adapter is the ideal intermediate piece for demanding Wi-Fi and radio projects. Equipped with the connector combination of RP-SMA Female to N Female (both sides female), this adapter is the perfect problem solver for joining two existing cable runs together. For example, you can use it to seamlessly connect a long outdoor cable (with an N Male connector) to a pigtail cable (with an RP-SMA Male connector). In addit...

The perfect adaptation for your Antenna Cables: This high-quality 50 Ohm coaxial adapter solves the problem of incompatible connectors in the Wi-Fi and high-frequency sectors in no time. Equipped with the connector combination of RP-SMA Female to N Male, it acts as a reliable link. It is ideally suited, for example, to connect an existing pigtail cable (with an RP-SMA Male connector) to a device, enclosure, or antenna with a large N Female socket. In addition to the extremely solid build qual...

The perfect link for your antenna setups: This high-quality 50 Ohm coaxial adapter (T-piece) acts as a reliable splitter for high-frequency signals. Equipped with the connector combination of 1x RP-SMA Male to 2x RP-SMA Female, this adapter is excellently suited to split the signal from a router port to two Wi-Fi Antennas, for example, or simply to adapt connector formats. The adapter stands out due to its extremely solid build quality, which not only guarantees a long Service life but also e...

The perfect bridge for your outdoor Wi-Fi projects: This high-quality 50 Ohm coaxial adapter connects the world of compact home routers with professional outdoor antenna technology. Equipped with the connector combination of RP-SMA Male to N Female, it is the ultimate problem solver for connecting thick, low-loss Antenna Cables (with N connectors) to standard Wi-Fi access points or routers (with RP-SMA sockets). The N connector is the absolute standard for robust outdoor use and is significan...

The direct and compact connection without cable clutter: This high-quality 50 Ohm coaxial adapter is the perfect solution for directly connecting two female receptacles from the Wi-Fi and outdoor radio world. Equipped with the connector combination of RP-SMA Male to N Male (both sides with internal threads), it acts as a seamless link. It is ideal, for example, for screwing a standard Wi-Fi router (RP-SMA) directly to an outdoor enclosure, lightning arrestor, or directional antenna (N-Type) w...

The perfect bridge for your Wi-Fi upgrades: This high-quality 50 Ohm coaxial adapter is the ideal problem solver when you want to combine modern networking equipment with proven Antennas. Equipped with the connector combination of RP-SMA Male to RP-TNC Female, it acts as a seamless link. For example, it allows you to connect older but extremely powerful Antennas or cable runs (with RP-TNC connectors, often found on Cisco or Linksys gear) to brand-new Wi-Fi routers or access points (with RP-SM...

The smart problem solver for tight spaces: This angled 50 Ohm coaxial adapter (90°) is the perfect intermediate piece when things get cramped behind the router or in the server cabinet. It features the clever connector combination of RP-SMA Male to Standard SMA Male. This builds the perfect bridge to connect, for example, Antennas from the Wi-Fi sector (RP-SMA) to cellular or GPS devices (SMA) – and routes it elegantly around the corner without kinking the cable! The adapter stands out due to...

The perfect link between enterprise hardware and standard Antennas: This high-quality 50 Ohm coaxial adapter seamlessly bridges the gap between two popular Wi-Fi standards. Equipped with the connector combination of RP-TNC Male to RP-SMA Female, it is the ideal problem solver for connecting standard Wi-Fi Antennas to professional routers (e.g., from Cisco). The RP-TNC connector is characterized by its robust thread, while RP-SMA offers maximum flexibility in antenna selection. In addition to ...

The reliable intersection for your high-frequency signals: This high-quality 50 Ohm coaxial adapter (T-piece) is the perfect splitter for your antenna setups. It is equipped with the classic Standard SMA connector combination: 1x SMA Male to 2x SMA Female. This adapter is ideal, for example, for splitting an LTE or GPS signal into two branches or cleanly routing cable paths together. In addition to the solid and robust build quality, which guarantees an extremely long Service life, this T-pie...

The solid and direct connection for your cellular setup: This high-quality 50 Ohm coaxial adapter is the perfect solution for directly connecting two female receptacles from the LTE and outdoor radio world. Equipped with the connector combination of Standard SMA Male to N Male (both sides with internal threads and pins), it acts as a seamless link. It is excellently suited, for example, to screw a standard LTE/5G router or GPS receiver (SMA) directly to an outdoor enclosure, lightning arresto...

The robust bridge for your industrial and measurement hardware: This high-quality 50 Ohm coaxial adapter is the ideal problem solver when professional radio technology meets massive outdoor Antennas. Equipped with the connector combination of TNC Male to N Female, it seamlessly connects devices featuring the threaded TNC standard (often found on industrial routers, RFID hardware, or measurement equipment) to thick, low-loss N-Type Antenna Cables. Unlike BNC connectors, the thread of the TNC c...

The pro cable for Helium miners and Wi-Fi networks. The CNT-400 antenna cable is an extremely low-loss high-end coaxial cable designed specifically for applications where signal strength is critical. Technically, it meets the standards of well-known cable types such as LMR-400 or HDF-400. It comes pre-assembled with an N-Male connector (for professional outdoor Antennas) and an RP-SMA Male connector (for Helium miners and Wi-Fi access points). Thanks to the UV and moisture-resistant jacket, i...

The coaxial antenna cable type H-155 is a flexible low-loss antenna cable. The cable has double shielding and is well suited for applications up to 3 GHz. The H-155 cable is delivered rolled up to 100m.

The coaxial antenna cable type H-155 is a flexible low-loss antenna cable. The cable has double shielding and is well suited for applications up to 3 GHz. The H-155 is sold by meter.

The RF-240 coaxial cable is a high quality and super low loss coax cable which can be perfectly used for appliances up to 6GHz (GSM, 3G, 4G, WiFi frequencies). The RF-240 cable is delivered rolled up as a 100m reel.

The RF-240 coaxial antenna cable is a very low-loss, high-quality antenna cable. Due to the low attenuation (double shielding) the cable is very well suited for the WiFi, GSM, 3G, 4G and 5G frequency bands and applications up to 6GHz. The RF-240 cable is cut and delivered by the meter.

Flexible Coaxial Pigtail / Adapter: SMA Female to CRC-9 Male: This flexible coaxial pigtail features an SMA female connector and a CRC-9 male connector, utilizing a 25 cm long RG-178 cable. It is commonly used to connect an LTE or 5G antenna to a mobile LTE / 5G router. Some of these compact mobile routers use the CRC9 connector format for external antenna connections, while standard LTE or 5G antennas are typically equipped with SMA connectors. Advantages of the Pigtail: The pigtail offers a...

Flexible Coaxial Pigtail / Adapter: SMA Female to SMA Male: This flexible coaxial pigtail features an SMA female connector and an SMA male connector, utilizing a 25 cm long RG-178 cable. It is commonly used to connect an LTE or 5G antenna to an LTE / 5G router. Rigid and immovable antenna cables can create a high leverage effect on the antenna connection of your LTE or 5G router. To reduce this strain, you can use this pigtail. Advantages of the Pigtail: Rigid and immovable antenna cables can...

Flexible Coaxial Pigtail / Adapter: SMA Female to TS-9 Male:This flexible coaxial pigtail features an SMA female connector and a TS-9 male connector, utilizing a 25 cm long RG-178 cable. It is commonly used to connect an LTE or 5G antenna to a mobile LTE / 5G router. Many of these compact mobile routers use the TS-9 connector format for external antenna connections, while standard LTE or 5G antennas are typically equipped with SMA connectors.Advantages of the Pigtail:The pigtail offers a fl...

This high-quality coaxial pigtail reliably connects devices with a U.FL connector to external antennas or components with an SMA female connector. With a length of 20 cm, it offers optimal flexibility for installations in confined spaces without unnecessary signal loss. It is ideal for WLAN, LTE, GPS, and IoT applications where a robust and stable RF connection is crucial. The precise manufacturing ensures long-lasting performance and minimizes the risk of connection interruptions.Highligh...

The coaxial pigtail is equipped with a FAKRA Z and an SMA socket. The pigtail is made on RG-178 cable and has a length of 25cm.

Coaxial pigtail with connector FME male to CRC-9 male. The cable used is an RG-178 cable with a length of 25cm. Further information about CRC-9 connector can be found below in the description.

Coaxial pigtail with connector combination FME male to MC-CARD male. The cable used is an RG-178 cable with a length of 25cm. Further information about MC-CARD connector can be found below in the description.

Coaxial pigtail with connector combination FME male to SSMB male. The cable used is an RG-178 cable with a length of 25cm. Further information about SSMB connector can be found below in the description.

Coaxial pigtail with connector combination SMA female to MC-CARD male. The cable used is an RG-178 cable with a length of 25cm.

High quality coaxial pigtail with the connector combination U.FL plug to N female socket. The pigtail has a length of 25cm and is made with RG-178 cable. The socket is supplied with a lock nut and washer and can therefore be used as a bulkhead socket.

High-quality assembled coaxial pigtail with the connector combination U.FL plug to N male plug. The low loss pigtail has a length of 25cm and is made on RG-178 cable.

The bridge from board to antenna. This high-quality coaxial pigtail connects internal radio modules (with U.FL / IPEX connector) to external Wi-Fi antennas (RP-SMA). With a length of 25 cm, it offers enough flexibility for clean routing inside PC cases, routers, or industrial boxes. The cable is made of robust RG-178, providing better shielding and durability than standard wires. The RP-SMA jack is designed as a "bulkhead": Thanks to the included nut and washer, you can screw it firmly into a...

This high-quality 3-way coaxial antenna splitter, designed with a 50-ohm impedance, is specifically tailored for the frequency range of 800 to 2500 MHz. With its wide frequency range, it provides reliable and efficient signal distribution for various applications such as mobile communication, Wi-Fi, broadband communication, and more. The splitter features an N-type connector as the signal input, allowing for easy and stable connection to your main antenna. Additionally, it offers three N-type...

This high-quality 4-way coaxial antenna splitter, designed with a 50-ohm impedance, is specifically tailored for the frequency range of 800 to 2500 MHz. With its wide frequency range, it provides reliable and efficient signal distribution for various applications such as mobile communication, Wi-Fi, broadband communication, and more. The splitter features an N-type connector as the signal input, allowing for easy and stable connection to your main antenna. Additionally, it offers four N-type ...

This weatherproof 2-way coaxial antenna splitter, featuring a 50-ohm impedance, is perfectly suited for the frequency range of 5000 to 6000 MHz. It comes equipped with an N-type connector as the signal input and two N-type connectors as the signal outputs. Its robust construction makes it ideal for outdoor use. With this 2-way coaxial antenna splitter, you can effectively divide your antenna signals, thereby achieving improved connectivity and performance for your wireless communication syste...

This high-quality 3-way coaxial antenna splitter, designed with a 50-ohm impedance, is specifically tailored for the frequency range of 5000 to 6000 MHz. With its wide frequency range, it provides reliable and efficient signal distribution for various applications. The splitter features an N-type connector as the signal input, allowing for easy and stable connection to your main antenna. Additionally, it offers three N-type connectors as signal outputs, enabling the distribution of the signal...

This high-quality 4-way coaxial splitter SP-58-03 is specifically designed for the demanding frequency range of 5000 to 6000 MHz. It enables reliable and efficient signal distribution for your wireless communication systems. With one N-female input and four N-female outputs, you can easily connect multiple devices to a single antenna. Its weatherproof construction also guarantees high resistance to environmental influences, making it ideal for outdoor use.HighlightsWide Frequency Range: Op...

Stop signal reflections: This 50 Ohm Coaxial Terminator (Dummy Load) with N-Male connector seals off unused ports properly. An open port acts physically like a mirror, reflecting signals back into your system ("standing waves"). This isn't just annoying for Wi-Fi or 5G, but in any radio application. With this little helper, you simply screw the problem shut. It works largely broadband from 0 to 6 GHz, making it extremely versatile: From Ham Radio to RFID systems and lab measurements. High-qua...

The lifesaver for your Wi-Fi gear: This gold-plated 50 Ohm RP-SMA Terminator is specially designed for Wi-Fi routers, access points, and Helium miners. It professionally seals open antenna ports. An open port acts like a mirror ("standing waves"), leading to interference and potentially damaging your transmitter. Since almost all Wi-Fi devices use the "Reverse Polarity" (RP-SMA) standard, this connector features a hole in the center instead of a pin. High-quality gold plating for best signal ...

The premium solution against signal reflections: This gold-plated 50 Ohm SMA Terminator (Dummy Load) perfectly seals open ports on your router, LTE modem, or measuring instrument. An open SMA port acts like a mirror for radio waves ("standing waves"), causing interference and, in the worst case, damaging your transmission equipment (e.g., on FPV drones). This high-quality, gold-plated terminator ensures the best electrical contact and cleanly absorbs the energy. Suitable for everything from 0...

Is your antenna cable too short? Solve the problem without cable clutter using this Twin extension cable for LTE and 5G. Many outdoor Antennas come with short, permanently attached cables. This dual cable (two lines in one string) cleanly extends your MIMO connection all the way to the router. Equipped with SMA-Male to SMA-Female connectors, you simply click it between your existing cable and the router. Available in 5m and 10m lengths, it offers an excellent compromise between flexibility an...

End the cable clutter: Our LTE & 5G twin antenna cable bundles two lines in one string. Since modern mobile connections (MIMO) always require two cables anyway, this CLF-200 twin cable saves you the hassle of routing two separate wires. It is available in lengths from 2.5m to 10m and comes pre-assembled with N-Male connectors (for the outdoor antenna) and SMA-Male connectors (for your router). This high-quality cable offers the perfect compromise between low signal loss and high flexibility d...

Do you require a manual configuration or professional support from an experienced technician? Are you stuck with your current configuration or facing a technical issue that demands a quick resolution? No problem! Our team offers reliable remote support for a variety of leading manufacturers, including Teltonika, Ubiquiti, MikroTik, LigoWave, TP-Link, ALFA Network, and many more.Book your Prepaid Service Unit now and secure 30 minutes of dedicated support. We will flexibly schedule the appoint...

Do you require a manual configuration or professional support from an experienced technician? Are you stuck with your current configuration or facing a technical issue that demands a quick resolution? No problem! Our team offers reliable remote support for a variety of leading manufacturers, including Teltonika, Ubiquiti, MikroTik, LigoWave, TP-Link, ALFA Network, and many more.Book your Prepaid Service Unit now and secure 60 minutes of dedicated support. We will flexibly schedule the appoint...

The upgrade for your Wi-Fi range: Our RF-240 coaxial antenna cable connects your router directly to a powerful WiFi outdoor antenna. It comes pre-assembled with an N-Male connector (for the antenna) and an RP-SMA Male connector (for the router). Thanks to double shielding and a high-quality solid copper conductor, this "Low Loss" cable performs significantly better than standard cables. The UV-stable PE jacket allows for permanent outdoor installation. Available in fixed lengths from 1m to 10...

Too short is a thing of the past: With this RF-240 coaxial antenna cable, you can easily extend your existing Wi-Fi cable or antenna connection. It features an RP-SMA Male connector on one side and an RP-SMA Female connector on the other – fitting almost all standard Wi-Fi routers and Helium miners. Unlike thin standard extensions, this high-quality "Low Loss" cable is designed for low attenuation, ensuring your signal remains strong even after extension. Thanks to its weatherproof jacket, it...

This ultra-thin window cable/window feedthrough is 40 cm long and equipped with an RP-SMA male plug and an RP-SMA female socket. This makes the cable ideal for routing the antenna cable of a WiFi antenna through a window. Simply place the flat cable in the frame with the window open and then carefully close the window.