Mikrotik

The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT gives possibility to turn antenna within 190°. With the quickMOUNT it is possible to simultaneously mount two SXTs, thus creating a repeater access point or creating large sector coverage.

The quickMOUNT pro is a advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment using integrated graduated scale. You can use the quickMOUNT pro with any pole mountable device or Mikrotiks small mounting clip with weight less than 1.5 kg.

The MikroTik mANT 15s is a powerful 5GHz dual-polarization sector antenna with a signal beam angle of 120 degrees (horizontal) and a power gain of 15dBi. The mANT 15s is designed for use with the MikroTik WiFi systems BaseBox, NetBox and NetMetal, but can also be operated with all other WiFi systems. It has two RP-SMA ports for connecting to WiFi routers.

The RB260GS is a small SOHO switch. It has five Gigabit Ethernet ports and one SFP cage powered by an Atheros Switch Chip. Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

The RB260GSP is a small SOHO switch. It has five Gigabit Ethernet ports and one SFP cage powered by an Atheros Switch Chip. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.

The hEX lite is a small five port ethernet router in a nice plastic case. Not only this is an attractive looking tiny SOHO unit, its price is lower than the RouterOS license alone - there simply is no choice when it comes to managing your wired home network, the hEX lite has it all.

hEX PoE lite is a small five port ethernet router in a plastic case, it has a USB 2.0 port and PoE output. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded. It is affordable, small and easy to use. With it’s compact design and clean looks, it will fit perfectly into any SOHO environment.

hEX is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a full size USB port. This new updated revision of the hEX brings several improvements in performance.

hEX S is a six port wired Gigabit router for locations where wireless connectivity is not required. Compared to the hEX, the hEX S features an SFP port and PoE output on the last port.

The mAP is a tiny size wireless Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, PoE and power jack. In addition to using this device as a small and portable AP, it also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device. The microUSB port can also be used to connect a 4G USB modem and make the mAP a 4G router.

The MikroTik hAP lite (RB941-2ND) is an ideal little device for your apartment, house or office. It supports button triggered WPS, for the convenience of not typing a complicated password, has an integrated 10/100 4-Port ethernet switch and a Level 4 RouterOS license.

This small home access point MiktoTik hAP (RB951Ui-2nD) is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas. The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included. The hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

MikroTik RB3011UiAS-RM is a multi port device, our first to be running an ARM architecture CPU for higher performance than ever before. The RB3011UiAS-RM has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a SuperSpeed full size USB 3.0 port, for adding storage or an external 3G/4G modem. Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port.

The MikroTik RB4011iGS+RM is an amazingly powerful router with 10 x Gigabit RJ45 ports, 1 x SFP+ 10Gbps interface and IPsec hardware acceleration for a great price! The RB4011 uses a quad core Cortex A15 CP. The unit is equipped with 1GB of RAM, can provide PoE output on port 10 and comes with a compact and professional looking solid metal enclosure in matte black. RB4011iGS+RM (Ethernet model) includes two rackmount ears that will securely fasten the unit in a standard 1U rack space.

The RB951Ui-2HnD is a SOHO (Small office / home) WiFi Access Point with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 802.11b/g/n wireless access point with WiFi antennas built in. It has a 600MHz CPU,128MB of RAM and PoE output function for Ethernet-Port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

The hAP ac lite (RB952Ui-5ac2nD) is a Dual-concurrent Access Point, that provides WiFi coverage for 2.4GHz and 5GHz frequencies at the same time. Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11a/n/ac 5GHz wireless, USB port for USB 4G modem and a RouterOS L4 license. The omnidirectional antennas allow to mount the hAP ac lite in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location.

The MikroTik hAP ac lite TC (RB952Ui-5ac2nD-TC) is a 802.11ac Access Point, that provides WiFi coverage for 2.4GHz and 5GHz frequencies at the same time. Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11a/n/ac 5GHz wireless, USB port for USB 4G modem and a RouterOS L4 license. The design of the Mikrotik hap ac Lite TC allows it to be positioned either horizontally or vertically in the office or at home. A wall mounting kit is also included.

The hAP ac is a universal home or office wireless device. It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2.4 GHz 802.11 b/g/n and 5 GHz a/n modes. The omnidirectional antennas allow to mount the hAP ac in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location. Other helpful features include a USB port for attaching storage or a 4G modem, PoE out and an SFP cage, for connecting active or passive optical network modules.

The MikroTik hAP ac2 (RBD52G-5HacD2HnD-TC) is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4 GHz and 5 GHz frequencies at the same time. Five 10/100/1000 Ethernet ports provide Gigabit connections for your wired devices, USB can be used for external storage or 4G/LTE USB modem, and device supports IPsec hardware acceleration. New design universal case allows unit to be positioned either horizontally (desktop) or vertically (tower case). Wall anchored mounting kit is provided.

MikroTik hAP ac3 is a dual-band access point that simultaneously offers 802.11ac Wi-Fi coverage for 2.4 GHz and 5 GHz frequencies - With 5 Gigabit Ethernet ports, 256 MB of RAM and quad-core CPU, hAP ac3 can satisfy even the biggest and most demanding households. With PoE support, it can power or be powered by other devices. There is a 128 MB NAND and a full-size USB port that you can use to add extra storage. The new enclosure allows mounting the device vertically or horizontally. A wall mount set is also included.

It's time to supercharge your home network with the Generation 6 wireless network and our latest addition to the beloved hAP series. The MikroTik hAP ax2 has everything you might need in a primary home access point - and more! Forget endless reviews and comparisons - this is the perfect device for 99% of homes. The modern quad-core CPU running at 864 MHz combined with a solid GB of RAM packs a hefty punch when it comes to heavy operations like complex firewall rules, IPsec hardware encryption, using more threads or experimenting with the most advanced RouterOS features. And with the addition of WPA3 advanced encryption support, you’re safer than ever before. The hAP ax2 has a total bandwith of 1774 Mbps.

MikroTik wAP ac is a WiFi accesspoint with full RouterOS capabilities. The wAP ac is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer. Of course, this 802.11ac access point can also be used indoors and is also fully compatible with older WiFi standards.

MikroTik wAP ac (RBwAPG-5HacD2HnD) is a Wifi accesspoint with full RouterOS capabilities. The wAP ac is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch or anywhere else where you need wireless access from your phone or computer. Of course, this 802.11ac access point can also be used indoors and is also fully downward compatible with older WiFi standards.

The cAP (RBcAP2nD) is the first Mikrotik dual-stream AP operating in the 2.4 GHz frequency band. The timeless design makes the device harmonize with the decor of many rooms. This access point is perfect for both home and hotel business, airports, shopping malls, etc. The cAP can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

The cAP ac (RBcAPGi-5acD2nD) is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2.4 GHz 802.11b/g/n and 5 GHz in a/n/ac standards, and will provide coverage in 360 degrees around it. Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

The cAP ac XL (RBcAPGi-5acD2nD-XL) is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2.4 GHz 802.11b/g/n and 5 GHz in a/n/ac standards, and will provide coverage in 360 degrees around it. Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac XL supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

MikroTik cAP ax (cAPGi-5HaxD2HaxD) is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2.4 GHz 802.11b/g/n(ax and 5 GHz in a/n/ac/ax standards, and will provide coverage in 360 degrees. Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ax supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.

The MikroTik Chateau 5G ax is a powerful dual-band router for 5G and 4G reception. It has 2 external 5G antennas with SMA connection and supports all common 5G and 4G frequencies. The MikroTik Chateau 5G ax has 4 Gigabit Ethernet ports and a 2.5 Gigabit Ethernet port. The integrated 802.11ax WiFi Accesspoint enables data rates of up to 1.774 Mbps in dual-chain operation. The modern quad-core CPU and 1GB RAM enable high performance even with complex network functions. Thanks to the quick setup in the web interface, the configuration is completed in no time.

MikroTik Groove 52HPn is a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has a 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2.4 or 5GHz wireless mode, and high 500mW output power!

MikroTik Groove 52HPacn is a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4 GHz or 5 GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless.

MikroTik GrooveA 52HPacn is a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4 GHz or 5 GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilise the full benefit of 802.11ac high speed wireless. This version can also operate Accesspoint-Mode. A dualband WiFi omni Antenna is included.

MikroTik Metal 52 ac is a completely waterproof and rugged outdoor wireless device with a super high output power.Now with 802.11ac support, a Gigabit Ethernet port and a selectable wireless band (2.4 GHz or 5 GHz, up to 80 MHz wide channel). The new Gigabit port will help you utilize the full benefit of 802.11ac high speed wireless.

MikroTik OmniTIK 5 is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for SXT, or for any other 802.11 standard device. Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbps aggregate throughput.

OmniTIK 5 ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.

BaseBox 2 is a weatherproof 2.4GHz WiFi accesspoint from MikroTik based on the RouterBoard RB912. The maximum TX-Power is 30dBm / 1000mW and on the top are two RP-SMA connectors which are both weatherproof. At the bottom side is a USB-Port and a Gigabit Ethernet-Port.

MikroTik BaseBox 5 is a weatherproof WiFi accesspoint based on the RB912 RouterBoard. The maximum TX-Power is 30dBm / 1000mW and on the top side are two RP-SMA connectors which are both weatherproof. At the bottom is a USB-Port and a Gigabit Ethernet-Port. The RouterBoard RB912UAG-5HPnD-OUT has an Atheros CPU with 600MHz.

The mANT LTE 50 antenna is designed for use in LTE networks and offers wide frequency coverage. This enables the use of different LTE bands to ensure optimal connectivity in different regions and network infrastructures. This antenna provides 5 dBi signal gain, resulting in improved signal range and strength. This makes it ideal for use in areas with weaker mobile signals and ensures a stable wireless connection. The mANT LTE 50 antenna is designed for outdoor use and has a robust housing that protects it from the effects of the weather. The weatherproof design ensures reliable performance in various environmental conditions. The antenna is easy to install and integrate into existing networks. It is compatible with most LTE devices and routers. Installation can be carried out on buildings as well as on poles or other suitable structures.

Netbox 5 is a robust and weatherproof 5GHz WiFi access point from MikroTik supporting the 802.11ac standard for wireless speeds up to 866 Mbps. The enclosure is made of plastic and can be used outdoors. There are two external RP-SMA connectors on the top of the access point.

The MikroTik ATL LTE18 Kit is an advanced 4G solution designed for fast and stable internet connection in rural and urban areas. It offers an impressive speed of up to 1Gbps, allowing users to have a fast and reliable internet connection regardless of cell phone signal strength or weather conditions. The kit features a Category 18 4G modem and a Gigabit Ethernet port with PoE (Power over Ethernet) functionality. This allows you to transfer data at speeds of up to 1 Gbps. The kit also supports 4x4 MIMO (Multiple-Input-Multiple-Output), which enables higher speeds and better signal quality. Thanks to the quick setup in the web interface, the configuration is completed in no time.

MikroTik NetMetal 5 SHP is a high power 2x2 dual chain 802.11ac wireless access point with two RP-SMA connectors for external antennas. Thanks to the 802.11ac WiFi standard and the 256-QAM modulation the NetMETAL 5SHP peaks at data rates of 1.3Gbps.

The MikroTik LHG LTE6 Kit is an advanced wireless communications device designed to provide premium internet connectivity in areas with limited network coverage. This innovative device combines the 4G technology with a powerful design to provide users with ultra-fast internet speeds and reliable connectivity. With its advanced 4G technology, it offers ultra-fast internet speeds and stable network coverage. The MikroTik LHG LTE6 is equipped with the LTE CAT6 standard, which allows speeds of up to 300 Mbps in the downlink and 50 Mbps in the uplink. It has a highly sensitive built-in 4G modem and a powerful 17dBi 4G panel antenna that ensures optimal signal quality and stability, even in remote areas with weak network reception.

MikroTik NetMetal 5 (Model: RB922UAGS-5HPacD-NM) version is equipped with a high power 2x2 dual chain 802.11ac wireless radio and two RP-SMA connectors for external WiFi antennas. It has an additional miniPCI-express slot which can be used for a 3G/4G modem or an additional wireless card,

The NetMETAL 5 / RB922UAGS-5SHPacT-NM is a completely new 802.11ac product in a waterproof metal enclosure. Its rugged design is made to withstand the toughest conditions, but at the same time is easy to use and can be opened and closed with one hand. The solid aluminum enclosure also works as a reliable heat-sink for it’s high output power radio.

The MikroTik SXT LTE6 Kit is a powerful solution for wireless network applications that require a reliable and fast Internet connection. This kit combines the latest 4G technology with advanced networking features to ensure robust and versatile connectivity. The SXT LTE6 Kit supports 4G Cat6, meaning it enables download speeds of up to 300 Mbps and upload speeds of up to 50 Mbps. This impressive performance ensures a fast and reliable internet connection for various applications. The kit has an integrated 4G antenna with 9dBi power gain and a 60° signal beam angle, which was specially developed for optimal signal strength and range. The antenna is compact and ensures efficient signal transmission, even in areas with weak reception. With dual SIM support, the SXT LTE6 Kit offers additional flexibility when choosing mobile providers. You can insert two SIM cards and seamlessly switch between them to ensure uninterrupted connectivity.

MikroTik LHG 2 is a 2.4GHz WiFi CPE with a powerful, dual polarized 18dBi Grid Antenna. This is perfect for point-to-point connections over long distances. The MikroTik LHG 2 uses the NV2 TDMA protocol and is designed for outdoor use.

The LHG 5ac is a compact and light 802.11 ac wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and is specially desiigned for outdoor appliances.

MikroTik CRS305-1G-4S+IN is a compact yet very powerful switch, featuring four SFP+ ports, for up to 10 Gbit per port. The device has a 1 Gbit copper ethernet port for management access and two DC jacks for power redundancy. The device is a very sleek and compact metallic case without any fans, for silent operation.

MikroTik CRS326-24G-2S+RM (Cloud Router Switch) is a SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS.

MikroTik CRS112-8P-4S-IN (Cloud Router Switch) is an eight Gigabit RJ45 port PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE, and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps.

MikroTik CRS328-24P-4S+RM (Cloud Router Switch) is a SwOS/RouterOS powered 24 port Gigabit PoE Ethernet switch with four additional SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS.