Unleash the full power of your Network with 2.5G PoE+
Your Network can do more – but is it being slowed down by an old Gigabit connection? The Ubiquiti UACC-PoE+-2.5G is the solution. This Multi Gigabit PoE Injector was specially developed to bridge the gap between your existing Network and modern high-performance devices. Forget data congestion and provide your latest UniFi Access Points or IP Cameras with the speed and energy they deserve. Installation is child's play: simply connect it between your Ethernet Switch and the end device and immediately benefit from up to 2.5 Gbit/s.
Retrofit PoE+ Power Supply: Smart, Simple & Affordable
You don't have to overhaul your entire Network to upgrade individual devices. Instead of investing in an expensive new Ethernet Switch, you can upgrade specifically and cost-effectively with this PoE+ Adapter. It is the perfect choice to power a single device with 30 Watt PoE+ Power without changing the existing infrastructure. This makes it an indispensable tool for any Network admin who needs to plan flexibly and budget-consciously.
Robust Protection for Your Valuable Hardware
A power outage or voltage spike can destroy expensive hardware in seconds. Ubiquiti has equipped the UACC-PoE+-2.5G with comprehensive protection mechanisms to prevent exactly that. Robust protection against overvoltage (Surge), peak pulse, and overcurrent ensures that both the PoE Injector and your connected device are safe. Rely on a stable and protected connection, around the clock.
Universal Compatibility and Plug-and-Play
Although this adapter fits perfectly into the Ubiquiti ecosystem, it is by no means limited to it. Thanks to compliance with the official IEEE 802.3at (PoE+) and 802.3af (PoE) standards, it is compatible with a variety of devices from other manufacturers. Commissioning requires no configuration. Thanks to Plug-and-Play, it is immediately ready for use and automatically adjusts the speed to the connected device – whether 2.5G, 1G, or 100 Mbps. This makes it one of the most flexible PoE Injectors / Power Supplies on the market.
Strengths & Notes at a Glance
- Pro: Future-proof Multi-Gigabit support for modern UniFi Access Points (Wi-Fi 6E/7) and other high-performance devices.
- Pro: Enables flexible and cost-effective upgrading of individual ports without replacing a complete UniFi Switch.
- Pro: Comprehensive protection mechanisms protect the PoE Injector and the connected end device from electrical damage.
- Pro: Extremely simple Plug-and-Play installation without any configuration.
- Note: Does not offer remote management functions such as monitoring or remote restart.
- Note: In rare individual cases, compatibility problems or incorrect speed throttling may occur.
Specifications & Features
| Manufacturer: | Ubiquiti, Inc. |
| Product Name: | UACC-PoE+-2.5G, 2.5G PoE+ Adapter (30W) |
| EAN: | 0810084699461 |
| UPC: | 810084699454 |
| Device Class: | PoE Injector / PoE Adapter (Midspan) |
| PoE Standard: | IEEE 802.3at (PoE+), backward compatible with IEEE 802.3af (PoE) |
| Maximum Output Power (PoE): | 30W |
| Output Voltage: | 48V DC @ 0.65A |
| Power Supply (Pins): | 2-pair supply: Pins 4, 5 (+) and 7, 8 (-) |
| Data Rate: | Up to 2.5 Gbps (2.5GBASE-T) / Multi-Gigabit |
| Supported LAN Standards: | 10/100/1000/2500 Mbps |
| Connectors: | 1x RJ45 'Data In' (shielded), 1x RJ45 'PoE Out' (shielded), 1x AC input (IEC C6 'cloverleaf') |
| Electrical Input Data: | 100—240V AC @ 50/60Hz |
| Maximum Input Current: | 0.75A |
| Inrush Current: | <150A Peak @ 230V AC |
| Efficiency: | >87% |
| Output Ripple: | 1% maximum |
| Switching Frequency: | 65 kHz maximum |
| Line Regulation: | ≤ 1% |
| Load Regulation: | ≤ 3% |
| Protection Mechanisms: | Overvoltage Protection (Surge), Peak Pulse Protection, Overcurrent Protection |
| Overvoltage Protection (Detail): | Differential and common mode |
| Clamping Voltage: | 11V (Data), 60V (Power) |
| Max. Surge Discharge (Current): | 1500A (8/20 μs) |
| Peak Pulse Current (Data): | 36A (10/1000 μs) |
| Shunt Capacitance (Data): | <5 pF |
| Response Time (Protection): | <1 ns |
| Indicators: | 1x Status LED |
| Dimensions (H x W x D): | 93 x 62 x 35 mm |
| Weight: | 156 g |
| Housing Color: | White |
| Operating Temperature: | 0°C to 40°C |
| Storage Temperature: | -30°C to 70°C |
| Operating Humidity: | 10% to 95% (non-condensing) |
| Certificates: | CE, FCC, IC, UL, UKCA, KC, CCC, RoHS |
| Compliance: | NDAA Compliant |
Scope of Delivery
| 1 x Ubiquiti UACC-PoE+-2.5G PoE Injector |
| 1 x Power Cable (with protective earth) |
| 1 x Wall Mount Accessories |
Frequently Asked Questions (FAQ)
What exactly do I need a PoE Injector like the UACC-PoE+-2.5G for?
A PoE Injector is needed if you want to operate a PoE-enabled device (such as a WiFi Access Point or an IP Camera) in a location without a power outlet, but your existing Ethernet Switch cannot supply power over the Ethernet Cables (PoE). The injector 'injects' the power into the Ethernet Cables, optimizing your Network.
Can I also use this 2.5G injector for a device that only supports 1 Gbit/s?
Yes, absolutely. The injector is backward compatible. It automatically adjusts the speed to the connected device and works seamlessly with devices that use 1 Gbit/s, 100 Mbit/s, or 10 Mbit/s, enhancing your overall Network performance.
What is the difference between PoE+ (802.3at) and standard PoE (802.3af)?
The main difference is the maximum power output. While the older PoE standard (802.3af) delivers up to 15.4 watts, the PoE+ standard (802.3at), which this device supports, can provide up to 30 watts. This is necessary for more powerful devices such as PTZ IP Cameras or modern multi-band WiFi Access Points, optimizing your Network infrastructure.
Do I need a special Ethernet Cable for 2.5 Gbit/s and PoE+?
For stable transmission of 2.5 Gbit/s and PoE+ power, at least a Cat 5e Ethernet Cable is recommended. However, for optimal performance and to minimize interference, especially over longer distances, a Cat 6 or Cat 6a Ethernet Cable is the better choice for your Cabling needs.
Is the UACC-PoE+-2.5G compatible with devices from other manufacturers?
Yes. As long as the end device complies with the PoE standard IEEE 802.3at (PoE+) or 802.3af (PoE), the injector can be used independently of the manufacturer. It is not limited to Ubiquiti Networks products, making it a versatile PoE Injectors / Power Supplies solution for your Network.
Why does the injector not have a LAN activity LED?
This model foregoes blinking LEDs to indicate Network activity, in order to maintain a minimalist design. A single status LED indicates whether the device is powered and PoE is active, simplifying your Network monitoring.
Street name: Third Avenue 685
Postal code, City: 10017 , New York
Country: Vereinigte Staaten
State: New York
Homepage: https://www.ui.com
