Coaxial Pigtails

The JARFT J2250-RPSMA 2x2 MIMO WLAN window feed-through is the ideal solution for connecting a 2x2 MIMO WLAN outdoor Antenna to your indoor WLAN router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window cable can easily be routed through a window frame or simply laid inside it without damaging or affecting the frame, the window, or the locking mechanism.Equipped with two RP-SMA plugs and two RP-SMA sockets, the window feed-through ...

The JARFT J2250-RPSMA 4x4 MIMO WLAN window feed-through provides an excellent solution for connecting a 4x4 MIMO WLAN outdoor Antenna to your indoor WLAN router or access point without the need for drilling. At 50 cm long and featuring an ultra-thin design, this window cable can easily be placed through or laid inside a window frame without causing any damage to the frame, window, or locking mechanism.Equipped with four RP-SMA plugs and four RP-SMA sockets, the feed-through ensures a st...

The JARFT J2250-SMA 4x4 MIMO 5G/LTE window feed-through is the perfect solution for connecting a 2x2 MIMO 5G or LTE outdoor Antenna to your indoor router or access point without the need for drilling. With a length of 50 cm and an ultra-flat design, the window cable can be easily routed through or laid inside a window frame without damaging or affecting the frame, window, or locking mechanism.Equipped with two SMA plugs and two SMA sockets, the feed-through ensures a secure and low-loss...

This ultra-thin window cable/window feedthrough is 40 cm long and equipped with an RP-SMA male plug and an RP-SMA female socket. This makes the cable ideal for routing the Antenna cable of a WiFi Antenna through a window. Simply place the flat cable in the frame with the window open and then carefully close the window.

This ultra-thin window cable/window feedthrough is 40 cm long and equipped with an SMA plug and an SMA socket. This makes the cable ideal for routing the Antenna cable of a 3G, 4G, or 5G Antenna through a window. Simply place the flat cable in the frame with the window open and then carefully close the window.

This high-quality Coaxial Pigtail reliably connects devices with a U.FL connector to external Antennas or components with an SMA female connector. With a length of 20 cm, it offers optimal flexibility for installations in confined spaces without unnecessary signal loss. It is ideal for WLAN, LTE, GPS, and IoT applications where a robust and stable RF connection is crucial. The precise manufacturing ensures long-lasting performance and minimizes the risk of connection interruptions.Highligh...

The bridge from board to Antenna. This high-quality Coaxial Pigtail connects internal radio modules (with U.FL / IPEX connector) to external Wi-Fi Antennas (RP-SMA). With a length of 25 cm, it offers enough flexibility for clean routing inside PC cases, routers, or industrial boxes. The cable is made of robust RG-178, providing better shielding and durability than standard wires. The RP-SMA jack is designed as a "bulkhead": Thanks to the included nut and washer, you can screw it firmly into a...

High-quality assembled Coaxial Pigtail with the connector combination U.FL plug to N male plug. The low loss pigtail has a length of 25cm and is made on RG-178 cable.

Your upgrade for stable 5G & LTE: This 2x2 MIMO magnetic base is the ultimate problem solver for virtually any common cellular router or stationary modem. Let’s be honest: if your Antennas are stuck in the back of a Network cabinet, under a desk, or in the darkest corner, your data rate will tank. With this stand, you can easily bring your two Antennas out of hiding and place them—thanks to the 1.5-meter cable—exactly where the reception actually rocks, like right by the window. The powerful ...

With its universal RP-SMA connector and 1.5-meter cable, this magnetic base is the perfect solution for flexible positioning of your WiFi Antennas. It was developed to move your Antennas out of the radio shadow of your PC or cabinet and place them in an optimal location. The result: a noticeably more stable signal and better reception, whether for WiFi, Bluetooth, or your Helium.The stand is designed as 1x1 SISO (Single Input, Single Output) and features an integrated, flexible Coaxial Pi...

Constant connection drops while gaming? Stuttering streams, even though you pay for fast internet? The problem is often not your tariff, but the location of your Antennas – caught in the radio shadow behind your PC case. This WiFi Antenna Extension with Stand is the simple and ingenious solution. Position your WiFi Antennas freely in the room for a maximally strong and stable signal.This stand was specially developed for modern 2x2 MIMO systems and offers two separate lines for maximum da...

Annoyed by constant WiFi dropouts and lag spikes in the middle of your game? Is your PC in a dead zone under your desk, blocking the signal? This external Antenna stand for Gaming PCs and WiFi Routers is the solution. Position your three WiFi Antennas with the 1.5-meter Antenna extension exactly where reception is best, and get back the stable, fast Network connection you deserve.This Antenna base is specifically designed for modern 3x3 MIMO systems and uses the universal RP-SMA connector...

Constant lags, connection drops, and a WiFi signal that barely leaves the room? Your high-end setup deserves more! Often, it's not the WiFi Router's fault, but the unfavorable position of your WiFi Antennas, tucked behind your PC or in a cabinet. This 4x4 MIMO Magnetic Base for WiFi Antennas is your simple and ingenious solution to elevate your Network to the next level and ensure stable reception. The perfect WiFi Antenna base for your Gaming PC and demanding setups!With four bundled, 1....

Coaxial Pigtail with connector FME male to CRC-9 male. The cable used is an RG-178 cable with a length of 25cm. Further information about CRC-9 connector can be found below in the description.

Coaxial Pigtail with connector combination FME male to MC-CARD male. The cable used is an RG-178 cable with a length of 25cm. Further information about MC-CARD connector can be found below in the description.

Coaxial Pigtail with connector combination FME male to SSMB male. The cable used is an RG-178 cable with a length of 25cm. Further information about SSMB connector can be found below in the description.

Flexible Coaxial Pigtail / Adapter: SMA Female to TS-9 Male:This flexible Coaxial Pigtail features an SMA female connector and a TS-9 male connector, utilizing a 25 cm long RG-178 cable. It is commonly used to connect an LTE or 5G Antenna to a mobile LTE / 5G Router. Many of these compact mobile routers use the TS-9 connector format for external Antenna connections, while standard LTE or 5G Antennas are typically equipped with SMA connectors.Advantages of the Pigtail:The pigtail offers a fl...

Flexible Coaxial Pigtail / Adapter: SMA Female to CRC-9 Male: This flexible Coaxial Pigtail features an SMA female connector and a CRC-9 male connector, utilizing a 25 cm long RG-178 cable. It is commonly used to connect an LTE or 5G Antenna to a mobile LTE / 5G Router. Some of these compact mobile routers use the CRC9 connector format for external Antenna connections, while standard LTE or 5G Antennas are typically equipped with SMA connectors. Advantages of the Pigtail: The pigtail offers a...

Coaxial Pigtail with connector combination SMA female to MC-CARD male. The cable used is an RG-178 cable with a length of 25cm.

Flexible Coaxial Pigtail / Adapter: SMA Female to SMA Male: This flexible Coaxial Pigtail features an SMA female connector and an SMA male connector, utilizing a 25 cm long RG-178 cable. It is commonly used to connect an LTE or 5G Antenna to an LTE / 5G Router. Rigid and immovable Antenna cables can create a high leverage effect on the Antenna connection of your LTE or 5G router. To reduce this strain, you can use this pigtail. Advantages of the Pigtail: Rigid and immovable Antenna Cables can...

The Coaxial Pigtail is equipped with a FAKRA Z and an SMA socket. The pigtail is made on RG-178 cable and has a length of 25cm.