U-Fiber / SFP

Overcome PoE and copper wire limitations with the next-generation FiberPoE, model F-POE-G2. The FiberPoE Gen2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection.

The Ubiquiti UACC-CM-RJ45-1 is a 1Gbps SFP / RJ45 transceiver module and particularly suitable for the Ubiquiti UniFiSwitch, EdgeSwitches and EdgePoint series. By using this SFP module, a regular copper cable can be used instead of an optical fiber cable. Distances of up to 100m are possible for the transmission.

Ubiquiti UF-RJ45-10G transceiver SFP+ / RJ45 module offers a data throughput of 10GBit at distances up to 30 meters. The module is suitable for the UniFi Switch, Edge Switch and Edge Point series with SFP+ ports. By using this SFP module, a regular copper cable can be used instead of an optical fiber cable. Distances of up to 30m are possible with a CAT6A cable.

Ubiquiti Networks UACC-OM-SM-1G is a 1Gbps LC / SFP transceiver pair and is particularly suited for the UniFi switches, edge switches and edge point series. A maximum cable length up to a distance of 3km is possible. A set of 2pcs (UACC-OM-SM-1G-S-2) is supplied.

Ubiquiti Networks UACC-OM-SM-1G is a 1Gbps LC / SFP transceiver and is particularly suited for the UniFi switches, edge switches and edge point series. A maximum cable length up to a distance of 3km is possible. The set of 20pcs (UACC-OM-SM-1G-S-20) is supplied.

Ubiquiti UACC-OM-SM-10G is a 10Gbps Dual LC / SFP+ transceiver and is particularly suited for the UniFiSwitch, EdgeSwitch and EdgePoint series. Maximum cable length up to a distance of 10km are possible. The set of 2pcs (UACC-OM-SM-10G-S-2) will be delivered.

Ubiquiti UACC-OM-SM-10G is a 10Gbps Dual LC / SFP+ transceiver and is particularly suited for the UniFiSwitch, EdgeSwitch and EdgePoint series. Maximum cable length up to a distance of 10km are possible. The set of 20pcs (UACC-OM-SM-10G-S-20) will be delivered.

Ubiquiti Networks UACC-OM-MM-1G is a 1GBit multimode SFP transceiver and is particularly suitable for the UniFi Switch, Edge Switch and Edge Point series. This module allows transmissions with distances of up to 550m. The set of 2pcs (UACC-OM-MM-1G-D-2) is supplied.

Ubiquiti UACC-OM-MM-1G is a 1GBit multimode SFP transceiver and is particularly suitable for the UniFi Switch, Edge Switch and Edge Point series. This module allows transmissions with distances of up to 550m. The set of 20pcs (UACC-OM-MM-1G-D-20) is supplied.

Ubiquiti Networks UACC-OM-MM-10G is a 10GBit multimode SFP+ transceiver and is especially suitable for the UniFi Switch, Edge Switch and Edge Point series. Use the module for multimode connections that extend beyond the 100 meter limitation of Ethernet cabling up to 300m and speeds up to 10 Gbps. The set of 2 modules (UACC-OM-MM-10G-D-2) is supplied.

Ubiquiti Networks UACC-OM-MM-10G is a 10GBit multimode SFP+ transceiver and is especially suitable for the UniFi Switch, Edge Switch and Edge Point series. Use the module for multimode connections that extend beyond the 100 meter limitation of Ethernet cabling up to 300m and speeds up to 10 Gbps. A set of 20 modules (UACC-OM-MM-10G-D-20) is supplied.