Reliable Power for your Network: The 24V PoE Injector
Are you looking for a stable and secure Power Supply for your Ubiquiti components? The Ubiquiti POE-24-24W-G is the answer. This passive PoE Injector was developed to supply devices like UniFi Access Points or IP Cameras with power and data via a single Ethernet Cable. No more cable clutter and separate power supplies at the mounting location. With this adapter, you seamlessly integrate the Power Supply into your existing Network and benefit from a clean and professional installation. It is an essential component in the category PoE Injectors / Power Supplies.
Gigabit Performance Meets Robust Protection
Why compromise? The POE-24-24W-G supports full Gigabit speed, so your data flows at up to 1000 Mbps – without a bottleneck. At the same time, a sophisticated protection system watches over your investment. The multi-stage protection against overvoltage, power surges, and electrostatic discharge (ESD) minimizes the risk of damage, especially in installations prone to interference. For optimal protection, Ubiquiti recommends using shielded Cabling, which you can also find in our Cabling category.
The Clever Detail: Remote Reset Capability
Every administrator knows the problem: a device in a hard-to-reach location has frozen and needs to be restarted. The POE-24-24W-G solves this elegantly. Via a small, inconspicuous button on the housing, you can trigger the Remote Reset function. This sends a signal to the connected Ubiquiti device, initiating a restart. This saves you the tedious trip to the mounting location and valuable time troubleshooting.
Important Note on Compatibility with Passive PoE
This PoE Injectors / Power Supplies uses passive 24V PoE. This means it permanently delivers a voltage of 24 volts without 'negotiating' with the end device. This is perfect for a variety of Ubiquiti products, but potentially harmful to devices that expect an active PoE standard like 802.3af/at (typically 48V). Please ensure before connecting that your end device is explicitly designed for passive 24V PoE. This will help you avoid damage and ensure smooth operation of your Network infrastructure.
Strengths & Notes at a Glance
- Pro: Robust device protection against overvoltage and ESD/EMP protection.
- Pro: Uncompromising Gigabit speed for full data rates.
- Pro: Time-saving Remote Reset function for connected Ubiquiti devices.
- Pro: High reliability and compatibility with many Ubiquiti series.
- Note: Delivers exclusively passive 24V PoE and is not compatible with 802.3af/at devices.
- Note: Does not perform intelligent negotiation of power requirements with the end device.
Specifications & Features
| Manufacturer: | Ubiquiti |
| Model Name: | POE-24-24W-G |
| EAN: | 0810354023538 |
| Device Category: | PoE Injector (Power Supply) |
| PoE Standard: | Passive PoE, 2-Pair Powering |
| PoE Pinout: | Pins 4, 5 (+) and Pins 7, 8 (-) |
| Output Voltage: | 24V DC @ 1.0A |
| Output Power: | 24 Watts |
| Load Regulation: | ≤ 5% |
| Line Regulation: | ≤ 3% |
| Output Ripple: | 1% Max. |
| Input Voltage (Nominal): | AC 100-240V |
| Input Voltage (Range): | AC 90-260V |
| Input Frequency: | 50/60 Hz |
| Input Current: | 0.6A @ 120VAC, 0.4A @ 240VAC |
| Inrush Current: | <60A Peak @ 120VAC, <120A Peak @ 230VAC |
| Efficiency: | > 80% |
| Switching Frequency: | 65 kHz |
| Data IN Port: | 1 x RJ45, shielded |
| PoE OUT Port: | 1 x RJ45, shielded (Data + Power) |
| Network Standard: | Gigabit Ethernet (10/100/1000 Mbps) |
| Power Connector: | IEC-320 C6 (Mickey Mouse Connector) |
| Surge Protection: | Differential and Common Mode |
| Clamping Protection: | 11V (Data), 60V (Power) |
| Max. Surge Discharge: | 1500A (8/20 μs) Power |
| Peak Pulse Current: | 36A (10/1000 μs) Data |
| ESD/EMP Protection: | Yes (requires grounded cable) |
| Response Time (Protection): | < 1 ns |
| Dimensions (H x W x D): | 33 x 57 x 88 mm |
| Weight: | 158.5 g |
| Operating Temperature: | 0°C to 40°C |
| Storage Temperature: | -30°C to 70°C |
| Humidity (Operating): | 35% to 95% (non-condensing) |
| LED Indicator: | Yes, Power LED |
| Remote Reset: | Yes, via Reset button on the device |
| Certifications: | CE, FCC, IC, UL |
Scope of Delivery
| 1 x Ubiquiti POE-24-24W-G PoE Injector |
Frequently Asked Questions (FAQ)
Is the Ubiquiti POE-24-24W-G an active or passive PoE Injector?
It is a passive PoE Injector. It applies a constant 24V voltage to wire pairs 4/5 (+) and 7/8 (-) without performing any negotiation with the end device on your Network.
Can I use this PoE Injector for an IP Camera that requires 802.3af?
No, this is not recommended and can damage the IP Camera. The POE-24-24W-G provides passive 24V, whereas the 802.3af standard requires a voltage of approximately 48V and active negotiation. You must use a PoE Injector that explicitly supports your device's standard for your IP Cameras or Other Cameras.
What does "Remote Reset Capability" mean?
This feature allows you to restart a connected Ubiquiti Networks device without having to do it directly on the device. By pressing the small reset button on the PoE Injector, a signal is sent over the Ethernet Cable, triggering the restart of the end device. This is a useful Ubiquiti Accessories feature.
Do I need a special Network Cable for this PoE Injector?
For full ESD protection, Ubiquiti Networks recommends using shielded twisted-pair Cabling (STP) with grounded connectors, such as their own "TOUGHCable" products (UISP / UniFi Cable). While a standard UTP Ethernet Cable will work, it does not offer optimal protection for your Network setup.
Does the POE-24-24W-G support Gigabit Internet?
Yes, absolutely. Both RJ45 ports (LAN and PoE) are Gigabit-capable (10/100/1000 Mbps), ensuring full Network speed is passed to the connected device via this PoE Injector.
Does an LED light up on the PoE Injector to indicate operation?
Yes, the device has a power LED that indicates it is powered and ready for operation. However, it does not have a separate LED to indicate LAN activity for your Network connection.
Street name: Third Avenue 685
Postal code, City: 10017 , New York
Country: Vereinigte Staaten
State: New York
Homepage: https://www.ui.com
