PoE Injectors / Power Supplies

Your proven Ubiquiti device needs power, but a standard outlet is miles away? Are you worried that incorrect Power Supply could damage your expensive hardware? The Ubiquiti POE-15-12W is the tailored solution for your legacy hardware. This 15V PoE Injector was specifically developed as a Power Supply for airMAX ac Components and other compatible Ubiquiti components, reliably delivering power and data over a single Ethernet Cable.The POE-15-12W supplies your end device with stable 15 volts...

With a maximum surge discharge of 1500A, this injector offers more than just power – it's a shield for your hardware. The Ubiquiti POE-24-12W is the original and absolutely reliable 24V PoE Injector, specifically designed as a Power Supply for NanoStation M2, Loco M, airGateway, and many older UniFi Access Points. If you're looking for a replacement for your airMAX system or need a passive PoE Power Supply, this is the first choice among PoE Injectors / Power Supplies.This adapter deliver...

Imagine your WiFi Access Point on the ceiling or your airMAX Antenna on the roof being supplied with data and power via a single, inconspicuous cable. No cable clutter, no additional power outlet at the mounting location. The Ubiquiti POE-24-12W-G makes exactly this possible, ensuring a clean, reliable, and professional installation of your Network components. It's the perfect solution if you want to buy a Ubiquiti 24V PoE Injector to stably operate your system.This compact adapter feeds ...

Do you want to install a Ubiquiti Access Point or a camera in a location without a power outlet? Laying new power lines is expensive and complicated, and a large Ethernet Switch is often overkill for a single device. The Ubiquiti PoE Injector POE-24-24W is the elegant and cost-effective solution: It feeds power and data into a single Ethernet Cable, reliably powering your end device exactly where you need it. This allows you to flexibly expand your Network without compromising on placement....

With a stable output power of 24V at 1.0A and full Gigabit speed, the Ubiquiti POE-24-24W-G is the professional Power Supply for your Network. This 24W passive Gigabit PoE Injector was specially developed for the reliable Power Supply of Ubiquiti devices such as UniFi Access Points or airMAX ac Components. It not only ensures stable power but also effectively protects your valuable hardware from overvoltages.The injector permanently feeds voltage to wire pairs 4, 5 (+) and 7, 8 (-), which...

The direct benefit: This Ubiquiti 24V 30W PoE Adapter delivers stable 30 watts of power and comprehensive device protection where standard injectors fall short. If you want to buy a PoE Injector for the NanoSwitch or reliably power other demanding airMAX devices, the POE-24-30W-G-WH is the first choice. It combines high performance with Gigabit speed, ensuring a stable and fast connection for your Network.Unlike simpler models, this injector guarantees that the full bandwidth of your Netw...

Imagine installing a WiFi Access Point or an IP Camera in the perfect spot – high up on a wall or ceiling for optimal reception, but there's no power outlet in sight. With the Ubiquiti PoE Injector POE-48-24W, this problem is a thing of the past. This small powerhouse supplies your Network devices with power and data over a single Ethernet Cable. The result: less cable clutter, maximum installation flexibility, and a tidy, professional setup that simply works.This PoE Adapter 48V 24W was ...

The direct benefit: Give your Ubiquiti devices the stable and secure Power Supply they deserve. The Ubiquiti PoE Injector POE-48-24W-G is the professional solution for powering compatible UniFi Access Points, IP Cameras, or airMAX ac Components with both power and data over a single Network cable – and at full Gigabit speed. Unlike standard power adapters, this PoE Adapter 48V Gigabit offers integrated overvoltage protection, safeguarding your valuable hardware from damage.This Ubiquiti P...

With a robust 60 Watts of output power, the Ubiquiti POE-50-60W reliably supplies even the most demanding Network devices with power. This powerful Gigabit PoE Injector is the ideal PoE Power Supply for G4 PTZ Cameras, airFiber systems, or other high-power applications that require more than standard PoE+. Thanks to 4-pair powering, the full power is stably transmitted over the Ethernet Cable without affecting the Gigabit data rate.The injector was designed for maximum reliability and dur...

With a clamping voltage protection of 11V for data lines and 60V for power lines, the Ubiquiti U-POE-af reliably protects your valuable Network devices from overvoltages. This 802.3af PoE Adapter is the ideal solution if you want to power an IP Camera or retrofit the Network cable Power Supply for a UniFi Access Point.It delivers up to 15.4 Watts of power and full Gigabit speed, without slowing down your Network. Thanks to its compact design and the included wall mount, the injector can b...

The Ubiquiti U-POE-at is the ultimate Power Supply solution to upgrade your Network without expensive switch replacement. It delivers stable 30 watts of power according to the 802.3at PoE+ standard, making it the perfect choice as a Power Supply for UniFi U6-LR Access Points, PTZ IP Cameras, and other power-hungry devices. This allows you to flexibly install your end devices exactly where you need them – even without a power outlet nearby.This 30W PoE Injector Gigabit adapter converts a s...

With a robust 60 Watts of output power, compliant with the PoE++ standard IEEE 802.3bt, the Ubiquiti U-POE++ Injector reliably powers even the most demanding Network devices. If you are looking for a PoE++ adapter for a latest-generation UniFi Access Point or a G4 PTZ Camera, this is the perfect solution to upgrade a single port without having to replace the entire Ethernet Switch. Get the power you need now.This Gigabit PoE Injector is designed as pure Power Sourcing Equipment (PSE). It ...

Imagine your brand new high-end WiFi Access Point finally running at full speed, without a distracting Power Supply ruining the aesthetics. This is exactly the freedom the Ubiquiti UACC-PoE+-2.5G gives you. It reliably supplies your powerful Network devices with power and data over a single cable, ensuring a clean, professional installation and maximum performance. This 2.5G PoE Adapter is the perfect solution to future-proof your Network and eliminate bottlenecks.This PoE Injector delive...

With a powerful 60 Watt output according to the IEEE 802.3bt standard, this PoE++ Adapter reliably powers even the most demanding UniFi devices. If you want to buy a Ubiquiti 60W PoE Injector to operate your G4 PTZ Camera or a U6 Enterprise Access Point, the U-PoE++ is the first choice. It delivers the necessary power exactly where you need it – even without an expensive PoE++ Switch.This Adapter is more than just a Power Supply; it's an intelligent solution for flexible Network installat...

Does your new UniFi Switch lack the power to supply all your UniFi Access Points and IP Cameras? Are you constantly hitting the limits of your PoE budget and forced to make compromises in your Network setup? The Ubiquiti UACC-ADAPTER-AC-210W puts an end to that. This Power Supply is the ultimate solution to unlock the maximum PoE budget and get the full performance out of your hardware. If you're looking to buy a Ubiquiti Ultra Switch Power Supply to upgrade your system, this is the official ...

The Ubiquiti INS-3AF-USB provides stable 5V USB power directly from your PoE Network cable. Forget inaccessible power outlets: now power your USB devices like IP Cameras, Raspberry Pis, or tablets anywhere you can reach with an Ethernet Cable. Ideal for realizing a USB Power Supply without an outlet or powering a Raspberry Pi via LAN.This compact adapter reliably converts the 802.3af PoE standard (48V) into 5V / 2A (10W), making it powerful enough for most modern USB devices. It is operat...

Equipped with robust ±15kV ESD/EMP protection, the Ubiquiti INS-3AF-I-G PoE converter makes your older 24V passive PoE devices future-proof. This adapter is the perfect solution to operate Ubiquiti 24V devices on a modern PoE Switch, reliably converting the 802.3af standard. It allows you to seamlessly integrate your existing infrastructure, such as airMAX ac Components, into a current Network with 48V PoE Switches, without needing expensive hardware upgrades.The Gigabit PoE converter ope...

With the Ubiquiti INS-3AF-O-G PoE converter, you can effortlessly operate your 24V passive PoE devices on any modern 48V 802.3af PoE Ethernet Switch. This compact adapter is the ultimate solution for integrating older hardware like airMAX ac Components or early UniFi Access Points into a standard-compliant Network infrastructure. Forget separate PoE Injectors / Power Supplies – this converter makes your setup cleaner, more efficient, and centrally controllable. It is the perfect 48V to 24V ou...

With an impressive ESD/EMP resilience of ± 24 kV and a switching capacity of 4 Gbps, the Ubiquiti NanoSwitch is the ideal PoE Passthrough Switch for weatherproof outdoor use. This compact Network distributor for pole mounting was developed to drastically reduce Cabling effort. With just a single incoming Ethernet Cable, power up to three additional 24V passive PoE-enabled devices such as IP Cameras or airMAX ac Components with Network and power.The N-SW itself is powered via passive 24V P...

Are you looking for a reliable and efficient solution to power your outdoor Antennas and Teltonika 4G / 5G Routers with power and data? Then the QuWireless QuPSU-GP241E PoE Injector is exactly what you need. This compact powerhouse eliminates cable clutter and complicated installations by delivering both over a single Ethernet Cable.With its Gigabit speed (1000 Mbps), the QuPSU-GP241E ensures that your modern 4G / 5G Routers can unleash their full potential – without bandwidth bottlenecks...