OEM

The turbocharger for your 2.4 GHz WiFi. The Sunhans AMP24-EU is a powerful WiFi booster that raises the transmission power of your router or device up to 1000mW (1 Watt). That is ten times the usual standard power! It is simply connected between your WiFi device (e.g., router, Access Point, or drone controller) and the Antenna. Since it works bi-directionally, it not only massively boosts the outgoing signal but also increases reception sensitivity for weak signals from distant devices. The r...

The perfect tool for H155 and RF240: Atecom HT-336-A4 Crimping Tool. If you want to assemble our Low Loss cables, this tool is the exact solution. The crimp inserts are tailor-made: use the 5.41mm slot for H155 cables and the 6.48mm slot for the slightly thicker RF240. Thanks to the integrated ratchet mechanism, the tool only opens when the connector is fully and securely crimped. This guarantees professional results with minimal attenuation – whether for Wi-Fi Antennas, mobile communications...

Optimized for frequencies up to 6 GHz, this RP-SMA connector is the professional choice for self-assembling a low-loss Antenna Cable. This high-quality 50 Ohm RP-SMA crimp connector for 5.4mm coaxial Cable is specially designed for types like H-155, RF-240, Aircell 5, or LMR-240, ensuring low-loss signal transmission.The crimp assembly of the outer conductor ensures an extremely tensile and mechanically stable connection, far superior to a pure solder connection. While the inner conductor...

Say goodbye to poor WiFi reception and cables that are too short. Imagine building your own Antenna cables – in the exact length you need, and with a quality that often surpasses pre-made cables. With this professional RP-SMA Female Connector for H-155 cables for crimping, you have full control over your connection. No more signal loss due to unnecessary adapters, but a clean, direct, and ultra-stable connection from your Antenna to your WiFi Router. This is the foundation for seamless stream...

Secure lossless signal transmission up to 6 GHz! This professional N-connector for H-155 cables for crimping is the first choice for demanding WiFi and radio applications where every decibel counts. It offers an extremely stable mechanical and electrically precise connection for your low-loss cables.Thanks to the precise 50-Ohm impedance and high-quality materials like the PTFE dielectric, signal reflections are minimized. The crimp assembly for the outer conductor guarantees fast and rep...

No more shaky connections and signal loss in wind and weather. Imagine assembling your Antenna cables with professional quality – quickly, securely, and absolutely reliably. With this N-Crimp-Socket, you create a rock-solid, weather-protected connection you can count on, whether for your WiFi project, 4G reception, or your radio application. Buying a perfect, weatherproof N-Socket for an outdoor Antenna has never been easier.This high-quality 50 Ohm N-Crimp-Socket is specially designed fo...

Put an end to frustrating signal dropouts caused by shaky connections! If your radio connection breaks down at the slightest vibration, you need a rock-solid solution. This professional TNC Connector for H-155, RF-5, RF-240 cables is the answer. Its screw lock ensures a mechanically unshakeable and electrically first-class connection you can always rely on.This high-quality TNC Crimp Connector is precisely manufactured for Coaxial cables with a diameter of approx. 5.4 mm. With a 50 Ohm im...

Designed for frequencies up to 6 GHz and a precise 50 Ohm impedance, this TNC jack is the professional choice for low-loss connections. If you need to assemble an Antenna Cable of type H-155, RF-5, or RF-240 and don't want to compromise on mechanical stability and signal quality, this crimp connector is exactly what you need. It creates an extremely robust, vibration-proof, and weatherproof connection.The crimp assembly ensures a reliable and strain-resistant connection between the Cable ...

Say goodbye to shaky connections and signal loss! With this high-quality RP-TNC connector for H-155 cables, you can create an absolutely reliable and mechanically rock-solid connection for your Antennas. Imagine your WiFi connection remaining stable even with vibrations or in demanding environments – that's exactly what you achieve with this professional Coaxial Connector. Perfect if you want to assemble your own low-loss Antenna cables and make no compromises on quality.This RP-TNC Coaxi...

Optimized for the frequency range up to 11 GHz, this professional RP-TNC jack offers an extremely stable and low-loss 50 Ohm connection for your projects. If you want to crimp an RP-TNC jack for H-155 cables, this is the perfect choice. It's specifically designed for the assembly of high-quality Coaxial cables like H-155, RF-5, or RF-240, ensuring superior signal integrity.Thanks to the precise crimp assembly and robust screw locking, you create a mechanically resilient and vibration-proo...

Designed for a frequency range up to 6 GHz, this FME connector far exceeds the standard and is your first choice for demanding RF applications. This high-quality FME crimp connector for RF-240 Antenna cables and H-155 is the professional solution for precisely assembling your Coaxial cables. It ensures low-loss and stable signal transmission for WiFi, mobile communication (4G / 5G Routers), or GPS.The combination of gold-plated contacts for minimal contact resistance and a Teflon dielectr...

Do you know the problem? You need to pull an Antenna Cable through a narrow bore in the body of your motorhome or through a crowded Cable duct, but the thick connector simply won't fit. This is exactly why the FME Jack for H-155, RF-5, and RF-240 cables was developed. Its extremely slim design makes installation a breeze and saves you frustration and extensive rework. With this Coaxial Connector, you can create a professional and permanently stable connection.This FME Jack is the perfect ...

Ensure absolutely stable and low-loss signal transmission: This professional SMA connector for H-155 cables provides a permanently reliable connection thanks to its robust crimp technology and precise screw cap. Ideal for demanding radio applications where every decibel counts.The connector is precisely designed for a 50-Ohm impedance to minimize signal reflections in your Network. It's the perfect choice for Coaxial cables like H-155, RF-5, RF-240, or LMR-240 with an outer diameter of up...

Direct benefit: Assemble your Antenna cables like a pro. This SMA Female Connector for H-155 Cable allows for extremely fast, solder-free, and mechanically stable assembly using the crimp method. Achieve low-loss connections for your WiFi or mobile radio project in no time, without relying on expensive pre-made cables.This high-quality Coaxial Connector is precisely manufactured for common 5.4 mm Low-Loss Antenna cables like H-155, RF-240, Aircell 5, or LMR-240. With an impedance of 50 Oh...

System Cable for site networking: EKU OutLan Cat.7 S/FTP PE (500m). This highly specialized outdoor Cable was developed for demanding campus and industrial Cabling. It combines the electrical properties of a premium Cat.7 Cable (1000 MHz, 10 Gbps) with the mechanical resilience of a ground cable. The UV-stable PE jacket allows for direct burial as well as use in unprotected outdoor areas. With a coupling attenuation of 85 dB (Type 1) and segregation class "d", it offers maximum protection aga...

Antenna mounting without drilling, directly on the window frame! This innovative bracket is simply clamped into the frame of your plastic (uPVC) window. The highlight: Your window can still be opened, closed, and tilted normally. Since the bracket can only be removed when the window is open, your Antenna is automatically secured against theft. Made of weatherproof aluminum, it supports Antennas up to 3 kg in weight and 70 cm in length. The ideal solution for rented apartments, listed facades,...

System Cable for site networking: EKU OutLan Cat.7 S/FTP PE (1000m). This highly specialized outdoor Cable was developed for demanding campus and industrial Cabling. It combines the electrical properties of a premium Cat.7 Cable (1000 MHz, 10 Gbps) with the mechanical resilience of a ground cable. The UV-stable PE jacket allows for direct burial as well as use in unprotected outdoor areas. With a coupling attenuation of 85 dB (Type 1) and segregation class "d", it offers maximum protection ag...

The clever solution for your tiled roof! With this aluminum roof mount, you can install light Antennas (up to 2 kg) quickly and securely without complex mast constructions. The bracket is specially designed to simply slide between two roof tiles and be fixed in place. This makes assembly and disassembly a breeze. Made of weatherproof aluminum, it does not rust and is perfect for LTE, 5G, WiFi, or LoRaWAN Antennas outdoors.HighlightsEasy Installation: Simply slides between the roof tiles a...

The perfect solution for renters! With this aluminum window sill mount, you can install your Antenna securely and stably without drilling a single hole. The bracket is simply slipped onto existing stone window sills (up to 6 cm thick) and screwed tight. This is ideal for LTE, 5G, WiFi, or Helium Antennas weighing up to 2 kg. Made of weatherproof aluminum, the construction is rust-free and durable. If you move out, it can be removed without leaving any residue in seconds.HighlightsNo Drill...

Are you looking for a quick and easy solution to power your devices without having to reach for a soldering iron? Our DC Barrel Jack to Screw Terminal Adapter is exactly what you need! This practical adapter with dimensions of 5.5 x 2.1 mm allows for solderless installation and is ideal for connecting open Cable ends to power supplies, LED lighting, or surveillance cameras. Perfect for hobbyists, quick repairs, or temporary installations.With this adapter, you are super flexible: it is co...

The flexible clamp solution for ALFA Tube and cameras. This robust clamp mount is the perfect mounting base for all devices with a standard 1/4 inch tripod thread. Originally developed for the popular ALFA Network Tube series (WiFi Camp Pro), it holds Wi-Fi receivers securely to tent poles, ladders, mirrors, or railings. The highlight is the universal 1/4 inch thread: This instantly transforms the clamp into a mount for action cams, light DSLR cameras, webcams, or small directional Antennas. ...

Extreme holding power thanks to triple system. If you want to play it safe, this XXL suction cup mount is the first choice. Equipped with three synchronized vacuum cups, it offers extremely high holding power on all smooth surfaces like car paint, glass, or GRP. It was specifically developed for the ALFA Network Tube series and WiFi Camp Pro systems to guarantee a rock-solid fit even in stronger winds or while driving (e.g., for cameras). The central 1/4 inch thread makes it universally compa...

Say goodbye to choppy video calls and slow downloads on the go or in remote locations. Imagine always having a stable internet connection, whether in your motorhome, truck, or outdoor IoT system. This weatherproof 4G MIMO Magnet Antenna was specifically designed to provide you with reliable reception where your router's internal Antennas fall short. It's the straightforward plug-and-play solution for a strong and stable 4G signal.The JCG305LM is a sophisticated 4G Outdoor Antenna for Rout...

Electronics outdoors? No problem! This universal IP65 installation box reliably protects your technology from rain, splashing water, dust, and dirt. The robust plastic housing features an integrated gasket and is securely closed with four screws. With internal dimensions of approx. 16.5 x 14.2 x 9 cm, it offers enough space for PCBs, small routers, switches, or wiring in the garden, on a boat, or in industrial settings.HighlightsIP65 Rating: Complete protection against contact, dust, and ...

More space for your outdoor projects! This large-format IP65 Enclosure (24.1 x 18 cm) offers enough room for routers, larger control boards, or extensive wiring. It reliably protects sensitive electronics from rain, dust, and splashing water. Thanks to its robust construction and integrated seal, it is the ideal choice for demanding installations in the garden, industry, or on masts.HighlightsGenerous Size: With over 23 cm internal width, larger router boards, switches, or battery packs f...

When standard Enclosures are too small, the SCAME SCABOX 685.011 steps in. This massive industrial Enclosure (46 x 38 x 13 cm) offers ample space for routers, switches, controls, or complex distribution systems. Made of high-quality, halogen-free thermoplastic, it is shock-resistant, UV-resistant, and self-extinguishing in case of fire. IP55 protection and quick-release screws make it the top choice for professional indoor and outdoor installations.HighlightsXXL Format: With a 460 x 380 m...

The complete solution for your mast installation! This large IP65 outdoor Enclosure (24 x 18 cm) doesn't come alone: It includes a matching mast mount (bracket + clamp), a PG16 Cable gland, and mounting pads. This gives you everything you need to immediately mount routers, access points, or sensors weather-proofed on masts, railings, or pipes – without having to search for Accessories.HighlightsAll-in-One: Enclosure + Mast Clamp + Bracket + Cable Gland + Mounting Pads. Unpack and get star...

Optimize your mobile connectivity with the JCG605LM4 LTE Vehicle Multi-WAN Antenna. This robust omnidirectional Antenna is specifically designed for demanding mobile environments, offering you superior and stable LTE connectivity. Thanks to its 4x4 MIMO configuration, you benefit from increased bandwidth and improved signal stability, even under adverse conditions. It's the ideal solution for anyone relying on a reliable internet connection on the go, whether for field Service, RVs, or public...

Do you need an Antenna that keeps up with you, no matter where your journey takes you? The JCB605LM4 is your ultimate solution for reliable connectivity and precise positioning in any vehicle.This robust Antenna combines 4x4 MIMO 4G for lightning-fast data rates with integrated GPS and GLONASS for exact tracking. With its IP67 design, it withstands the toughest conditions and is ideal for M2M applications and fleet management.Highlights 4x4 MIMO 4G: Enables two parallel 4G connection...

This is a schrink tube has a diameter of 9.5mm, and a shrink ratio of 2:1. It will be supplied in 1m length.

This is a schrink tube has a diameter of 9,5mm, and a shrink ratio of 4:1. It will be supplied in 1m length. - In addition, this schrink tube has an adhesive inlay which is ativivated when heated.