Never Drill Again: Your Antenna Mounting Revolutionized
Forget drilling machines and permanent damage to your beloved motorhome or boat! With the BATLINK 3D2SL Double Suction Cup Mount, you can mount your Antennas in no time – completely without holes. Two premium suction cups, each with a diameter of 12 cm, firmly adhere to smooth surfaces like glass, metal, or GRP, offering an impressive load capacity of up to 100 kg. This is the perfect solution for anyone who values flexible and residue-free temporary installation, whether for your WLAN Antennas or an 4G outdoor Antenna.
Perfection at Every Angle: The 3D Tilt Joint
Is your vehicle roof rarely perfectly flat? No problem! The BATLINK 3D2SL is equipped with a highly flexible 3D tilt joint that offers you two swivel ranges of 180° each. This allows you to precisely align your Antennas and easily compensate for unevenness. Whether on the sloped roof of your panel van or on the side wall of your yacht – your boat Antenna mount or motorhome antenna is always optimally positioned for the best reception. This suction cup mount gives you the freedom you need.
Cleverly Designed: The 1 Inch 14 BSF Thread with Cable Cut-out
Do you know the problem? You have an Antenna Cable with an already mounted connector that doesn't fit through the threaded hole. End of story! The standardized 1 inch 14 BSF thread of the BATLINK 3D2SL features an ingenious lateral cable cut-out. This means for you: You simply insert the cable comfortably from the side and screw your antenna firmly. No cutting, no re-assembly – this saves you valuable time and nerves. A real relief for your antenna mounting Accessories!
Robust and Ready for Any Adventure: UV-Resistant and Durable
Whether blazing sun, salty spray, or icy wind – the BATLINK 3D2SL is prepared for anything. Made from a robust material mix of nylon, rubber, and aluminum, this suction cup mount is not only extremely stable but also UV-resistant and weatherproof. Your antenna mount remains reliable even with long-term use and retains its full holding power. Trust in quality that delivers what it promises.
Strengths & Notes at a Glance
- Pro: Extreme Holding Power: Two premium suction cups (Ø 12 cm) offer an impressive load capacity of up to 100 kg on smooth surfaces such as glass, metal, or GRP.
- Pro: Drill-Free Mounting: Enables temporary installations without damaging the surface, ideal for vehicles or rental properties.
- Pro: High Flexibility: The integrated 3D tilt joint is 2x 180° swiveling and allows for perfect alignment of the antenna, even on sloped or uneven surfaces.
- Note: Surface Dependency: Maximum holding power is exclusively guaranteed on clean, smooth, and non-porous surfaces. On rough, structured, or dirty surfaces, adhesion can be severely limited.
- Note: Maintenance Requirement: For long-term use or extreme weather conditions, regular inspection of the suction cup mount and, if necessary, re-attachment may be required to ensure full holding power.
Specifications & Features
| Manufacturer: | BATLINK |
| Model: | 3D2SL |
| Product Type: | 3D Tilt Mount with Double Suction Cup |
| Load Capacity: | 2x 50 kg (100 kg total) |
| Swivel Range: | 2x 180° (3D Tilt Joint) |
| Material: | Nylon / Rubber / Aluminum |
| UV Resistance: | Yes |
| Weather Resistance: | Yes |
| Connection Thread: | 1" x 14 BSF |
| Cable Cut-out: | Yes (lateral) |
| Suction Cup Diameter: | 12 cm (per cup) |
| Dimensions (Base Area): | 289 x 126 mm |
| Dimensions (Height): | 174 mm |
| Weight: | 735 g |
| Mounting Type: | Suction Cup (drill-free) |
| Application Area: | Motorhome, Boat, Panel Van, Smooth Surfaces |
Scope of Delivery
| 1 x BATLINK 3D2SL Base Mount (Joint) |
| 2 x Premium Suction Cups (Ø 12 cm) |
| 4 x M6x16 Stainless Steel Screws (Hex Socket) |
| 1 x User Manual |
Frequently Asked Questions (FAQ)
Which surfaces is the BATLINK 3D2SL double suction cup suitable for?
The BATLINK 3D2SL double suction cup is ideal for smooth surfaces such as glass, metal, and GRP (glass-fiber reinforced plastic), as you would find them on your motorhome, boat, or windows, for example.
What is the load capacity of the BATLINK 3D2SL mount?
The BATLINK 3D2SL mount offers an extreme holding force of up to 100 kg on smooth surfaces, with each of your two suction cups capable of carrying up to 50 kg.
Can I use Antenna Cables with pre-assembled connectors?
Yes, the standardized 1" x 14 BSF thread of the mount features a side cable recess, which allows you to easily insert Antenna Cables with pre-assembled connectors without having to cut them.
How flexible is the antenna alignment with this holder?
Thanks to the integrated 3D tilt joint, which is 2x 180° swiveling, you can align your antenna very flexibly and precisely, even if the surface is sloped.
Is the BATLINK 3D2SL mount weatherproof?
Yes, the mount is made of a robust material mix of nylon, rubber, and aluminum, which is UV-resistant and durable, making it weatherproof for your applications.
Is drilling necessary for mounting the BATLINK 3D2SL?
No, the BATLINK 3D2SL mount allows for a rock-solid installation without any drilling, making it ideal for your temporary setups.
Homepage: https://www.batlink.de/
