Mounting & Accessories

The compact solution for your antenna setup: The BATLINK MAU10 mast adapter instantly turns any antenna base with a standard 1 inch BSF thread (14 tpi) into a universal pole mount. With its short length of 10 cm, it is ideal when you want to keep the leverage low or when vertical space is limited. The diameter of 3.8 cm offers the perfect mounting point for antennas attached via pole clamps or U-bolts. Simply screw it onto your existing BATLINK mounting system, and you have an extremely robus...

The ultimate problem solver for your antenna setup: The BATLINK MAU20 mast adapter turns any antenna base with a standard 1 inch BSF thread (14 tpi) into a universal pole mount. It is 20 cm long and, with a diameter of 3.8 cm, offers the perfect mounting point for antennas that are traditionally attached via pole clamps or U-bolts. Simply screw it onto your existing BATLINK mounting system (e.g., tilt mount or suction cup), and you instantly have an extremely robust, weatherproof nylon pole f...

The ultimate fixed mount for harsh conditions: The BATLINK 3DK tilt joint mount is an extremely robust solution for permanently screwing antennas onto roofs, decks, or masts. Thanks to the two flexible 180° joints (3D tilt system), the antenna can be aligned perfectly vertical on any slanted surface. The mount is made of a high-strength special plastic that is not only completely wind and weatherproof but also effortlessly defies aggressive seawater. Equipped with a standardized 1 inch BSF ma...

Rock-solid hold without drilling: The BATLINK 3D2SL double suction cup mount is the premium solution for mounting antennas on smooth surfaces such as RV roofs, boats, or glass panes. With two massive 12 cm suction cups and a whopping load capacity of 100 kg (2x 50 kg), it holds absolutely securely even in wind and weather. The integrated 3D tilt joint allows you to align the antenna perfectly (2x 180°), even if the surface is slanted. Brilliant feature: The standardized 1" x 14 BSF thread has...

The TravelConnector 3DKM is a robust plastic 3D articulated tilt holder with magnetic feet, suitable for all TravelConnector and other systems with corresponding threading (1 inch UNS, 14 tpi). The 3DKM tilt holder securely attaches to any magnetic surface using four magnets. The rubber casing not only protects against scratches but also enhances load-bearing capacity in shear direction and ensures slip resistance. Even aggressive seawater poses no problem for the 3DKM.

The TravelConnector 2DRH is a robust plastic joint tilt mount with a 180° tilting joint and 1-inch UNS thread (14 tpi). The 2DRH is absolutely wind and weatherproof and is compatible with all TravelConnector and other antenna systems with corresponding threading. The tilt mount is secured to a railing (22-25mm diameter) using two screws. Even aggressive seawater poses no problem for the 2DRH.

The MH1 is a robust mast mount made of V4A stainless steel with 1" UNS (14 tpi) threading. It is secured to a mast (up to 50mm in diameter) using two pipe clamps. Even aggressive seawater poses no problem for the mounting system. The MH1 is compatible with all TravelConnector and other antenna systems with corresponding threading.

TravelConnector SMH1 from BATLINK is a robust antenna holder for sailing masts made of stainless steel. The system fits all TravelConnector and universally other antenna systems with a corresponding 1 inch UNS thread. The SMH1 is screwed directly onto the mast.The antenna system is screwed onto the SMH1 mounting system using the 1 inch UNS thread (14 tpi). The stainless steel is absolutely wind and weatherproof (marine grade) and can withstand even extreme weather conditions. Even aggressiv...

The TravelConnector KM41-GLUE is an extremely solid mounting plate made of V4A stainless steel. Designed for adhesive attachment to vehicle/motorhome roofs, this mounting plate serves as a base for the TravelConnector 2DK/3DK or ZH4A1 mounting system (see example photos). The plate is intended for adhesive application - adhesive is not included in the delivery.

The perfect link for your 5G setup: The BATLINK ZH4A1 mounting kit consists of two extremely robust brackets made of seawater-resistant V4A (316) stainless steel. It is specially designed to connect your BATLINK MAO5GV1 or MAO5GV2 5G antenna with the proven BATLINK base mounts (such as the 3DK, 2DK, MH1, or the KM41-GLUE adhesive base). This clever adapter system opens up limitless mounting possibilities – whether you want to install your antenna flexibly on the RV roof, the boat deck, or fir...

TravelConnector DDK2X is a weatherproof dual coaxial antenna cable feedthrough with PG11 screw connection. Two cables with a thickness between 5mm and 10mm can be fed through. The cable feedthrough is ideal for use on vehicles, yachts or other surfaces. The DDK2X is designed to be glued to the vehicle roof or corresponding surface. Adhesive is not included in the scope of delivery. The UV-resistant IP68 housing makes the feedthrough extremely robust and durable.

Internet for yachts, campers, and vehicles! The BATLINK NKAD68 is a professional Ethernet cable feed-through specially developed for mounting on smooth surfaces. Instead of drilling and screwing into your roof or deck, this housing is simply securely glued on. The centerpiece is the waterproof bayonet connector: It allows you to safely route network cables from inside to outside – and disconnect them quickly if necessary. The IP68 housing is UV-resistant, extremely robust, and withstands even...

The BATLINK OCUSB2 is a weatherproof USB 3.0 cable feed-through with an integrated 2-meter connection cable. It was specially developed for vehicles, boats, and yachts where drilling holes for screws is not an option. The robust, UV-resistant housing is prepared for adhesive mounting on the roof or outer wall. Thanks to the IP65 protection class and the secure "Click" locking mechanism, the connection is protected from splashing water and dust, while data is transferred at a rapid 5 Gbps.Hi...

TravelConnector OCUSB1 is a weatherproof USB 3.0 cable bushing with 1m cable length. The cable bushing is ideal for use on vehicles or boats. The bushing is extremely robust and durable thanks to the UV-resistant IP65 housing. The quick and easy-to-use "click" closure ensures a reliable, secure and stable connection with a high transfer rate of up to 5 GBit. The OCUSB1 is designed to be glued to the vehicle roof. A corresponding adhesive is not included in the scope of delivery.

Power your devices directly from your car socket. With this 1.5m adapter cable, you can easily connect routers, screens, or cameras to the cigarette lighter socket (12V outlet). Equipped with the standardized 5.5 x 2.1 mm barrel plug, it fits almost all common 12V small devices. The ideal solution for rental campers, cars, trucks, and boats – no tools or installation required.HighlightsPlug & Play: Just plug it into the cigarette lighter and get power instantly. No installation needed. Pe...