5G Antennas / Outdoor / Indoor

QuOmni AO5G2U 5G / 4G omnidirectional MIMO 2x2 is ultra wideband LTE and 5G outdoor antenna. It is primary designed for 5G/4G/3G/2G devices which require high efficiency connections. The antenna covers many 4G bands including the new extended 4G Band 71 with frequency range from 617 to 3800MHz. The mounting bracket allows the antenna to be installed on the buildings (on the pole or on the wall) as the client antenna or on the moving points like trains, buses, lorries, yachts, boats to receive Internet by LTE/5G/3G/2G. It's ideal solution to use with all industrial and domestic 2x2 4G and 5G modems and routers like: Teltonika, DIGI, Mikrotik, Robustel, Cisco, etc. The antennas has 2 x 5m antenna cable with SMA male connector.

PROSCAN POLE2 - 2x2 MIMO Multiband 4G / 5G Antenna with up to 6.6dBi gain. The POLE2 is an extremely broadband omnidirectional antenna covering the frequency range of 600 - 8000 MHz. This makes it suitable for all 4G and 5G frequency bands.

The antenna's housing is made of robust fiberglass. The antenna is completely weatherproof, making it ideal for outdoor use. Due to its omnidirectional characteristics, specific alignment of the antenna is not necessary.

With this antenna, you can significantly enhance your 4G or 5G connection, signal quality, and speed. Appropriate mounting accessories are included. The antenna is delivered without an antenna cable. Suitable antenna cables can be found under accessories.

PROSCAN POLE2-4: 4x4 MIMO Multiband LTE / 4G and 5G Antenna with up to 6.6dBi gain. The POLE2 is an extremely broadband omnidirectional antenna covering the frequency range of 600 - 8000 MHz. This makes it suitable for all LTE / 4G and 5G frequency bands.

The antenna's housing is made of robust fiberglass. The antenna is completely weatherproof, making it ideal for outdoor use. Due to its omnidirectional characteristics, specific alignment of the antenna is not necessary.

With this antenna, you can significantly enhance your LTE / 4G or 5G connection, signal quality, and speed. Appropriate mounting accessories are included. The antenna is delivered without an antenna cable. Suitable antenna cables can be found under accessories.

The BATLINK MAO5GV1 is an 4G and 5G antenna (2x2 MIMO) with omnidirectional characteristics, a white housing, and a performance gain of up to 9dBi. The BATLINK antenna covers the frequency range from 698 MHz to 5800 MHz, making it fully compatible with common LTE and 5G frequencies. Thanks to the high-quality materials used (V4A stainless steel and ABS plastic), the BATLINK MAO5GV1 is suitable for maritime use on boats or yachts (Marine Grade) as well as an 4G / 5G outdoor antenna, and can withstand even extreme weather conditions (IP66) and aggressive seawater.

The performance gain of up to 9dBi reliably increases the range, signal strength, and data transmission rate of your connection. Additionally, the antenna is compact and features a shock-resistant housing.

The BATLINK MAO5GV1 consists of two individual antennas mounted on the supplied 2x2 MIMO V4A stainless steel bracket. The delivery includes robust V4A pipe clamps, allowing the antennas to be mounted separately if needed.

A suitable TWIN antenna cable with SMA connectors (compatible with almost all LTE and 5G routers) can be optionally ordered.

The BATLINK MAO5GV2 is a multiband LTE / 4G / 5G antenna (2x2 MIMO) with omnidirectional characteristics, a black housing, and a performance gain of up to 9 dBi. The antenna covers the frequency range from 698 MHz to 5800 MHz, making it fully compatible with common LTE / 4G and 5G frequencies. Thanks to the high-quality materials used (V4A stainless steel and ABS plastic), the BATLINK MAO5GV2 is also suitable for maritime use (Marine Grade) as well as an LTE / 4G / 5G outdoor antenna, and it withstands extreme weather conditions (IP66) and aggressive seawater.The performance gain of up to 9 dBi reliably increases the range, signal strength, and data transmission rate of your connection. Additionally, the antenna is compact and features a shock-resistant housing. The BATLINK MAO5GV2 consists of two individual antennas mounted on the included 2x2 MIMO V4A stainless steel bracket. The delivery includes robust V4A pipe clamps, allowing the antennas to be mounted individually if needed. Optionally, the ZH4A1 mounting system (not included) can be used to ensure full compatibility with TravelConnector mounting systems, which offer a variety of mounting options for different scenarios. A matching TWIN antenna cable with SMA connectors (compatible with almost all LTE and 5G routers) can be optionally ordered.

The BATLINK MAO5GV1-4 is a multiband 4x4 MIMO 4G / 5G antenna with omnidirectional characteristics, a white casing, and a performance gain of up to 9dBi. The antenna covers the frequency range from 698 MHz to 5800 MHz and is therefore fully compatible with common 4G and 5G frequencies. Due to the high-quality materials used (V4A and ABS plastic), the BATLINK MAO5GV1 antenna is also suitable for maritime use (marine grade) as well as for use as an outdoor 4G / 5G antenna and withstands even extreme weather conditions (IP66) and aggressive seawater.

With a performance gain of up to 9dBi, the 4x4 MIMO 4G / 5G antenna reliably increases the range, signal strength, and data transmission rate of your connection. The omnidirectional antenna is compact and has a shock-resistant casing. The BATLINK MAO5GV1-4 consists of four individual antennas mounted on the included 4x4 MIMO V4A stainless steel mast mount. The delivery also includes robust V4A pipe clamps, so the antennas can be mounted individually if needed.

Optionally, you can order a matching antenna cable (N-plug to SMA plug). This is compatible with almost all 4G and 5G routers. Suitable adapters, window feed-throughs, and antenna mounts can be found under accessories.

The BATLINK MAO5GV2-4 is a multiband 4x4 MIMO 4G / 5G antenna with omnidirectional characteristics, a white casing, and a performance gain of up to 9dBi. The antenna covers the frequency range from 698 MHz to 5800 MHz and is therefore fully compatible with common 4G and 5G frequencies. Due to the high-quality materials used (V4A and ABS plastic), the BATLINK MAO5GV1 antenna is also suitable for maritime use (marine grade) as well as for use as an outdoor 4G / 5G antenna and withstands even extreme weather conditions (IP66) and aggressive seawater.

With a performance gain of up to 9dBi, the 4x4 MIMO 4G / 5G antenna reliably increases the range, signal strength, and data transmission rate of your connection. The omnidirectional antenna is compact and has a shock-resistant casing. The BATLINK MAO5GV2-4 consists of four individual antennas mounted on the included 4x4 MIMO V4A stainless steel mast mount. The delivery also includes robust V4A pipe clamps, so the antennas can be mounted individually if needed.

Optionally, you can order a matching antenna cable (N-plug to SMA plug). This is compatible with almost all 4G and 5G routers. Suitable adapters, window feed-throughs, and antenna mounts can be found under accessories.

The Poynting PANL-401 is a high-performance 5G, 4G and GNSS omnidirectional antenna in a panel design. With a signal gain of up to 7.8dBi in 4x4 MIMO operation, it ensures a stable connection even in remote areas. The PANL-401 operates in the frequency range of 410 - 6000MHz, allowing it to receive and process all common mobile network frequencies in Europe.

The PANL-401 features an IP65-certified antenna housing, making it suitable for outdoor use. However, it is primarily designed for use in driver cabins of trucks, motorhomes, or buses. It can be easily mounted without drilling using the included suction cup or hook-and-loop fasteners.

The PANL-401 connects to your router, modem, or gateway via five 2-meter-long coaxial antenna cables with SMA connectors.

The XPOL-1-5G (A-XPOL-0001-V2-21) belongs to the second generation "V2" of the very popular cross-polarized XPOL-1-5G series from Poynting. The XPOL-1-5G (A-XPOL-0001-V2-21) is a 2x2 MIMO 4G / 5G antenna. In addition to the classic frequency bands for GSM, UMTS, and 4G, the XPOL-1-5G also supports the newer 3400 - 3800 MHz 5G frequency bands. Thus, this powerful antenna can be universally used for 2G, 3G (UMTS), 4G (LTE), and 5G applications.

The XPOL-1-5G antenna features a weather and dust-resistant antenna housing according to IP65 standards. The robust construction and high-quality material ensure that the 4G / 5G omnidirectional antenna from Poynting can be used long-term outdoors without any problems.

The connection of the XPOL-1-5G antenna to your 4G or 5G router is made via the four 5m long antenna cables with SMA connectors. As a rule, you can simply screw this antenna directly onto the antenna ports of your router. Due to its omnidirectional characteristics, this antenna does not need to be specifically aligned with the transmission mast.

The included mounting accessories allow the antenna to be mounted classically on a mast. However, suction cups are also included in the delivery. Thus, the XPOL-1-5G can also be used as a 4G / 5G window antenna. Suitable wall mounts, etc., can be found under accessories.

The XPOL-1-5G (A-XPOL-0001-V2-41) belongs to the second generation "V2" of the very popular cross-polarized XPOL-1-5G series from Poynting. The XPOL-1-5G (A-XPOL-0001-V2-41) is a 4x4 MIMO 4G / 5G antenna. In addition to the classic frequency bands for GSM, UMTS, and 4G, the XPOL-1-5G also supports the newer 3400 - 3800 MHz 5G frequency bands. Thus, this powerful antenna can be universally used for 2G, 3G (UMTS), 4G (LTE), and 5G applications.

The XPOL-1-5G antenna features a weather and dust-resistant antenna housing according to IP65 standards. The robust construction and high-quality material ensure that the 4G / 5G omnidirectional antenna from Poynting can be used long-term outdoors without any problems.

The connection of the XPOL-1-5G antenna to your 4G or 5G router is made via the four 5m long antenna cables with SMA connectors. As a rule, you can simply screw this antenna directly onto the antenna ports of your router. Due to its omnidirectional characteristics, this antenna does not need to be specifically aligned with the transmission mast.

The included mounting accessories allow the antenna to be mounted classically on a mast. However, suction cups are also included in the delivery. Thus, the XPOL-1-5G can also be used as a 4G / 5G window antenna. Suitable wall mounts, etc., can be found under accessories..

The XPOL-2-5G (A-XPOL-0002-V3-01) from Poynting is an extremely robust and powerful 2x2 MIMO 4G / 5G directional antenna. The antenna delivers a gain of up to 11dBi and is therefore capable of significantly enhancing your 4G or 5G connection. The XPOL-2-5G antenna supports the frequency range from 617 to 4200 MHz, making it extremely broadband. This powerful antenna can therefore be universally used for 2G, 3G (UMTS), 4G (LTE), and 5G.

The Poynting XPOL-2-5G 4G / 5G directional antenna features a weather- and dust-resistant antenna housing in accordance with the IP65 standard. The construction of the XPOL-2-5G is extremely robust. The antenna is therefore very durable and can be easily used as a 4G / 5G outdoor antenna.

The antenna is connected to your 4G or 5G router via the two 5m long antenna cables. These are equipped with SMA connectors and can therefore usually be directly connected to the SMA antenna port of your router.

The antenna is designed for mast mounting. Corresponding mounts as well as window feeds or extension cables can be found under Accessories.

The XPOL-24 (A-XPOL-24-V1-01) from Poynting is an extremely robust and powerful 4x4 MIMO 4G / 5G directional antenna. The antenna delivers a gain of up to 11dBi and is therefore capable of significantly enhancing your 4G or 5G connection. The XPOL-24 antenna supports the frequency range from 617 to 4200 MHz, making it extremely broadband. This powerful antenna can therefore be universally used for 2G, 3G (UMTS), 4G (LTE), and 5G.

The Poynting XPOL-24 4G / 5G directional antenna features a weather- and dust-resistant antenna housing in accordance with the IP65 standard. The construction of the XPOL-24 is extremely robust. The antenna is therefore very durable and can be easily used as a 4G / 5G outdoor antenna.

The antenna is connected to your 4G or 5G router via the four 5m long antenna cables. These are equipped with SMA connectors and can therefore usually be directly connected to the SMA antenna port of your router.

The antenna is designed for mast mounting. Corresponding mounts as well as window feeds or extension cables can be found under Accessories.

The Poynting LPDA-500 is a high-performance, wideband directional antenna specifically designed for use in modern wireless communication systems. It covers an exceptionally broad frequency range from 617 MHz to 7200 MHz, making it ideal for 5G, 4G/LTE, 3G, 2G, Wi-Fi/WiFi 6, LoRa, Helium (IoT), and other applications. Thanks to its log-periodic dipole array (LPDA) design, it delivers a stable directional radiation pattern and a high gain of up to 11 dBi across the entire band, significantly improving signal strength and connection reliability, even in remote or challenging environments.

The antenna is perfectly suited for a wide variety of applications—whether in industrial settings, rural residential use, or the professional IoT sector. It is particularly effective for installations where cellular or Wi-Fi signals need to be precisely focused and enhanced, such as for mobile broadband routers, LTE/5G modems, signal boosters, or mesh systems. Due to its directional design, it also provides substantial range improvements in LoRaWAN and Helium networks, making it ideal for gateways or nodes that rely on stable, long-range connectivity.

With its rugged construction, the A-LPDA-0500-V1-01 meets the highest standards for durability and weather resistance. It is rated IP65 for protection against dust and water ingress and can operate in extreme temperatures ranging from –40 °C to +80 °C. The included mast mounting bracket allows for easy installation on poles or walls and can be adjusted in angle for precise alignment—perfect for MIMO configurations or optimal targeting of cellular towers. Thanks to the N-type female connector, it is compatible with a wide range of professional-grade equipment.

JARFT Multiband 4G/5G omnidirectional antenna with up to 5dBi gain, SMA connector, and swivel joint. This rod antenna enhances the connection of your 4G or 5G router. The compact rod antenna screws directly onto your router, assuming it has external antenna connectors in SMA format.

The antenna covers both the traditional 4G frequency bands and the 5G frequency bands. It is suitable for all 4G and 5G frequency bands used in Europe. Typically, you will need two or four of these antennas for an LTE or 5G router.

Weatherproof, robust, and compact multiband 5G / 4G antenna. This directional antenna offers a solid gain of up to 8dBi, is extremely broadband, covers all 5G and 4G frequency bands, and can therefore be used universally for all 5G or 4G data connections. Using this antenna can significantly enhance your LTE or 5G data connection.

The design of the antenna is compact. The directional characteristics and strong signal bundling enable stable 4G or 5G connections even over long distances. The antenna must be aligned with the nearest mast of your 4G or 5G provider. Due to its weatherproof housing, this model can be easily used as an outdoor LTE or 5G antenna.

Solid mounting accessories for mast installation are included. A suitable antenna cable is optionally available in 2.5m, 5m, or 10m lengths. Using this antenna can significantly enhance your 4G or 5G data connection.

The Poynting LPDA-92 directional antenna is a high-performance log-periodic dipole antenna specifically designed for the reliable reception and transmission of mobile data in a wide range of environments. With a frequency range of 698 to 3800 MHz, it covers all common mobile communication standards – from 2G, 3G, and 4G/LTE to selected 5G frequency bands and Wi-Fi in the 2.4 GHz range – making it an extremely versatile solution for modern communication systems. The antenna offers a high gain of up to 11 dBi, ensuring significantly enhanced signal strength and improved connection stability, even in remote areas or under difficult reception conditions.

A key advantage of the LPDA-92 is its directional radiation pattern, which focuses the received or transmitted signal in a specific direction. This makes it ideal for use in rural or low-signal areas, where mobile network coverage is weak or unstable. When used in combination with an LTE or 5G router, it enables much faster data connections and can be deployed both stationary and mobile – for example in homes, offices, vacation properties, RVs, or boats. The LPDA-92 also provides a dependable wireless data solution for professional applications, including industrial facilities, video surveillance systems, and mechanical engineering.

The antenna supports a wide range of important frequency bands, including LTE Band 20 (800 MHz), Band 3 (1800 MHz), Band 7 (2600 MHz), as well as UMTS (2100 MHz) and GSM (900/1800 MHz). This makes it suitable not only for conventional mobile broadband connections, but also for use in M2M (Machine-to-Machine) applications and the Internet of Things (IoT), where stable data connectivity is critical for controlling and monitoring devices. Thanks to its broad frequency coverage, the LPDA-92 can be used flexibly in different countries and with a variety of network operators.

Our weatherproof and robust 2x2 MIMO Multiband 5G / 4G (LTE) Antenna offers outstanding performance. With a gain of up to 14dBi and tremendous broadband capability, it covers all 5G / 4G frequency bands, making it a universal solution for all 5G or 4G data connections. The directional characteristics and strong signal focusing ensure stable 4G or 5G connections even over long distances, requiring alignment with the nearest transmitter mast from your provider. Thanks to its weatherproof housing, it is ideal for outdoor use as an 4G and 5G outdoor antenna. Solid mounting accessories for mast installation are included in the package. Optionally, a suitable TWIN antenna cable in 2.5, 5m or 10m can be ordered.

The JARFT J5GMB-5-OMOA is a set consisting of two weather-resistant, omnidirectional multiband LTE (4G) / 5G antennas. The omnidirectional antenna has a gain of up to 5dBi, is very broadband (698 - 4000MHz), and therefore covers all LTE (4G) and 5G frequency bands. Thus, this antenna can be used for both LTE (4G) and 5G data connections. By using this antenna, you can enhance your data connection. The weatherproof housing allows the antenna to be used as an outdoor antenna. Due to its omnidirectional characteristic, the antenna does not need to be separately aligned and can be quickly and easily put into operation. The antenna is suitable for mast or direct wall mounting. Corresponding mounting accessories are included in the scope of delivery.

Weatherproof and robust 2x2 MIMO multiband 5G / 4G panel antenna from PROSCAN. The directional antenna offers a substantial gain of up to 9.5dBi, is extremely broadband (600 - 6000 MHz), covers all 5G and 4G frequency bands, and can therefore be universally used for all 5G or 4G data connections. By using this antenna, you can significantly enhance your 4G or 5G data connection.

The design of the antenna is compact. The directional characteristic and strong signal bundling enable stable 4G or 5G connections even over long distances. The antenna must be aimed at the nearest transmitter mast of your 4G or 5G provider. With its weatherproof housing according to IP65, this model can easily be used as an 4G or 5G outdoor antenna.

Solid mounting accessories with 2D regulation for mast and wall mounting are included in the package. The antenna comes with two 5m long antenna cables with SMA connectors. This way, the antenna can be directly connected to your 4G or 5G router. By using this antenna, you can significantly enhance your LTE or 5G data connection.

The QuPanel AP5G2 5G / 4G antenna from QuWireless is specifically designed for use as an outdoor 5G or 4G antenna. The AP5G2's casing is of high quality and fully weatherproof according to the IP67 standard. This makes the AP5G2 4G / 5G directional antenna extremely durable and consistently reliable. The antenna has a gain of 7dBi. Using this robust directional antenna can significantly enhance your data connection. Once properly aligned with the nearest transmission mast, you will achieve a substantial signal boost. Thanks to its wide frequency coverage, this multiband directional antenna can be universally used for 4G and/or 5G data connections in 2x2 MIMO operation. The 4G / 5G antenna comes with two 5-meter-long LMR195 antenna cables with SMA connectors. This allows the antenna to be directly connected to all common 4G or 5G routers with an external antenna port and be ready for immediate use.

QuPanel AP5G4 5G / 4G antenna from QuWireless is specifically designed for use as an outdoor 4x4 MIMO 5G or 4G antenna. The AP5G4's casing is of high quality and fully weatherproof according to the IP67 standard. This makes the AP5G4 4G / 5G directional antenna extremely durable and consistently reliable. This directional antenna has a gain of 7dBi. Using this robust directional antenna can significantly enhance your data connection. Once properly aligned with the nearest transmission mast, you will achieve a substantial signal boost. Thanks to its wide frequency coverage, this multiband directional antenna can be universally used for 4G and/or 5G data connections in 4x4 MIMO operation. The 4G / 5G antenna comes with four 5-meter-long LMR195 antenna cables with SMA connectors. This allows the antenna to be directly connected to all common 4G or 5G routers with an external antenna port and be ready for immediate use.

The QuPanel AP5G2-G LTE / 5G antenna from QuWireless is specifically designed for use as 2x2 MIMO directional outdoor 5G or 4G antenna. The antenna is primarily designed for 5G / 4G / 3G / 2G devices that require highly efficient connections and covers many 4G and 5G bands, including the new extended band 71. In principle, the directional antenna can be used for applications from 617 to 6000 MHz.The AP5G2-G casing is of high quality and fully weatherproof according to the IP67 standard. This makes the AP5G2-G 4G / 5G directional antenna extremely durable and consistently reliable. The antenna has a gain of 7dBi. Using this robust directional antenna can significantly enhance your data connection. Once properly aligned with the nearest transmission mast, you will achieve a substantial signal boost. Thanks to its wide frequency coverage, this multiband directional antenna can be universally used for 4G and/or 5G data connections in 2x2 MIMO operation. The 4G / 5G antenna comes with two 5-meter-long LMR195 antenna cables with SMA connectors. This allows the antenna to be directly connected to all common 4G or 5G routers with an external antenna port and be ready for immediate use.

The QuPanel AP5G4-G LTE / 5G antenna from QuWireless is specifically designed for use as 4x4 MIMO directional outdoor 5G or 4G antenna. The antenna is primarily designed for 5G / 4G / 3G / 2G devices that require highly efficient connections and covers many 4G and 5G bands, including the new extended band 71. In principle, the directional antenna can be used for applications from 617 to 6000 MHz.The AP5G4-G casing is of high quality and fully weatherproof according to the IP67 standard. This makes the AP5G4-G 4G / 5G directional antenna extremely durable and consistently reliable. The antenna has a gain of 7dBi. Using this robust directional antenna can significantly enhance your data connection. Once properly aligned with the nearest transmission mast, you will achieve a substantial signal boost. Thanks to its wide frequency coverage, this multiband directional antenna can be universally used for 4G and/or 5G data connections in 4x4 MIMO operation. The 4G / 5G antenna comes with four 5-meter-long LMR195 antenna cables with SMA connectors. This allows the antenna to be directly connected to all common 4G or 5G routers with an external antenna port and be ready for immediate use.

The QuOmni AO5G2-G antenna from QuWireless is specifically designed for use as a 2x2 MIMO 5G or 4G outdoor antenna and can be used worldwide. The antenna is primarily designed for 5G / 4G / 3G / 2G devices that require highly efficient connections and covers many 4G and 5G bands, including the new extended band 71. Essentially, the omnidirectional antenna can be used for applications from 617 to 6000 MHz. The AO5G2-G's casing is of high quality and fully weatherproof according to the IP67 standard. This makes the AO5G2-G LTE / 5G omnidirectional antenna extremely durable and consistently reliable. The antenna has a gain of 4dBi and is technically very sophisticated. Using this robust omnidirectional antenna can easily enhance your 4G or 5G data connection. Due to its omnidirectional characteristic, this antenna does not need to be aligned and can be operated either stationary or mobile. Thanks to its wide frequency coverage, this multiband 4G / 5G omnidirectional antenna can be universally used for 4G and/or 5G data connections in 2x2 MIMO operation. The 4G / 5G antenna comes with two 5-meter-long LMR195 antenna cables with SMA connectors. This allows the antenna to be directly connected to all common 4G or 5G routers with an external antenna port and be ready for immediate use.

The QuOmni AO5G4-G antenna from QuWireless is specifically designed for use as a 4x4 MIMO 5G or 4G outdoor antenna and can be used worldwide. The antenna is primarily designed for 5G / 4G / 3G / 2G devices that require highly efficient connections and covers many 4G and 5G bands, including the new extended band 71. Essentially, the omnidirectional antenna can be used for applications from 617 to 6000 MHz. The AO5G2-G's casing is of high quality and fully weatherproof according to the IP67 standard. This makes the AO5G4-G LTE / 5G omnidirectional antenna extremely durable and consistently reliable. The antenna has a gain of 4dBi and is technically very sophisticated. Using this robust omnidirectional antenna can easily enhance your 4G or 5G data connection. Due to its omnidirectional characteristic, this antenna does not need to be aligned and can be operated either stationary or mobile. Thanks to its wide frequency coverage, this multiband 4G / 5G omnidirectional antenna can be universally used for 4G and/or 5G data connections in 4x4 MIMO operation. The 4G / 5G antenna comes with four 5-meter-long LMR195 antenna cables with SMA connectors. This allows the antenna to be directly connected to all common 4G or 5G routers with an external antenna port and be ready for immediate use.

The Panorama Antennas WMM8G-7-38 antenna is a high gain directional 2x2 MIMO signal boosting antenna for 4G and some 5G networks. Incorporating two separately fed wideband elements in a single housing the WMM8G is equipped to provide client side MIMO and diversity support for 4G and some 5G networks. The rugged, weatherproof housing is designed for wall mounting. The antenna has a gain of 6-9dbi and 5m Twin cable with SMA male connector.

The Panorama DMM-7-38-2SP is a high-performance 5G/LTE omnidirectional antenna with a 5 dBi gain, designed to provide a reliable and stable mobile data connection. It supports a wide frequency range from 698–3800 MHz, making it compatible with 2G, 3G, 4G, and 5G networks. With its compact and modern design, it is ideal for use with mobile routers, IoT applications, or home networking.

This antenna is designed exclusively for indoor use and can be easily placed on a table, windowsill, or attached directly to a window using the included suction cups. Equipped with a 2-meter twin cable and SMA connectors, it ensures easy installation and optimal placement for improved signal reception. The DMM-7-38-2SP is the perfect solution for high-performance wireless connectivity indoors.

The DMM-6-60-2SP portable antenna is an innovative antenna design which provides 2x2 MiMo function for 4G/5G with fallback to 3G/2G . The DMM-6-60-2SP antenna is a future proof solution for Cat 18/20 4G and 5G devices. Incorporating two separately fed, ultra wide band elements for 617-960 / 1710- 6000MHz in a single housing, the DMM4 provides a 2x2 MiMo function. The antenna has a peak gain of 5dBi and is equipped with 2 x 2m RG174 antenna cable with SMA male connector.

The Panorama DMM-7-38-2SP is a high-performance 5G/LTE omnidirectional antenna with a 5 dBi gain, designed to provide a reliable and stable mobile data connection. It supports a wide frequency range from 698–3800 MHz, making it compatible with 2G, 3G, 4G, and 5G networks. With its compact and modern design, it is ideal for use with mobile routers, IoT applications, or home networking.

This antenna is designed exclusively for indoor use and can be easily placed on a table, windowsill, or attached directly to a window using the included suction cups. Equipped with a 2-meter twin cable and TS-9 connectors, it ensures easy installation and optimal placement for improved signal reception. The DMM-7-38-2SP is the perfect solution for high-performance wireless connectivity indoors.

The DMM4-6-60-2SP portable antenna is an innovative antenna design which provides 4x4 MiMo function for 4G/5G with fallback to 3G/2G . The DMM4-6-60-2SP antenna is a future proof solution for Cat 18/20 4G and 5G devices. Incorporating four separately fed, ultra wide band elements for 617-960 / 1710- 6000MHz in a single housing, the DMM4 provides a 4x4 MiMo function. It can also provide 2x 2x2 MiMo function for a router with dual modems, each requiring a 2x2 antenna system. The antenna has a peak gain of 5dBi and is equipped with 4 x 2m RG174 antenna cable with SMA male connector.