Ubiquiti Accessories

No more cable clutter! With this passive PoE injector, you can power your network devices (e.g., IP cameras, access points, or WiFi routers) via the Ethernet cable. The injector combines the data signal (LAN) and power (from your adapter). This saves you from needing a power outlet at the installation site. Suitable for all passive PoE devices in the Fast Ethernet range (10/100 Mbps) and voltages from 12V to 48V.HighlightsPower over LAN: Uses unused wires of the network cable to transmit ...

Power your devices in hard-to-reach places without throttling your internet speed! This passive Gigabit PoE injector is the high-speed solution for modern networks. It transmits data at up to 1000 Mbps while simultaneously feeding power to your device through the LAN cable. Ideal for high-performance WiFi Access Points, Starlink modifications, or high-resolution 4K cameras.HighlightsGigabit Speed: Full 10/100/1000 Mbps support. No bandwidth bottleneck like cheap Fast Ethernet adapters. Pa...

Why buy expensive PoE switches when you can simply upgrade your existing equipment? This 4-Port Gigabit PoE Injector is a so-called "Midspan" adapter. It connects between your regular switch and up to 4 end devices. It reliably powers IP cameras, VoIP phones, or WiFi Access Points with electricity and Gigabit data. Thanks to the centralized design, you only need a single power adapter for four devices – saving space and outlets.Highlights4x Power: Powers up to 4 devices simultaneously via...

Router stopped working or lost the power supply for your external hard drive? This universal 12V power adapter is the perfect replacement for a wide range of small electronics. Equipped with the common 5.5 x 2.1 mm barrel connector and solid 1 Ampere output, it gets your devices running again. Thanks to the extra-long cable (1.80 meters), you have full flexibility in placement.HighlightsUniversal Talent: Fits routers, LED strips, USB hubs, scanners, cameras, and many other devices requiri...

Does your device require a specific voltage of 18 Volts? This universal power adapter delivers exactly 18V and 1 Ampere of current. It is ideal as a replacement power supply for specific audio components (e.g., effects pedals), charging docks for cordless handheld vacuums, or specialized network accessories. Equipped with the widely used 5.5 x 2.1 mm barrel connector, it fits many jacks mechanically – please verify your device's voltage requirement beforehand!HighlightsSpecial Voltage 18V...

Does your device require 24 Volts? This universal power adapter delivers stable 24V and 1 Ampere (24 Watts). It is the ideal replacement for broken power supplies of PoE injectors (e.g., MikroTik), LED controllers, 3D printer accessories, or humidifiers. Equipped with the common 5.5 x 2.1 mm barrel connector and wide-range input, it is versatile and usable worldwide.HighlightsHigh-Voltage 24V: Specifically for devices with 24 Volt operating voltage (please do not connect to 12V devices!)....

Keep your controller cool. The Ubiquiti UACC-CKG2-PLUS-STAND is the official vertical mount for the UniFi Cloud Key Gen2 Plus. While the device often gets quite warm when lying flat, positioning it upright in this stand ensures significantly improved heat dissipation through natural convection. This extends the lifespan of the internal hard drive and electronics. The stand matches the aluminum design of the Cloud Key perfectly, offers a non-slip grip thanks to its rubberized base, and keeps y...

Wireless links, perfectly aligned. The Ubiquiti Quick-Mount is a flexible mounting adapter for your Ubiquiti CPE devices. Standard NanoStations often only allow rigid mounting to poles. With the Quick-Mount, you add full freedom of movement: Tilt and swivel the device precisely to get the best possible signal. The mount is tool-free adjustable and universally applicable – whether on a pole or directly on a wall. It is compatible with the NanoStation 5AC, NanoStation loco 5AC, and the NanoBeam...

Internet without a drill. The Ubiquiti NS-WM (Window Mount) is the ideal mounting solution for anyone who cannot or may not mount their NanoStation on the outer wall. Whether in a rented apartment, hotel room, or temporary office – with this adapter, you simply stick your Ubiquiti NanoStation or NanoStation loco to the window pane from the inside. The industrial suction cup provides extreme grip, while the joint allows the antenna to be aligned with the transmitter. Installation takes seconds...

The classic wall mount. The Ubiquiti UB-AM (Universal Arm Mount) is a sturdy metal wall bracket designed to securely mount Ubiquiti devices like the NanoStation, NanoStation loco, or NanoBeam to exterior walls. Since these devices are primarily designed for pole mounting, the UB-AM simulates a short piece of mast on your house wall. Made of powder-coated steel, it is completely weatherproof and provides enough clearance from the wall to bypass roof overhangs or gutters. Installation is simple...

The NanoBeam behind glass. The Ubiquiti NBE-16-WM is a specialized window mount for the compact NanoBeam M5-16 and 5AC-16 wireless systems. If mounting on an exterior wall is not possible (e.g., in rental apartments or listed buildings), simply attach your NanoBeam to the window pane from the inside. The mount uses a strong industrial suction cup for a secure hold. The highlight: The NBE-16-WM completely replaces the standard pole mount. The NanoBeam clicks directly with its ball joint into t...

Use the optional Ubiquiti POE-WM wall Mount Kit to mount Ubiquiti PoE Adapter POE-24-12W and POE-24-12W-G on a wall.

The original power supply for airGateway and legacy systems. The Ubiquiti POE-15-12W is a specialized PoE injector with 15 Volts output voltage. It was primarily designed to mechanically dock with Ubiquiti airGateway modules, enabling seamless WISP installations at customer sites. Additionally, it serves as a replacement power supply for older CPE devices (such as specific Bullet or NanoStation models) that specifically require 15V. Like all Ubiquiti PoE adapters, it features integrated groun...

The standard for 24V Passive PoE. The Ubiquiti POE-24-12W is the classic PoE injector for a wide range of Ubiquiti devices. It delivers reliable 24 Volts (0.5 Amps) and is ideal as a replacement power supply for the airMAX M-series (NanoStation, Loco, Bullet) as well as older 24V UniFi Access Points and cameras. Like all original Ubiquiti adapters, it offers a crucial advantage over cheap third-party power supplies: Integrated grounding protection. In combination with shielded cables, it safe...

Full speed ahead. The Ubiquiti POE-24-12W-G is the Gigabit version of the standard power supply. It was specifically developed for high-performance airMAX AC devices and UniFi Access Points that deliver more than 100 Mbps data throughput. While standard injectors become a bottleneck, this model supports Gigabit LAN (10/100/1000 Mbps). It delivers 24V (12 Watts) Passive PoE and features indispensable grounding protection to safe-guard your outdoor devices from ESD damage and voltage spikes. If...

Double the power for pro hardware. The Ubiquiti POE-24-24W is a high-performance PoE injector designed specifically for devices with higher power requirements. Delivering 24 Volts and a solid 1.0 Ampere, it provides 24 Watts of power – double that of standard adapters. It is the ideal replacement power supply for the Ubiquiti Rocket M-series, large PowerBeam antennas, or installations with particularly long cable runs where voltage drop is a concern. Naturally, this model also features integr...

No compromises: Maximum power at maximum speed. The Ubiquiti POE-24-24W-G is the most powerful 24V power supply in the Ubiquiti lineup. With 24 Watts (1.0 Ampere), it offers twice the current of standard injectors while supporting Gigabit Ethernet (1000 Mbps). This adapter is mandatory for high-end components like the Rocket 5AC Prism, airFiber X antennas, or PowerBeam AC Gen2 series, which require significant energy under full load. Additionally, it compensates for voltage drops over long ca...

Maximum 24V power for Next-Gen wireless. The Ubiquiti POE-24-30W-G-WH is the most powerful 24V PoE injector in the portfolio. With 30 Watts of power (1.25 Amps), it offers even more headroom than the 24W model, making it the top choice for modern high-tech systems like the airFiber 60 (AF60), GigaBeam series, or UISP Wave devices. It supports Gigabit Ethernet for full data throughput and comes in a modern white design. Thanks to the high current of 1.25A, it is also excellent for compensating...

48 Volt power for specialized hardware. The Ubiquiti POE-48-24W is a PoE injector with 48 Volts output voltage and 24 Watts power (0.5 Amps). It is the suitable replacement power supply for legacy UniFi Enterprise Access Points (e.g., UAP-Pro), Ubiquiti Outdoor units, or EdgeRouter models requiring 48V Passive PoE. Due to the higher voltage, this adapter is particularly suitable for long cable runs, as the voltage drop is lower compared to 24V systems. Naturally, this model also protects your...

The power source for your Gigabit WiFi. The Ubiquiti POE-48-24W-G is a 48V Gigabit PoE injector specifically designed for modern high-performance network devices. It is the ideal replacement power supply for the UniFi AC and U6 series (e.g., UAP-AC-PRO, U6-Lite) as well as Ubiquiti airFiber X components. Unlike standard adapters, this model supports full 1000 Mbps data rates, ensuring your network speed is not throttled. With 24 Watts of power (48V @ 0.5A), it reliably supplies even demanding...

Massive power for airFiber Backhauls. The Ubiquiti POE-50-60W is an industrial-grade Gigabit PoE injector designed for the most demanding point-to-point systems. With 50 Volts and 60 Watts (1.2 Amps), it powers large airFiber units (AF-5, AF-24, AF-24HD) that require too much energy for standard PoE. To transmit this high power safely and efficiently, the adapter uses "4-Pair Powering" technology, where current flows through all 8 wires of the network cable. This minimizes resistance and heat...

Clean power for your UniFi system. The Ubiquiti U-POE-af is a compact Gigabit PoE injector designed to power 802.3af compatible devices. It is the ideal partner for modern Access Points like the U6-Lite, U6+, or NanoHD, as well as many UniFi Protect cameras (G3/G4/G5). With its clean 48V voltage and Gigabit data transmission, it turns any standard switch port into a PoE port. The sleek white design blends unobtrusively into living spaces. Thanks to the included wall mounting bracket, the adap...

More power for Pro WiFi. The Ubiquiti U-POE-at is a premium PoE injector that supports the higher-performance 802.3at standard (PoE+). With up to 30 Watts of output power, it is mandatory for high-end Access Points like the UniFi U6-Pro, U6-LR, or the new U7-Pro, which require more energy than standard models. It delivers clean 48 Volts and supports Gigabit speeds to ensure WiFi 6 and WiFi 7 are not bottlenecked. Thanks to its compact white housing and included wall mount, it can be installed...

Maximum energy for Enterprise Hardware. The Ubiquiti U-PoE++ is a high-performance injector supporting the modern 802.3bt (PoE++) standard, delivering an impressive 60 Watts of power. It is the indispensable partner for power-hungry components such as the UniFi G4 PTZ camera, the WiFi BaseStation XG, or large Connect Displays. It is especially valuable for the Ubiquiti USW-Flex Outdoor Switch: Only with this 60W injector can the switch unlock its full PoE budget of 46 Watts to pass on to conn...

The ultimate fuse for your tower. The Ubiquiti FiberPoE Gen2 (F-POE-G2) is a cost-effective solution for connecting outdoor devices via fiber optics. It overcomes the 100-meter limit of traditional copper cables while providing perfect protection against electrostatic discharge (ESD) and lightning damage. Since fiber does not conduct electricity, your network devices inside the building are galvanically isolated from the tower. The F-POE-G2 converts the optical signal to Ethernet and simultan...

Connects 24V devices to 48V switches. The Ubiquiti INS-3AF-I-G (Instant 802.3af Adapter) is the solution if you want to operate older 24V Passive PoE devices on modern 48V PoE switches. Instead of dealing with bulky power supplies and power strips, simply plug this compact adapter between your network cable and the end device (or switch). It safely transforms the incoming 48V 802.3af voltage down to 24V. Thanks to Gigabit support, data speeds are not throttled. Ideal for integrating airMAX an...

Intelligent power for the tower. The Ubiquiti INS-3AF-O-G (Instant 802.3af Outdoor Gigabit) transforms any modern 48V PoE switch port into a power source for 24V devices. Specially designed for outdoor use, it is weather-sealed and durable. The adapter is installed directly before the end device (e.g., a NanoStation or NanoBeam). This offers a huge physical advantage: Energy travels up the mast at an efficient 48 Volts and is converted to 24 Volts just before the destination. This prevents vo...

The rugged outdoor splitter for the mast. The Ubiquiti NanoSwitch (N-SW) is a weather-resistant 4-port Gigabit switch with PoE passthrough capability. It is designed to power multiple 24V PoE devices (such as airMAX antennas or UniFi cameras) using just a single Ethernet cable from the building. The NanoSwitch is simply powered via 24V Passive PoE (Port 1) and passes the power through to the three remaining ports. Thanks to its durable, UV-resistant housing, it withstands rain, snow, and heat...

The all-in-one outdoor upgrade. The Ubiquiti USW-Flex-Utility is a weatherproof mounting enclosure designed specifically for the UniFi Switch Flex. It transforms the switch into a standalone outdoor station. The set includes not only the rugged box but also a powerful 60W PoE adapter. This powers the USW-Flex directly on-site, allowing it to pass its full PoE budget of 46 Watts to connected cameras and Access Points. Thanks to thoughtful cable management and seals, all cables disappear neatly...

Low-cost insurance for your network. The Ubiquiti ETH-SP-G2 is an affordable yet effective surge protector for all outdoor networking devices. Whether airFiber, airMAX, or UniFi cameras – this small device protects your expensive hardware from electrostatic discharge (ESD) and voltage spikes caused by thunderstorms. The ETH-SP-G2 supports Gigabit Ethernet and PoE (Power over Ethernet), ensuring it doesn't slow down your connection speed. It is weatherproof and easy to mount on poles or walls....