60 Watt Power for Your Most Demanding Devices
When standard PoE reaches its limits, the Ubiquiti POE-50-60W comes into play. With a massive output power of 60 Watts, this PoE Injector is the professional solution for devices with high energy requirements. Whether you want to operate a powerful UniFi G4 PTZ Camera for your UniFi Protect System, an airFiber radio link, or other airMAX ac Components – this adapter delivers the necessary power stably and reliably over a single Ethernet Cable. The 4-pair powering utilizes all wires of the cable to efficiently transmit the high power.
Reliable Protection for Your Network Equipment
Investments in high-quality Network technology must be protected. The POE-50-60W features robust protection mechanisms that go far beyond the usual. Sophisticated overvoltage protection in differential and common mode, clamping voltage protection for data (11V) and power lines (60V), and effective ESD protection (electrostatic discharge) safeguard your connected devices from damage due to electrical disturbances. Especially in outdoor installations, this is an indispensable feature that significantly increases the lifespan of your equipment, offering excellent Lightning Protection.
Passive PoE: What You Need to Know
This PoE Injector uses passive Power over Ethernet. This means it constantly supplies a voltage of 50V as soon as it is connected. This is perfect for Ubiquiti devices specifically designed for this type of Power Supply. However, it is important to know that, unlike active PoE standards (IEEE 802.3af/at/bt), no negotiation takes place between the injector and the end device. Therefore, always check the compatibility of your device before connecting to avoid damage. For compatible systems, this is the most efficient and direct method of Power Supply.
Gigabit Performance Without Compromise
High Power Supply should never compromise the data rate. The POE-50-60W is designed as a full-fledged Gigabit adapter and supports speeds of 10, 100, and 1000 Mbps. This ensures that you can utilize the full bandwidth of your Network without the injector becoming a bottleneck. The shielded RJ45 ports also ensure interference-free data transmission. It belongs to the category of indispensable PoE Injectors / Power Supplies for any professional Network setup.
Strengths & Notes at a Glance
- Pro: Enormous power output of 60 Watts for power-hungry devices.
- Pro: Comprehensive protection functions against overvoltage, current surges, and ESD.
- Pro: Full Gigabit data rate without performance loss.
- Pro: High reliability and certified safety (UL, CE, FCC).
- Note: Uses passive PoE – only use with compatible 50V devices to avoid damage.
- Note: Does not have status LEDs for LAN activity indication.
Specifications & Features
| Manufacturer: | Ubiquiti |
| Model: | POE-50-60W |
| EAN: | 0810354023118 |
| Device Type: | PoE Injector (Power Supply) |
| Output Power (Total): | 60 W |
| Output Voltage: | 50 V DC |
| Output Current: | 1.2 A |
| PoE Standard: | Passive PoE |
| Power Supply via Pairs: | 4-Pair Powering (Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-)) |
| Input Voltage: | 90-260 V AC |
| Rated Input Voltage: | 100-240V AC @ 50/60 Hz |
| Input Current: | 1.3 A @ 120V AC / 0.75 A @ 230V AC |
| Inrush Current: | <100A Peak @ 120V AC / <200A Peak @ 230V AC |
| Efficiency: | >85% |
| Output Ripple: | 1% maximum |
| Switching Frequency: | 65 kHz |
| Line Regulation: | ≤ 3% |
| Load Regulation: | ≤ 5% |
| Data Rate: | 10/100/1000 Mbps (Gigabit Ethernet) |
| Ports: | 1x RJ45 LAN (Data In), 1x RJ45 PoE (Power + Data Out), 1x IEC-320 C6 Power Input |
| Overvoltage Protection: | Differential and Common Mode |
| ESD Protection: | Yes, against electrostatic discharge |
| Clamping Voltage Protection: | 11V (Data), 60V (Power) |
| Maximum Surge Discharge Current: | 1500A (8/20 µs) for Power |
| Peak Pulse Current: | 36A (10/1000 µs) for Data |
| Shunt Capacitance: | <5 pF for Data |
| Response Time (Protection): | <1 ns |
| Reset Function: | No |
| LAN Activity Indicator: | No |
| Mounting: | Wall-mountable |
| Dimensions (H x W x D): | 101 x 60 x 33 mm |
| Weight: | 192 g |
| Operating Temperature: | 0°C to 40°C |
| Storage Temperature: | -30°C to 70°C |
| Operating Humidity: | 35% to 90% non-condensing |
| Certificates: | CE, FCC, IC, UL |
| Compliance: | RoHS, NDAA Compliant |
Scope of Delivery
| 1 x Ubiquiti PoE Injector (POE-50-60W) |
| 1 x AC Power Cord with Grounding Plug |
Frequently Asked Questions (FAQ)
Is the Ubiquiti POE-50-60W compatible with every PoE device?
No. This is a passive 50V PoE injector. It should only be used with devices explicitly designed to receive 50V passive PoE. Connecting it to devices that only expect standard PoE (e.g., 48V according to 802.3af/at) can damage them. For a robust Network, always ensure compatibility with your PoE Injectors / Power Supplies.
Can I power a Ubiquiti UniFi G4 PTZ Camera with the POE-50-60W?
Yes, the POE-50-60W from Ubiquiti Networks is explicitly listed as compatible with devices like the UniFi G4 PTZ Camera, which is part of UniFi Protect, and requires high PoE++ power of up to 60W. This makes it an ideal PoE Injectors / Power Supplies solution for your IP Cameras.
What does "4-pair powering" mean?
This means that the PoE injector uses all four wire pairs (eight wires) in the Ethernet Cable for power transmission. This is necessary to achieve the high power of 60 watts, as 2-pair powering is not sufficient for this. Proper Cabling and quality Ethernet Cables are essential for optimal Network performance.
Why doesn't the injector have a reset button?
The PoE injector is purely a power supply device without its own logic. A reset of the connected device must be performed by briefly disconnecting the power supply, i.e., by unplugging the injector. This design simplifies the PoE Injectors / Power Supplies unit.
Is a power cable included?
Yes, the PoE injector typically comes with a suitable AC power cable with a protective earth contact, which is crucial for the integrated ESD protection. This is a standard part of the Accessories and Cabling provided with these PoE Injectors / Power Supplies.
What is the difference between the POE-50-60W and the U-PoE++?
The POE-50-60W is a classic 50V passive injector, originally developed by Ubiquiti Networks for carrier products like airFiber. The newer U-PoE++ delivers 48V and is more aligned with the IEEE 802.3bt standard, although both offer 60W of power. Both are excellent PoE Injectors / Power Supplies for your Network.
Street name: Third Avenue 685
Postal code, City: 10017 , New York
Country: Vereinigte Staaten
State: New York
Homepage: https://www.ui.com
