Ethernet Accessories

Patch cable too short? No problem! With this high-quality LogiLink Network Coupler (RJ45 Joiner), you can connect two network cables in seconds and extend your line length. The adapter is fully shielded and Cat.6A certified, supporting full speeds of up to 10 Gbps – without signal loss. Thanks to its compact design and robust metal housing, it is ideal for professional use in the office or at home.HighlightsEasy Extension: Connects two patch cables (RJ45 plugs) into one long cable. RJ45 F...

Extend your network outdoors – absolutely waterproof! The LogiLink NP0086 is an IP68 certified outdoor cable connector for RJ45 patch cables. It allows you to connect two network cables quickly and securely without fear of wetness or dirt. Thanks to the robust housing and screw-on seals, the connection is perfectly protected against rain, snow, and UV radiation. Technically, you are on the safe side: The connector supports the Cat.6A standard and thus transmits full 10 Gigabit (10,000 Mbps) a...

The lifesaver for cut cables! The LogiLink NP0087 is an IP68 waterproof outdoor cable connector. Unlike simple couplers, it is designed to connect two installation cables directly to each other – completely without plugs. Thanks to its flexible intake (AWG 22-26), it is suitable for common Cat.6A and Cat.7 installation cables as well as solid Cat.8 lines. It repairs or extends your line waterproof and without loss of performance. With full shielding and support for 10 Gigabit Ethernet (and mo...

The airbag for your network port! The LogiLink NP0079N is an ingenious device protection adapter with a "Break-Away" function. The principle is simple but lifesaving for your hardware: If someone trips over the connected LAN cable, the adapter doesn't pull the laptop off the table or damage the socket. Instead, the connection disconnects cleanly at the predetermined breaking point as soon as a pulling force of approx. 10 Newton is exceeded. Perfect for mobile IT carts in hospitals, laptops in...

Cable too short or damaged while drilling? The BIGtec CAT.7 LSA Connection Module is the professional solution for extending or repairing network cables without having to pull a completely new line. Unlike simple couplers, the wires are securely connected via LSA punch-down terminals. The metallized housing ensures continuous shielding and lossless signal transmission up to 10 Gbps.HighlightsThe Cable Saver: Ideal for repairing damaged cables or extending them if the cable in the wall tur...

The must-have tool for every network installation! With this professional LSA Punch Down Tool, you can wire network sockets, patch panels, and distribution blocks in record time. The clever mechanism performs two steps at once: It presses the wire securely into the LSA terminal and simultaneously cuts off the excess wire cleanly. Includes a fold-out pull hook and unlocking blade for corrections.HighlightsPunch & Cut: Connects the wire and trims the excess length in a single operation (cut...

Trust is good, checking is better! With the LogiLink WZ0015 Cable Tester, you can check your self-made patch cables or installed network lines for errors in seconds. The device automatically tests all wires (1-8) as well as the shielding (Ground) for continuity, short circuits, or miswiring. Thanks to the detachable remote unit, you can also test permanently installed cables whose ends are in different rooms. Suitable for RJ45 (Network) and RJ11/RJ12 (Telephone).HighlightsError Finder: Re...

The essential tool for your network! The LogiLink WZ0003 is a professional crimping tool that allows you to securely and permanently mount network and telephone plugs onto cables. Thanks to the integrated cutting and stripping function, you have everything in one hand: shorten cables, remove the jacket, and crimp the plug. The high-quality ratchet mechanism ensures perfect contact pressure every time, leaving no chance for loose connections. It supports standard RJ45 (Network) and RJ11/RJ12 (...

Tool-free assembly at the highest level! The LogiLink MP0040 from the high-quality PrimeLine series is a field termination Cat.6a RJ45 plug for professionals. It allows the assembly of network cables without crimping pliers and is – unlike many standard plugs – reusable. The fully shielded zinc die-cast housing and the contacts plated with 50µ gold guarantee maximum performance for 10 Gigabit Ethernet and PoE++ applications. It is flexibly applicable for solid and stranded wires (AWG 23-26) a...

100 x CAT5e RJ45 Connectors for assembly of cables according to EIA/TIA 568A/B. Gold plated contacts improve the conductivity of the plug. The installation of the modular plug is quick and easy with an appropriate ratchet crimping tool.

This shielded modular RJ45 connectors from LogiLink are used to assemble round cables according to EIA/TIA 568A/B. Gold pplated pinf improve the conductivity.

The bend protection from LogiLink protects your RJ45 cable connector from damage and contamination. It is suitable for all shielded and unshielded 8P8C modular plug - The package contains 100pcs in gray color.

The bend protection from LogiLink protects your RJ45 cable connector from damage and contamination. It is suitable for all shielded and unshielded 8P8C modular plug. The package contains 100pcs in black color.

Weatherproof, IP67 rated CAT5e RJ-45 Ethernet plastic cable feed / gland with integrated O ring, RJ-45 socket and 25cm cable with RJ45 plug. The cable gland is particularly suitable for use on weatherproof enclosures in outdoor areas.

This weatherproof (IP67 classified) RJ-45 ethernet cable feedthrough made of plastic with an integrated sealing ring is suited for use with outdoor enclosures / boxes. It has RJ-45 socket and a LSA terminal block.

10pcs Ubiquiti TC-CON RJ45 connectors: The plugs fit perfectly with the Ubiquiti Ethernet cable TOUGHCable PRO and CARRIER and can be put on with a regular crimping tool.

Ubiquiti TOUGHCable RJ45 connectors / TC-CON fit to Ubiquiti TOUGHCable PRO and CARRIER (Level 1, Level 2) and can be applied with regular RJ45 crimping tool.

Ubiquiti TOUGHCable Grounded Connectors are suitable for TOUGHCable PRO and CARRIER (Level 1 and 2). TOUGHCable Connectors protects your equipment against ESD attacks and Ethernet hardware damage while allowing rapid field deployment without soldering.

Ubiquiti TOUGHCable Grounded Connectors are suitable for TOUGHCable PRO and CARRIER (Level 1 and 2). TOUGHCable Connectors protects your equipment against ESD attacks and Ethernet hardware damage while allowing rapid field deployment without soldering.