Your Professional Interface for Every Project
Whether you're building a weatherproof Enclosure for a WiFi Access Point, calibrating a measurement device, or want to give your DIY Antenna a professional connection – this Coaxial Adapter is the bridge between your internal electronics and the outside world. It creates a defined, high-performance interface that ensures clean signals and maximum reliability. Installation via central mounting is incredibly simple and requires only a single hole in your mounting plate or Enclosure wall.
Quality You Can Feel and Measure: No Room for Signal Loss
In high-frequency technology, every detail counts. That's why this adapter consists of a solid, nickel-plated brass housing, which is not only mechanically stable but also optimally shielded. The inner conductor features gold-plated contacts to reduce contact resistance to an absolute minimum and permanently prevent corrosion. High-quality PTFE (Teflon) is used as insulating material, which retains excellent dielectric properties even at frequencies up to 11 GHz and prevents signal distortion.
Installation Made Easy: Secure Hold with Central Mounting
Forget complicated installations with four screws. This N-Female Bulkhead Jack with central mounting (also called bulkhead fitting) is simply inserted through a bore and secured from behind with the included locking washer and hex nut. This ensures a firm and twist-proof fit. Internally, the inner conductor of your Coaxial Antenna Cables is neatly soldered to the designated solder cup, ensuring a permanently secure electrical connection.
Built for Eternity: Robustness for Outdoor and Industry
This adapter is no fair-weather hero. With an extremely wide operating temperature range of -65 °C to +165 °C and a mechanical load capacity of at least 500 mating cycles, it is designed for tough use. The N-standard screw thread not only ensures a vibration-proof connection but also makes the connection weatherproof when combined with a suitable connector. This makes this weatherproof N-Female Jack the first choice for installations in harsh industrial environments or in Outdoor Antennas applications.
Strengths & Notes at a Glance
- Pro: Extremely robust and durable construction from brass and PTFE.
- Pro: Excellent RF properties due to 50-Ohm design and gold-plated contacts.
- Pro: Vibration-proof and weatherproof screw connection.
- Pro: Universal frequency range up to 11 GHz, ideal for WiFi, 5G Antennas, and more.
- Note: Installation requires drilling and soldering experience for the internal connection.
- Note: Requires more installation space than more compact connector systems like SMA.
Specifications & Features
| Product Classification: | Accessories (Passive RF Connector) |
| Item Name: | Coaxial Adapter - N-Female Jack, Bulkhead Jack, Central Mounting |
| Manufacturer Part Number (MPN): | N-14-13-TGN |
| EAN: | 4251028601519 |
| Connector Type: | N-Female (N-Female / Jack) |
| Impedance: | 50 Ohm |
| Frequency Range: | DC to 11 GHz |
| Mounting Type: | Bulkhead Jack / Bulkhead Fitting |
| Fastening Type: | Central Mounting (Single Hole Mount) |
| Inner Conductor Connection: | Solder Cup |
| Housing Material: | Brass, nickel-plated |
| Contact Material (Inner): | Brass / Copper Alloy |
| Contact Plating (Inner): | Gold-plated |
| Dielectric Material: | PTFE (Polytetrafluoroethylene) |
| Operating Temperature Range: | -65 °C to +165 °C |
| Coupling Mechanism: | Thread (5/8-24 UNEF) |
| Mating Cycles: | ≥ 500 |
| Recommended Tightening Torque (Nut): | approx. 1.7 Nm |
| Recommended Tightening Torque (Coupling): | 0.8 - 1.1 Nm |
| Operating Voltage (max.): | 335V |
| Dielectric Withstanding Voltage: | 1000V RMS |
| Insulation Resistance: | ≥ 5000 MΩ |
| Contact Resistance (Inner Conductor): | ≤ 3.0 mΩ |
| Contact Resistance (Outer Conductor): | ≤ 2.0 mΩ |
| Weight: | approx. 25 - 30 g |
Scope of Delivery
| 1 x Coaxial Adapter N-Female Jack (incl. hex nut and locking washer) |
Frequently Asked Questions (FAQ)
Which cables is your built-in socket designed for, and how do you connect it correctly?
You connect this socket internally with a Coaxial Cable, for example, a Coaxial Pigtail, to your electronics. You solder the inner conductor of the cable directly to the solder cup of the socket. You simply connect the shielding to the ground of your Enclosure. Remember: The socket is not designed for direct mounting of a thick outdoor cable.
Is the N-socket waterproof, and can I use it for my outdoor project?
Absolutely! If you screw on a suitable N-Coaxial Connector, the connection is weather and dustproof thanks to the thread and seals. The only important thing is that you install the socket itself cleanly and firmly into your enclosure with the sealing ring, so that no moisture can penetrate there either.
Does my regular WiFi Antenna with an RP-SMA connector fit this N-socket?
Not directly, because this is an N-socket. Most WiFi Antennas for home use have an RP-SMA or SMA connector. But don't worry, you only need a suitable Coaxial Adapter (e.g., 'N-male to RP-SMA-female') to connect your antenna without any problems.
Which frequencies is the adapter suitable for? Does it also work with 5G and Wi-Fi 6E?
Yes, absolutely! You can perfectly use this Coaxial Adapter for all common frequencies like 2.4 GHz, 5 GHz WiFi, 4G, and 5G. It is even specified up to 11 GHz, which gives you huge reserves and guarantees top performance for future standards like WiFi 6E in the 6-GHz band, ideal for Dual-Band / WiFi 6E / WiFi 7 Antennas.
What is the advantage of this central mounting compared to a 4-hole flange socket?
The big advantage for you is the super easy Mounting Systems. For this socket, you only need a single round hole in your enclosure. Then you push it through and counter it with the nut – done! A flange socket is more complex, as you would have to drill four additional holes for the screws.
Does the quality of this adapter really make a difference for my signal?
And how! A high-quality Coaxial Adapter like this is crucial for your signal strength and range. Thanks to precise 50-ohm impedance, gold-plated contacts, and top insulation, you minimize signal losses. A cheap adapter, on the other hand, can noticeably attenuate your signal and lead to an unstable connection. Here, you invest directly in the performance of your project.
Homepage: https://www.jarft.eu/
