The cAP XL ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz 802.11b/g/n and 5 GHz in a/n/ac standards, and will provide coverage in 360 degrees around it.
Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. Device supports IPsec hardware acceleration too.
The cAP XL ac is a feature packed device with a sleek enclosure, that can become inconspicuous with the push of a button - the customizable mode button in the device center will turn off all lights and sounds at it’s default configuration, but can be reconfigured to launch any RouterOS script. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.
The device comes bundled with two enclosures, so you can choose the design you like best.
Technical Data:
Manufacturer / Model: |
Mikrotik / cAP XL ac RBcAPGi-5acD2nD-XL |
CPU: |
Quad core IPQ-4018 710 MHz |
RAM: |
128 MB |
WiFi Frequency: |
2.4 GHz: 802.11b/g/n (300 Mbps)
5 GHz: 802.11a/n/ac (867 Mbps) |
WiFi Antenna: |
6dBi, 360° Omni, integrated |
Ethernet Interface: |
2 x 10/100/1000 Ethernet (RJ45, Auto-MDI/X, PoE-IN, PoE-Out) |
PoE-In: |
17 - 57V |
PoE-Out: |
up to 57V |
Software: |
RouterOS, Level 4 |
Appliance: |
Indoor |
Scope of delivery:
1 x MikroTik RouterBoard cAP XL ac |
1 x 100-240V Input, Output 24V 1.2A Power adapter |
1 x Giabit PoE Injector |
1 x Mounting Equipment |