4G Cat 12 Performance for Critical Applications
The Teltonika RUTX14 is a powerhouse. Thanks to support for 4G Category 12 and 3x Carrier Aggregation (3CA), it bundles frequency bands to achieve theoretical speeds of up to 600 Mbps. This is ideal for bandwidth-intensive tasks such as 4K video streaming, fast data transfers from surveillance cameras, or connecting entire company sites where no wired alternative is available.
Maximum Reliability through Dual SIM & Failover
An uninterrupted connection is not an option, but a necessity. The RUTX14 uses its two SIM card slots for intelligent failover management. You can define precise rules for when the router should switch to the second SIM card: in case of weak signal, reaching a data limit, roaming, or even a connection error. This keeps your Network online, no matter what happens. This makes it the perfect choice for anyone who relies on a stable internet connection.
Built for the Harshest Conditions: Industry & Vehicles
Where consumer routers give up, the RUTX14 just begins. Its full aluminum housing not only protects the electronics but also serves as a passive heat sink. The extreme operating temperature range of -40 °C to 75 °C and the flexible input voltage of 9 to 50 VDC make it the ideal companion in control cabinets, vehicles, or outdoor Enclosures. It is the perfect robust 4G Routers for vehicles such as motorhomes, trucks, or emergency vehicles. For mobile use, we recommend suitable Vehicle Antennas - 4G, 5G, WiFi to get the most out of the 4x4 MIMO.
RutOS: The Command Center for Professional Networks
The true strength of the RUTX14 lies in its software. RutOS, based on the proven OpenWrt, offers a wealth of configuration options that go far beyond the usual. Set up complex VPN tunnels with OpenVPN, IPsec, WireGuard, or ZeroTier, segment your Network with VLANs, or use dynamic routing protocols like BGP and OSPF. Via the Teltonika Remote Management System (RMS), you can also centrally manage and monitor entire fleets of routers. This router is a prime example of the performance of modern Teltonika 4G / 5G Routers.
Strengths & Notes at a Glance
- Pro: Extremely high mobile speed thanks to 4G Cat 12 and 3x Carrier Aggregation.
- Pro: Highly developed Dual-SIM failover functions for maximum redundancy and availability.
- Pro: Extremely robust design with aluminum housing and wide temperature range for industrial and vehicle use.
- Pro: Powerful RutOS with countless professional Network and VPN functions.
- Pro: Comprehensive interface equipment including 5x Gigabit Ethernet, 4x4 MIMO 4G, and GNSS.
- Note: Configuring the diverse functions of RutOS requires basic network knowledge.
- Note: Supports only passive PoE (Mode B, 9-50V) on the LAN1 port, not compatible with IEEE 802.3af/at standards.
Specifications & Features
| Manufacturer: | Teltonika |
| Model: | RUTX14 |
| EAN: | 4779027312965 |
| Device Classification: | Industrial 4G Mobile Router |
| CPU: | Qualcomm, Quad-Core ARM Cortex A7, 717 MHz |
| RAM: | 256 MB DDR3 |
| Flash Memory: | 256 MB |
| Mobile Module: | 4G 4G Advanced (4G-A), Category 12 (Cat 12) |
| Max. Data Rate (Download): | Up to 600 Mbps |
| Max. Data Rate (Upload): | Up to 150 Mbps |
| Carrier Aggregation: | Yes, 3x Carrier Aggregation (3CA) |
| Supported 4G Bands: | B1, B3, B5, B7, B8, B20, B28, B32(Rx), B38, B40, B41 |
| Supported 3G Bands: | B1, B3, B5, B8 |
| SIM Slots: | 2 x Mini SIM (2FF) with Auto-Failover |
| WiFi Standard: | IEEE 802.11b/g/n/ac Wave 2 (Wi-Fi 5) |
| WiFi Frequency Bands: | 2.4 GHz & 5 GHz (Dual-Band) |
| Max. WiFi Data Rate: | Up to 867 Mbps |
| WiFi MIMO: | 2x2 MU-MIMO |
| WiFi Security: | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK |
| Max. WiFi Clients: | Up to 150 |
| Bluetooth: | Version 4.0 (Low Energy) |
| Ethernet Ports: | 5 x 10/100/1000 Mbps (1x WAN, 4x LAN) |
| Antenna Connectors 4G: | 4 x SMA (4x4 MIMO) |
| Antenna Connectors WiFi: | 2 x RP-SMA |
| Antenna Connector BT: | 1 x RP-SMA |
| Antenna Connector GNSS: | 1 x SMA |
| USB Port: | 1 x USB-A 2.0 |
| Digital I/O: | 1 x Input, 1 x Output (on power connector) |
| VPN Support: | OpenVPN, IPsec, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, ZeroTier, WireGuard |
| Operating System: | RutOS (based on OpenWrt) |
| Housing: | Full Aluminum |
| Dimensions (W x H x D): | 132 x 44 x 95 mm |
| Weight: | 515 g |
| Operating Temperature: | -40 °C to 75 °C |
| Input Voltage: | 9 – 50 VDC (4-Pin Socket) |
| Power Consumption: | < 4 W (Idle), < 22 W (Maximum) |
| Passive PoE: | Yes, Mode B (9-50 VDC) via LAN1 port |
Scope of Delivery
| 1 x Teltonika RUTX14 Router |
| 4 x 4G Antennas (3 dBi) |
| 2 x WiFi Antennas (3 dBi) |
| 1 x Bluetooth Antenna (2.5 dBi) |
| 1 x GNSS Antenna |
| 1 x 4-Pin Power Supply |
| 1 x Ethernet Cable (1.5 m) |
| 1 x SIM Adapter Kit |
| 1 x Quick Start Guide |
Frequently Asked Questions (FAQ)
What is the maximum speed of the Teltonika RUTX14?
The RUTX14 supports 4G Category 12 and achieves theoretical maximum speeds of up to 600 Megabits per second (Mbps) for download and 150 Mbps for upload. The actual speed heavily depends on the network coverage and utilization of the mobile provider.
Can the RUTX14 use two SIM cards simultaneously?
No, it cannot use both SIM cards simultaneously for bundled speed. It uses the dual-SIM function for redundancy (failover). If the primary SIM card's connection fails or reaches a data limit, the router automatically switches to the second SIM card.
Is the Teltonika RUTX14 suitable for use in vehicles (e.g., camper van, truck)?
Yes, absolutely. Its robust aluminum casing, wide operating temperature range (-40 °C to 75 °C), and flexible Power Supply (9-50 VDC) make it ideal for mobile use in vehicles. The GNSS functionality is an additional advantage for fleet management.
What is RutOS and why is it important?
RutOS is the router's operating system, based on OpenWrt (Linux). It offers advanced security and connectivity features such as a variety of VPN services, a granular firewall, and the ability for remote management via the Teltonika Remote Management System (RMS).
Can I power the RUTX14 via a standard PoE switch?
No, the RUTX14 is not compatible with IEEE 802.3af/at standards. It requires a passive PoE Power Supply with 9-50 Volts on the LAN1 port. Using a standard PoE switch can damage the router.
Which antennas are needed for the RUTX14?
The router comes with a complete set of antennas: four 4G antennas, two Wi-Fi antennas, one Bluetooth, and one GNSS antenna. For optimal performance, especially in vehicles, external roof antennas can be used.
Homepage: https://teltonika-iot-group.com/
