JARFT
Items 1 - 30 of 104
Compact WiFi omnidirectional / rod antenna with 2 dBi gain, suitable for short distances, supporting all common WiFi standards in the 2.4 GHz frequency band (IEEE 802.11b/g/n).
The signal is evenly radiated in all directions due to the nearly spherical radiation pattern of the dipole element. Therefore, this WiFi antenna is also suitable for covering areas that span multiple floors, for example.
The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a hinge, and can be directly screwed onto a router or access point. The antenna's casing is made of black plastic.
The signal is evenly radiated in all directions due to the nearly spherical radiation pattern of the dipole element. Therefore, this WiFi antenna is also suitable for covering areas that span multiple floors, for example.
The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a hinge, and can be directly screwed onto a router or access point. The antenna's casing is made of black plastic.
- SKU:
- ART5484
- GTIN:
- 4251028600994
- Shipping weight:
- 0,06 kg
- Item weight:
- 0,01 kg
2.4GHz WiFi omnidirectional antenna for use in IoT, M2M or automotive scenarios. The WiFi antenna is specially designed for installation on ceilings, equipment cabinets, work tables, vending machines, machines or vehicles. The compact omnidirectional antenna has a power gain of 5dBi in the 2.4GHz frequency band and a compact, robust plastic housing (available in white or black) which meets the IP65 standard. This means that the antenna can also be used as outdoor antenna without any problems. On the underside of the antenna is a 2.5cm long plastic thread with a lock nut. A rubber lip on the edge of the housing provides additional protection against moisture penetration. The antenna cable (available in 30cm or 150cm length) of type CLF100 is equipped with an RP-SMA connector.
- SKU:
- ART7376
- Variations in:
-
- Antenna cable
- Color
- GTIN:
- 4251028604206
- Shipping weight:
- 0,15 kg
- Item weight:
- 0,09 kg
The JARFT J4GMB-14-DOMPA multiband 4G directional antenna provides a gain of up to 14dBi and supports all 4G frequency bands (800 MHz, 1800 MHz, 2600 MHz). Therefore, the antenna can be used universally for all 4G providers and significantly enhances your 4G connection.
Due to its weatherproof design, the antenna can be easily used outdoors as an 4G outdoor antenna. Once properly aligned and mounted, this 4G directional antenna delivers consistent results and ensures a stable 4G data connection.
The 4G antenna is available either without an antenna cable or with a 2.5m / 5m / 10m twin antenna cable (N connector suitable for the antenna, SMA connector suitable for all common 4G routers). If you are using a mobile router or a Cube, you may need an adapter to TS-9. You can, of course, find this in our assortment.
Due to its weatherproof design, the antenna can be easily used outdoors as an 4G outdoor antenna. Once properly aligned and mounted, this 4G directional antenna delivers consistent results and ensures a stable 4G data connection.
The 4G antenna is available either without an antenna cable or with a 2.5m / 5m / 10m twin antenna cable (N connector suitable for the antenna, SMA connector suitable for all common 4G routers). If you are using a mobile router or a Cube, you may need an adapter to TS-9. You can, of course, find this in our assortment.
Flat 2.4GHz WiFi omnidirectional antenna with 4dBi gain, articulated joint, and RP-SMA connector. The antenna is suitable for standard 2.4GHz WiFi networks (IEEE 802.11b/g/n).
The 4dBi gain of this WiFi omnidirectional antenna results in a slight concentration of the signal within the vertical radiation pattern. Therefore, the antenna is well-suited for larger, even taller spaces, though it may not be ideal for WiFi coverage across multiple floors.
Designed for indoor use, the WiFi omnidirectional antenna features an RP-SMA connector with an articulated joint and can be directly attached to a router or access point. The housing of the WiFi antenna is made of white plastic.
The 4dBi gain of this WiFi omnidirectional antenna results in a slight concentration of the signal within the vertical radiation pattern. Therefore, the antenna is well-suited for larger, even taller spaces, though it may not be ideal for WiFi coverage across multiple floors.
Designed for indoor use, the WiFi omnidirectional antenna features an RP-SMA connector with an articulated joint and can be directly attached to a router or access point. The housing of the WiFi antenna is made of white plastic.
- SKU:
- ART6511
- GTIN:
- 4251028601007
- Shipping weight:
- 0,07 kg
- Item weight:
- 0,02 kg
Dual-band 2.4 / 5GHz WiFi omnidirectional antenna designed for IoT, M2M, or automotive applications. This WiFiantenna is specifically designed for installation on ceilings, equipment cabinets, worktables, vending machines, machinery, or vehicles. The compact omnidirectional antenna has a gain of 3dBi in 2.4 GHz and 5dBi in 5 GHz WiFi frequency band. It features a compact, robust plastic housing (available in white or black) that complies with IP65 standards, allowing the antenna to be used outdoors without issues. The underside of the antenna has a 2.5cm plastic thread with a lock nut. A rubber lip on the edge of the housing provides additional protection against moisture. The antenna cable (available in 30cm or 150cm length) of type CLF100 comes with an RP-SMA connector.
The JARFT J4GMB-12-OMOA multiband 2x2 MIMO 4G omnidirectional antenna provides a gain of up to 12dBi and covers all 4G frequency bands used in Germany and Europe (800, 1800, 2600 MHz). Therefore, the 4G antenna is universally suitable for all providers and 4G networks and does not require separate alignment due to its omnidirectional characteristic. By using this 4G multiband antenna, you can enhance your 4G connection.
The design of the 4G antenna is compact, making it discreet and suitable for installation even in limited space. The corresponding mounting accessories for mast installation are included.
The 4G omnidirectional antenna is available either without antenna cables or with a 2.5m / 5m / 10m twin antenna cable (N connector compatible with the antenna, SMA connector compatible with all common 4G routers). If you are using a mobile router or a Cube, you may need an adapter to TS-9, which you can find in our product range.
The design of the 4G antenna is compact, making it discreet and suitable for installation even in limited space. The corresponding mounting accessories for mast installation are included.
The 4G omnidirectional antenna is available either without antenna cables or with a 2.5m / 5m / 10m twin antenna cable (N connector compatible with the antenna, SMA connector compatible with all common 4G routers). If you are using a mobile router or a Cube, you may need an adapter to TS-9, which you can find in our product range.
Out of stock
Multiband LTE omnidirectional antenna with up to 5dBi performance gain, SMA connector and articulated joint. With this 4G antenna you easily strengthen the connection of your 4G router. The compact rod antenna is screwed directly onto your 4G router. External 4G antenna connectors in SMA format are required for this. The 4G omnidirectional antenna is suitable for all 3G and 4G frequency bands used in Europe. As a rule, you need two of these antennas for an router.
- SKU:
- ART6666
- GTIN:
- 4251028603384
- Shipping weight:
- 0,10 kg
- Item weight:
- 0,04 kg
2.4GHz WiFi omnidirectional antenna with 7 dBi gain, swivel joint, and RP-SMA connector. The antenna is suitable for standard 2.4GHz WiFi networks (IEEE 802.11b/g/n).
The 7 dBi gain of this WiFi omnidirectional antenna results in a vertical beamwidth of 17°, focusing the signal. Therefore, the antenna is very suitable for larger rooms but not necessarily ideal for WiFi coverage over multiple floors.
The WiFi omnidirectional antenna is designed for indoor use, featuring an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.
The 7 dBi gain of this WiFi omnidirectional antenna results in a vertical beamwidth of 17°, focusing the signal. Therefore, the antenna is very suitable for larger rooms but not necessarily ideal for WiFi coverage over multiple floors.
The WiFi omnidirectional antenna is designed for indoor use, featuring an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.
- SKU:
- ART5218
- GTIN:
- 4251028601021
- Shipping weight:
- 0,10 kg
- Item weight:
- 0,05 kg
This compact 2x2 MIMO dual band 2.4 / 5 GHz WiFi omni-directional antenna is designed for installation on ceilings, equipment cabinets, work desks, vending machines, machinery, or vehicles. It features a compact design with a 3dBi @ 2.4GHz and 5dBi @ 5GHz frequency band. The antenna is housed in a sturdy, white plastic casing (also available in black) that meets the IP65 standard, making it suitable for outdoor use. The bottom of the WiFi antenna is equipped with a 2.5cm plastic thread and a locking nut for easy installation. A rubber lip on the edge of the housing provides additional protection against moisture infiltration. The two 150cm long antenna cables, type CLF100, are fitted with an RP-SMA connector each.
- SKU:
- ART7379
- Variations in:
-
- Color
- GTIN:
- 4251028604237
- Shipping weight:
- 0,15 kg
- Item weight:
- 0,09 kg
2.4GHz WiFi omnidirectional antenna with 9dBi gain, swivel joint, and RP-SMA connector. The antenna is suitable for standard 2.4GHz WiFi networks (IEEE 802.11b/g/n).
The 9dBi gain of this WiFi omnidirectional antenna results in a vertical beamwidth of 12°, focusing the signal. Therefore, the antenna is very suitable for large rooms but not necessarily ideal for WiFi coverage over multiple floors.
The WiFi omnidirectional antenna is designed for indoor use, featuring an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.
The 9dBi gain of this WiFi omnidirectional antenna results in a vertical beamwidth of 12°, focusing the signal. Therefore, the antenna is very suitable for large rooms but not necessarily ideal for WiFi coverage over multiple floors.
The WiFi omnidirectional antenna is designed for indoor use, featuring an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.
- SKU:
- ART5125
- GTIN:
- 4251028601038
- Shipping weight:
- 0,11 kg
- Item weight:
- 0,06 kg
2x2 MIMO dual-band 2.4 / 5 - 7:1 GHz WiFi omnidirectional antenna for installation on ceilings, equipment cabinets, worktables, vending machines, machinery, or vehicles. The compact omnidirectional antenna has a gain of 3dBi in the 2.4 GHz as well as the 5 GHz and the new 6 GHz frequency bands, and a compact, robust plastic housing (available in black or white) that complies with the IP65 standard. Thus, the antenna can also be easily used as an outdoor antenna. On the underside of the WiFi antenna, there is a 2.5cm long plastic thread with a lock nut. A rubber lip on the housing edge provides additional protection against the penetration of moisture into the object on which the antenna is mounted. The two 150cm long CLF100 type antenna cables each have an RP-SMA connector. This antenna covers not only the classic frequency bands of 2.4 GHz and 5 GHz but also the extended 6 GHz band. Therefore, this antenna is capable of being used in WiFi 6E scenarios.
- SKU:
- ART7382
- Variations in:
-
- Color
- GTIN:
- 4251028604268
- Shipping weight:
- 0,15 kg
- Item weight:
- 0,09 kg
Weatherproof 2.4GHz WiFi omnidirectional antenna / rod antenna with 5 dBi gain and RP-SMA connector. The antenna is suitable for standard 2.4GHz WiFi networks (IEEE 802.11b/g/n). The RP-SMA antenna connection is sealed with a rubber O-ring. The antenna housing material is UV-resistant.
The 5 dBi gain of this WiFi omnidirectional antenna results in a vertical beamwidth of 40°, focusing the signal. Therefore, the antenna is well-suited for illuminating small outdoor areas.
The WiFi omnidirectional antenna is explicitly designed for outdoor use and can be directly attached to a router or access point. The casing of the WiFi antenna is made of gray plastic.
The 5 dBi gain of this WiFi omnidirectional antenna results in a vertical beamwidth of 40°, focusing the signal. Therefore, the antenna is well-suited for illuminating small outdoor areas.
The WiFi omnidirectional antenna is explicitly designed for outdoor use and can be directly attached to a router or access point. The casing of the WiFi antenna is made of gray plastic.
- SKU:
- ART5680
- GTIN:
- 4251028601045
- Shipping weight:
- 0,08 kg
- Item weight:
- 0,03 kg
Multiband 2x2 MIMO 4G Omni-directional Antenna for installation on ceilings, equipment cabinets, work tables, vending machines, machinery, or vehicles. The compact omni-directional antenna provides a gain of 1-4dBi and features a compact, sturdy, plastic housing (available in black and white) that complies with the IP65 standard. Therefore, the antenna can be easily used outdoors. On the underside of the 4G antenna, there is a 2.5cm long plastic thread with a lock nut. A rubber lip on the housing edge provides additional protection against the penetration of moisture into the object on which the antenna is mounted. The two antenna cables (available in 30cm and 150cm) of the RG174 type are each equipped with an SMA connector and can thus be connected to all common 4G routers or gateways.
- SKU:
- ART7390
- Variations in:
-
- Antenna cable / Connector
- Color
- GTIN:
- 4251028604336
- Shipping weight:
- 0,15 kg
- Item weight:
- 0,09 kg
The powerful 5-in-1 multiband 4G / WiFi / GPS antenna can be used, for example, as a vehicle antenna, installed on vending machines or equipment cabinets, or even for ceiling installations. The antenna housing is made of robust, weatherproof, and durable plastic. The multiband antenna can be used in temperatures ranging from -30°C to +85°C. The all-around antenna supports all 4G frequencies used in Europe, as well as GPS/GLONASS and the 2.4/5 GHz WiFi frequency bands. The antenna provides a gain of up to 4dBi.
The 50 Ohm coaxial antenna cable type RF-240 is a low-loss and high-quality antenna cable. It comes with the connector combination N male plug to RP-SMA male plug in the desired length, making it ideal for connecting a WiFi antenna to a WiFi router. Typically, WiFi outdoor antennas have an N female socket, while WiFi routers have an RP-SMA female socket. This cable fits perfect to this situation.
The cable is UV and moisture resistant, suitable for outdoor use. Due to its low attenuation (double shielding) and high bending radius, the cable is very suitable for WiFi frequency bands 2.4 GHz and 5 GHz. In general, the RF-240 cable is suitable for applications up to 6 GHz where a flexible cable is required.
This pre-assembled cable is available in lengths of 1m, 3m, 5m, and 10m. If you need a different length, we recommend using our cable configurator.
The cable is UV and moisture resistant, suitable for outdoor use. Due to its low attenuation (double shielding) and high bending radius, the cable is very suitable for WiFi frequency bands 2.4 GHz and 5 GHz. In general, the RF-240 cable is suitable for applications up to 6 GHz where a flexible cable is required.
This pre-assembled cable is available in lengths of 1m, 3m, 5m, and 10m. If you need a different length, we recommend using our cable configurator.
- SKU:
- ART7406
- Variations in:
-
- Cable lenght
- GTIN:
- 4251028602202
- Shipping weight:
- 0,09 kg
- Item weight:
- 0,08 kg
The 50 Ohm coaxial antenna cable type RF-240 is a low-loss and high-quality antenna cable. It comes with the connector combination RP-SMA male to RP-SMA female in the desired length, making it ideal for extending an existing cable connection between a WiFi antenna and a WiFi router.
The cable is UV and moisture resistant, suitable for outdoor use. Due to its low attenuation (double shielding) and high bending radius, the cable is very suitable for WiFi frequency bands 2.4 GHz and 5 GHz. In general, the RF-240 cable is suitable for applications up to 6 GHz where a flexible cable is required.
This pre-assembled cable is available in lengths of 1m, 3m, 5m, and 10m. If you need a different length, we recommend using our cable configurator.
The cable is UV and moisture resistant, suitable for outdoor use. Due to its low attenuation (double shielding) and high bending radius, the cable is very suitable for WiFi frequency bands 2.4 GHz and 5 GHz. In general, the RF-240 cable is suitable for applications up to 6 GHz where a flexible cable is required.
This pre-assembled cable is available in lengths of 1m, 3m, 5m, and 10m. If you need a different length, we recommend using our cable configurator.
This coaxial adapter / T-piece adapter features an RP-SMA male to 2 x RP-SMA female connector combination. The adapter is characterized by its solid quality, the associated long lifespan and the low attenuation value.
Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a T-piece, functioning as a coaxial splitter.
The following always applies at our webshop: If you are unsure which coaxial adapter you need, please feel free to contact us.
Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a T-piece, functioning as a coaxial splitter.
The following always applies at our webshop: If you are unsure which coaxial adapter you need, please feel free to contact us.
- SKU:
- ART5090
- GTIN:
- 4251028601335
- Shipping weight:
- 0,01 kg
- Item weight:
- 0,01 kg
Out of stock
Compact WiFi omnidirectional antenna / rod antenna with a 2dBi gain in the 2.4GHz frequency band and 3dBi in the 5GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands (IEEE 802.11b/g/n/ac/ax).
The signal is evenly radiated in all directions due to the nearly spherical radiation pattern of the dipole element. Therefore, this WiFi antenna is also suitable for covering areas such as multiple floors.
The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.
The signal is evenly radiated in all directions due to the nearly spherical radiation pattern of the dipole element. Therefore, this WiFi antenna is also suitable for covering areas such as multiple floors.
The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.
- SKU:
- ART5527
- GTIN:
- 4251028600970
- Shipping weight:
- 0,06 kg
- Item weight:
- 0,01 kg
This coaxial adapter / T-piece adapter features an RP-SMA female to 2 x RP-SMA female connector combination. The adapter is characterized by its solid quality, the associated long lifespan and the low attenuation value.
Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a T-piece, functioning as a coaxial splitter.
The following always applies at our webshop: If you are unsure which coaxial adapter you need, please feel free to contact us.
Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a T-piece, functioning as a coaxial splitter.
The following always applies at our webshop: If you are unsure which coaxial adapter you need, please feel free to contact us.
- SKU:
- ART5091
- GTIN:
- 4251028602226
- Shipping weight:
- 0,01 kg
- Item weight:
- 0,01 kg
The antenna cable type H-155 is a low-loss and quite flexible coaxial antenna cable. Due to its low attenuation (double shielding), the cable is well-suited for applications up to 3GHz (WLAN, LoRa, GSM, UMTS, or LTE). In direct comparison to the RF240 coaxial cable (also available with us), the H155 cable is not equipped with a rigid inner conductor but with a composite of copper strands. This provides higher flexibility but also slightly weaker attenuation values. The H-155 cable is designed for use up to 3GHz, while the RF-240 cable is designed for use up to 6GHz. Through our cable configurator, you can order the cable in various lengths with different connectors. Simply choose the connectors and length you need. The cable will then be assembled by hand by us. This allows us to accommodate individual preferences and ensure consistently high quality. An express service option is also available.
- SKU:
- ART7466
- Variations in:
-
- Length
- Connector 1st Cable end
- Connector 2nd Cable end
- Connection assembly
- …
- GTIN:
- 4251028604404
- Shipping weight:
- 0,05 kg
- Item weight:
- 0,01 kg
Out of stock
This cavity bandpass filter is specially designed for the LoRa / Helium frequency band and impresses with its very good technical parameters. By using this filter, interfering signals from other frequency bands, such as the 4G 800MHz frequency band, are filtered out and attenuated very efficiently. In this way, signals from much greater distances can be received and processed with little interference. Especially the good signal suppression and the low insertion loss of less then 1dB perform extremely well with this model. Compared to a SAW filter, this cavity filter has significantly better performance and delivers a much better result.
Out of stock
Compact WiFi omnidirectional antenna / rod antenna with a 2dBi gain in the 2.4GHz frequency band and 3dBi in the 5GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands (IEEE 802.11b/g/n/ac/ax).
The signal is evenly radiated in all directions due to the nearly spherical radiation pattern of the dipole element. Therefore, this WiFi antenna is also suitable for covering areas such as multiple floors.
The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of white plastic.
The signal is evenly radiated in all directions due to the nearly spherical radiation pattern of the dipole element. Therefore, this WiFi antenna is also suitable for covering areas such as multiple floors.
The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of white plastic.
- SKU:
- ART7185
- GTIN:
- 4251028603735
- Shipping weight:
- 0,06 kg
- Item weight:
- 0,01 kg
This coaxial adapter / T-piece adapter features an SMA male to 2 x SMA female connector combination. The adapter is characterized by its solid quality, the associated long lifespan and the low attenuation value.
Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a T-piece, functioning as a coaxial splitter.
The following always applies at our webshop: If you are unsure which coax adapter you need, please feel free to contact us.
Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a T-piece, functioning as a coaxial splitter.
The following always applies at our webshop: If you are unsure which coax adapter you need, please feel free to contact us.
- SKU:
- ART6287
- GTIN:
- 4251028601342
- Shipping weight:
- 0,01 kg
- Item weight:
- 0,01 kg
he RF-240 antenna cable is a very low-loss, high-quality, and cost-effective coaxial antenna cable. Due to its low attenuation (double shielding), the cable is very well-suited for WLAN, LoRa, GSM, UMTS, LTE, or even 5G frequency bands and applications up to 6GHz. In comparison to the H-155 cable, which is also available with us, the RF-240 cable has a rigid inner conductor. Therefore, RF-240 is not as flexible as H-155, but it has better attenuation values and is suitable for applications up to 6GHz without any issues. Through our cable configurator, you can order the cable in various lengths with different connectors. Simply choose the connectors and length you need. The cable will then be assembled by hand by us. This allows us to accommodate individual preferences and ensure consistently high quality. An express service option is also available.
Compact WiFi omnidirectional antenna / rod antenna with flat design a 3dBi gain in the 2.4GHz frequency band and 4dBi in the 5GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands (IEEE 802.11b/g/n/ac/ax). The signal is radiated with a 360° horizontal and 50° vertical spread.
The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.
The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.
- SKU:
- ART5616
- GTIN:
- 4251028601007
- Shipping weight:
- 0,07 kg
- Item weight:
- 0,02 kg
Out of stock
This coaxial adapter has the connector combination of RP-SMA male to SMA male and is angled (90°). The adapter stands out for its solid quality, long lifespan, and low attenuation value.
Such a coaxial adapter can be used to switch from one coaxial connector format to another. In this case, it is an angled coaxial adapter.
As always with us, the following applies: If you are unsure about which coaxial adapter you need, please feel free to contact us.
Such a coaxial adapter can be used to switch from one coaxial connector format to another. In this case, it is an angled coaxial adapter.
As always with us, the following applies: If you are unsure about which coaxial adapter you need, please feel free to contact us.
- SKU:
- ART7464
- GTIN:
- 4251028601588
- Shipping weight:
- 0,05 kg
- Item weight:
- 0,01 kg
Compact WiFi omnidirectional antenna / rod antenna with a 2dBi gain in the 2.4GHz frequency band and 3dBi in the 5GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands (IEEE 802.11b/g/n/ac/ax).
Omnidirectional WiFi Antennas in general are charcteristically constructed to cover large areas and to provide the WiFi Signal all-over into all directions. This WiFi Antenna has a horizontal beamwidth of 360° and a vertical beamwidth of 12° which allows to use this WiFi Omni Antenna in single-storey buildings.
The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.
Omnidirectional WiFi Antennas in general are charcteristically constructed to cover large areas and to provide the WiFi Signal all-over into all directions. This WiFi Antenna has a horizontal beamwidth of 360° and a vertical beamwidth of 12° which allows to use this WiFi Omni Antenna in single-storey buildings.
The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The casing of the WiFi antenna is made of black plastic.
- SKU:
- ART5555
- GTIN:
- 4251028600987
- Shipping weight:
- 0,10 kg
- Item weight:
- 0,05 kg
This 50 ohm coaxial adapter has the connector combination of RP-TNC male to RP-SMA female. The adapter stands out for its solid quality, long lifespan, and low attenuation value.
Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a coax adapter with RP-TNC male to RP-SMA female connectors.
As always with us, the following applies: If you are unsure which coaxial adapter you need, please feel free to contact us.
Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a coax adapter with RP-TNC male to RP-SMA female connectors.
As always with us, the following applies: If you are unsure which coaxial adapter you need, please feel free to contact us.
- SKU:
- ART5086
- GTIN:
- 4251028601359
- Shipping weight:
- 0,02 kg
- Item weight:
- 0,02 kg
Compact WiFi omnidirectional antenna / rod antenna with a 3dBi gain in the 2.4GHz frequency band and 4dBi in the 5-7.1 GHz frequency band, suitable for short distances and supporting all common WiFi standards in the 2.4 and 5 GHz frequency bands as well as the new extended WiFi 6E standard with a frequency range up to 7100 MHz (IEEE 802.11b/g/n/ac/ax). The signal is radiated with 360° horizontal and 50° vertical coverage.
The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The flat casing of the WiFi antenna is made of black plastic.
The WiFi omnidirectional antenna is designed for indoor use, features an RP-SMA connector with a swivel joint, and can be directly screwed onto a router or access point. The flat casing of the WiFi antenna is made of black plastic.
- SKU:
- ART7383
- GTIN:
- 4251028604275
- Shipping weight:
- 0,07 kg
- Item weight:
- 0,02 kg
This 50 ohm coaxial adapter has the connector combination of RP-SMA male to N female. The adapter stands out for its solid quality, long lifespan, and low attenuation value.
Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a coax adapter with RP-SMA male to N female connectors.
As always with us, the following applies: If you are unsure which coaxial adapter you need, please feel free to contact us.
Such a coaxial adapter can be used to convert from one coaxial connector format to another. In this case, it is a coax adapter with RP-SMA male to N female connectors.
As always with us, the following applies: If you are unsure which coaxial adapter you need, please feel free to contact us.
- SKU:
- ART5085
- GTIN:
- 4251028601366
- Shipping weight:
- 0,02 kg
- Item weight:
- 0,02 kg
Items 1 - 30 of 104