Ubiquiti Networks

Ubiquiti NanoStation 5AC Loco | airMAX ac CPE, 5 GHz, 450+ Mbps

Direct Benefit: The Ubiquiti NanoStation 5AC Loco is your ultimate solution for a cost-effective and extremely powerful wireless bridge. It delivers massive data throughput of over 450 Mbps, far exceeding standard solutions when it comes to establishing a stable Network connection between a house and a barn or two company buildings.


As a highly integrated Customer Premises Equipment (CPE), the LOCO5AC combines a powerful Antenna and the radio unit in an ultra-compact, weatherproof housing. It was specifically developed for use in Point-to-Point (PtP) or Point-to-Multi-Point (PtMP) networks and utilizes the proprietary airMAX ac protocol to ensure maximum performance and interference immunity. Setup is made easy by the separate 2.4 GHz management radio.


Highlights

  • Excellent Value for Money: Get carrier-class performance with over 450 Mbps data throughput at a fraction of the usual cost.
  • Ultra-compact Design: The small, lightweight, and UV-stabilized housing allows for inconspicuous and quick mounting with minimal wind load.
  • Lightning-fast Setup: Thanks to the dedicated 2.4 GHz management WiFi, you can conveniently configure it directly on the pole using your smartphone and the UISP™ Mobile App.
  • High Interference Immunity: The integrated 13 dBi panel Antenna with a 45° beamwidth strongly focuses the signal, reduces interference, and ensures a stable connection.
  • Enormous Range: Bridge distances of up to 10 kilometers under optimal conditions – ideal as an invisible Ethernet Cable.

Do you have any questions about the Ubiquiti NanoStation 5AC Loco? Then just ask us!


52,99 €
incl. 19% VAT , plus shipping costs
Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)
Front view of the compact Ubiquiti NanoStation 5AC Loco...
Ubiquiti NanoStation 5AC Loco | airMAX ac CPE, 5 GHz, 450+ Mbps
52,99 € *

Your Invisible Ethernet Line: The NanoStation 5AC Loco

Imagine being able to connect two buildings, hundreds of meters or even kilometers apart, with a Gigabit Network connection – without expensive and complex excavation work. This is exactly what the Ubiquiti NanoStation 5AC Loco makes possible. Two of these devices form a dedicated Point-to-Point (PtP) Wireless Bridge, acting like a long, invisible Ethernet Cable. Stream 4K videos, transfer large amounts of data, or effortlessly extend your Network to an outbuilding, workshop, or garden shed. The connection is stable, fast, and extremely reliable thanks to the airMAX ac protocol.


Compact Design Meets Maximum airMAX ac Power

The LOCO5AC is a masterpiece of efficiency. Its extremely compact and lightweight housing not only makes it inconspicuous but also easy to install. Despite its small size, it packs powerful technology: a high-performance MIPS processor and the advanced airMAX ac protocol ensure a real data throughput of over 450 Mbps. The UV-stabilized plastic housing is designed for harsh outdoor use and can withstand temperatures from -40°C to 70°C, making it the perfect choice for a durable and low-maintenance outdoor installation.


Designed for Professionals: Client (CPE) or Bridge

The NanoStation 5AC Loco is not only ideal for simple Point-to-Point connections. Its primary function is that of a powerful client, also known as Customer Premises Equipment (CPE), in a Point-to-Multi-Point (PtMP) Network. In this scenario, it connects to a central airMAX base station, reliably providing internet to remote locations. Configuration is easier than ever thanks to the innovative 2.4 GHz management radio and the UISP Mobile App – set everything up directly on-site with your smartphone, without needing to connect a laptop.


Strengths & Notes at a Glance

  • Pro: Offers extremely high data throughput of 450+ Mbps at an unbeatable price.
  • Pro: Very compact, lightweight, and weatherproof design for easy and inconspicuous mounting.
  • Pro: Simplified on-site configuration via dedicated 2.4 GHz management WiFi and UISP app.
  • Pro: High interference immunity and range due to directional Antenna and focusing in the 5 GHz band.
  • Note: A PoE Injector for Power Supply is not included and must be purchased separately.
  • Note: Incompatible with standard WiFi devices (smartphones, laptops) as it uses the proprietary airMAX protocol.

Specifications & Features

Manufacturer:Ubiquiti
Model:NanoStation 5AC Loco
Manufacturer Part Number (MPN):LOCO5AC
EAN:0810354026331
Device Type:Customer Premises Equipment (CPE) / Wireless Bridge
Processor:Atheros MIPS 74Kc
Processor Clock Speed:560 MHz
RAM:64 MB DDR2
Max. TCP/IP Throughput:450+ Mbps
Max. Range:10+ km (under optimal conditions)
Operating System:Ubiquiti airOS® 8
RF Frequency Band (Main Radio):5 GHz
Operating Frequency (Worldwide):5150 - 5875 MHz
Wireless Standard:Proprietary airMAX ac
MIMO:2x2 MIMO
Channel Bandwidth (PtP Mode):10/20/30/40/50/60/80 MHz
Channel Bandwidth (PtMP Mode):10/20/30/40 MHz
Antenna Type:Integrated Panel Antenna
Antenna Gain:13 dBi
Polarization:Dual-Linear
Beamwidth:45° (H/V/Elevation)
Management Radio Module:2.4 GHz (2412 - 2472 MHz)
Network Interface:(1) 10/100/1000 Gigabit Ethernet Port
Power Supply Method:Passive Power over Ethernet (24V)
Supported Voltage Range:22–27V DC
Max. Power Consumption:7W
PoE Power Adapter:NOT included
Recommended PoE Power Adapter:24V, 0.3A Gigabit PoE Adapter (e.g., POE-24-7W-G-WH)
Dimensions:179 x 77.5 x 59.1 mm
Weight:180 g
Housing Material:UV-stabilized Plastic (Outdoor Use)
Operating Temperature:-40°C to 70°C
Operating Humidity:5 to 95% (non-condensing)
ESD/EMP Protection:±24kV Contact/Air
Wind Survivability:200 km/h
Mounting:Pole Mounting (Cable Ties Incl.)
Certifications:CE, FCC, IC


Scope of Delivery

1 x Ubiquiti NanoStation 5AC Loco (LOCO5AC)
1 x Pole Mounting Kit (Cable Ties)

Frequently Asked Questions (FAQ)

Can I use the NanoStation 5AC Loco as a regular WiFi Access Point for my home?

No, that is not possible. The NanoStation 5AC Loco uses Ubiquiti's special airMAX protocol and is not compatible with standard WiFi devices such as smartphones or laptops. It is exclusively used for establishing wireless bridges (PtP) or as a client in an airMAX Network (PtMP).


What do I need to connect two buildings?

You will need two Ubiquiti NanoStation 5AC Loco units, one for each building. Additionally, you will need two 24V Passive PoE Injectors (as these are not included) and four Ethernet Cables. A clear line of sight between the two devices is essential for optimal performance.


Is a PoE Power Supply included?

No, a PoE Injector / Power Supply is not included with the single packaging of the LOCO5AC. You must purchase a compatible 24V, 0.3A (or 0.5A) Gigabit PoE Adapter separately.


How is the NanoStation 5AC Loco configured?

Configuration can be done in two ways: Either via the UISP Mobile App on your smartphone by connecting to the device's temporary 2.4 GHz management WiFi, or traditionally via a web browser by connecting a computer with an Ethernet Cable and accessing the airOS interface. This allows for easy management of your Network.


What is the range of the NanoStation 5AC Loco connection?

Under ideal conditions, meaning perfect line of sight and low environmental interference, a range of over 10 kilometers can be achieved. In real-world scenarios with potential obstacles or heavy rain/snow, the effective range and stability of the Network connection may be lower.


Do I have to pay a license fee for using the 5 GHz frequency band?

No, the NanoStation 5AC Loco operates in the globally license-free 5 GHz frequency band. However, it is the installer's responsibility to ensure that the device is operated in accordance with the local regulatory requirements of the respective country regarding frequency channels and transmission power for 5 GHz Components.


Manufacturer information: Name: Ubiquiti Inc.
Street name: Third Avenue 685
Postal code, City: 10017 , New York
Country: Vereinigte Staaten
State: New York
Homepage: https://www.ui.com

Write the first review for this item and help others make a purchase decision!: