WiFi Antenna Cables

The pro cable for Helium miners and Wi-Fi networks. The CNT-400 antenna cable is an extremely low-loss high-end coaxial cable designed specifically for applications where signal strength is critical. Technically, it meets the standards of well-known cable types such as LMR-400 or HDF-400. It comes pre-assembled with an N-Male connector (for professional outdoor antennas) and an RP-SMA Male connector (for Helium miners and Wi-Fi access points). Thanks to the UV and moisture-resistant jacket, i...

Better Wi-Fi reception through optimal positioning. This 4x4 MIMO magnetic base is the ideal solution for extending Wi-Fi antennas from the back of your PC, router, or control cabinet. It relocates four antenna connections by 1.5 meters to a better location. Thanks to the four RP-SMA ports, it is perfectly suited for modern high-end routers (Wi-Fi 6 / 4x4 MIMO) or PCIe Wi-Fi cards. The strong magnetic base adheres securely to PC cases, server racks, or the interior of vehicles and campers, wh...

Signal tuning for 3-antenna systems. This 3x3 MIMO magnetic base gets your Wi-Fi antennas out of the signal shadow. It is specifically designed for routers, access points, and PCI-E cards that have three antenna ports. PCs are often located under desks or routers in cabinets – places that massively block the Wi-Fi signal. With this stand, you can relocate your existing antennas by 1.5 meters to an optimal position (e.g., on the desk or PC case). The strong magnetic base ensures a secure hold ...

The JARFT J2250-RPSMA 4x4 MIMO WLAN window feed-through provides an excellent solution for connecting a 4x4 MIMO WLAN outdoor antenna to your indoor WLAN router or access point without the need for drilling. At 50 cm long and featuring an ultra-thin design, this window cable can easily be placed through or laid inside a window frame without causing any damage to the frame, window, or locking mechanism.Equipped with four RP-SMA plugs and four RP-SMA sockets, the feed-through ensures a st...

The flexible standard for better Wi-Fi. This 2x2 MIMO magnetic base is the universal solution for almost all common Wi-Fi devices. Whether it's a gaming PC, home office computer, or LTE router (with RP-SMA adapter): If the antennas are hidden directly behind the device under the desk or in a cupboard, the connection suffers. With this stand, you can relocate your two antennas by 1.5 meters to a free spot with better reception. The strong magnetic base adheres securely to the PC case, filing c...

No more weak reception. The CNT-400 is our most powerful coaxial antenna cable for long distances. With a diameter of approx. 1 cm, it is the "big brother" of standard cables and ensures that your LTE, 5G, or Wi-Fi signal arrives powerfully at the router even after 20 or 30 meters. It corresponds in performance and dimensions to the well-known cable types H1000, MRC400, or LMR-400. The robust, weatherproof jacket makes it ideal for permanent installation outside on the mast. We build your des...

The upgrade for your Wi-Fi range: Our RF-240 coaxial antenna cable connects your router directly to a powerful WiFi outdoor antenna. It comes pre-assembled with an N-Male connector (for the antenna) and an RP-SMA Male connector (for the router). Thanks to double shielding and a high-quality solid copper conductor, this "Low Loss" cable performs significantly better than standard cables. The UV-stable PE jacket allows for permanent outdoor installation. Available in fixed lengths from 1m to 10...

Too short is a thing of the past: With this RF-240 coaxial antenna cable, you can easily extend your existing Wi-Fi cable or antenna connection. It features an RP-SMA Male connector on one side and an RP-SMA Female connector on the other – fitting almost all standard Wi-Fi routers and Helium miners. Unlike thin standard extensions, this high-quality "Low Loss" cable is designed for low attenuation, ensuring your signal remains strong even after extension. Thanks to its weatherproof jacket, it...

The JARFT J2250-RPSMA 2x2 MIMO WLAN window feed-through is the ideal solution for connecting a 2x2 MIMO WLAN outdoor antenna to your indoor WLAN router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window cable can easily be routed through a window frame or simply laid inside it without damaging or affecting the frame, the window, or the locking mechanism.Equipped with two RP-SMA plugs and two RP-SMA sockets, the window feed-through ...

If you want to get the maximum out of your wireless connection, our RF-240 Coaxial Antenna Cable is the right choice. This high-performance coaxial cable is perfect for applications up to 6 GHz. Whether as a WiFi antenna cable for 2.4 GHz and 5 GHz networks, as a high-quality feed line for your 5G or LTE antenna, or for your IoT or M2M project. Configure your individual coaxial antenna cable now in our configurator. We then manufacture it made-to-order just for you!HighlightsHigh-End Ante...

Our H-155 antenna cable is your universal solution for high-frequency connections. Whether as a WiFi antenna cable, for your LoRaWAN gateway, or as an 4G extensionc cable: This low-loss cable reliably transmits signals up to 3 GHz. Use our configurator to order your individual antenna cable with the right connectors in your desired length.HighlightsVersatile Antenna Cable: Optimized for frequencies up to 3 GHz - ideal as WiFi (2.4 GHz), for LoRaWAN, GSM, UMTS, and LTE antenna cable. Weath...

This ultra-thin window cable/window feedthrough is 40 cm long and equipped with an RP-SMA male plug and an RP-SMA female socket. This makes the cable ideal for routing the antenna cable of a WiFi antenna through a window. Simply place the flat cable in the frame with the window open and then carefully close the window.

High quality coaxial pigtail with the connector combination U.FL plug to N female socket. The pigtail has a length of 25cm and is made with RG-178 cable. The socket is supplied with a lock nut and washer and can therefore be used as a bulkhead socket.

High-quality assembled coaxial pigtail with the connector combination U.FL plug to N male plug. The low loss pigtail has a length of 25cm and is made on RG-178 cable.

The bridge from board to antenna. This high-quality coaxial pigtail connects internal radio modules (with U.FL / IPEX connector) to external Wi-Fi antennas (RP-SMA). With a length of 25 cm, it offers enough flexibility for clean routing inside PC cases, routers, or industrial boxes. The cable is made of robust RG-178, providing better shielding and durability than standard wires. The RP-SMA jack is designed as a "bulkhead": Thanks to the included nut and washer, you can screw it firmly into a...