SALE!

Cyberbajt GigaSektor PRO 14/90 HV is a professional, high-performance, very small sector antenna utilizing advanced point-to-multipoint wireless networking solutions. Enclosure of the Sector Antenna is made of solid UV resistant plastic and stainless steel. It is weatherproof and can be used in- and outdoor. It is designed for mast/pole or wall installation and has two RP-SMA connectors.

LigoWave LigoDLB 5ac is a weatherproof access point / station for outdoor use. The robust device supports the iPoll3 protocol based on 802.11ac standard. Any 802.11ac-capable WiFi antennas can be connected to the two external antenna connectors (N socket) of the LigoDLB 5ac - It can be used for point-to-point as well as for multipoint connections.

LigoWave MACH 5 is a powerful and state-of-the-art wireless point-to-point CPE, specifically designed for demanding network environments. This innovative solution enables wireless data transmission over long distances with high speed and reliability.

This item is a B-grade product:
- The item may show signs of use
- The product images display new items, not the B-grade product
- Separate 12-month warranty
- Original packaging may be damaged or not included

Die A-XPOL-0001-V2-21 enstammt der zweiten Generation "V2" der sehr beliebten kreuzpolarisierten XPOL-1-5G Serie mit einem Leistungsgewinn von 3dBi. Bei der A-XPOL-0001-V2-21 handelt es sich um eine 2x2 MIMO Antenne. Neben den klassischen Frequenzbändern für GSM, UMTS und LTE Anwendungen unterstützt die A-XPOL-0001-V2-21 zusätzlich die neueren 3400 - 3800 MHz Frequenzbänder. Somit kann diese leistungsstarke Antenne für 2G, 3G (UMTS), 4G (LTE) und 5G verwendet werden. Die XPOL-1-5G Antenne arbeitet in den folgenden Frequenzbändern: 698 - 960 MHz, 1700 - 2170 MHz, 2300 - 2700 MHz und 3400 - 3800 MHz. Sie verfügt über ein wetter- und staubfestes IP65 Gehäuse und hat 2 x 5m Antennenkabel mit Standard SMA-Stecker.

Dieser Artikel ist ein B-Waren Artikel:
- Der Artikel kann Gebrauchsspuren aufweisen
- Die Artikelbilder zeigen Neuware, nicht den B-Ware Artikel
- Gesonderte Gewährleistung von 12 Monaten
- Originalverpackung kann beschädigt/nicht vorhanden sein

The Ubiquiti UVC G5 Flex is an IP camera for indoor and outdoor use. It has a resolution of 1080p and a 3x digital zoom. The camera is equipped with a wide-angle lens and offers a viewing angle of up to 87 degrees. The UVC G5 Flex is compatible with Ubiquiti's UniFi Protect software and can be controlled through the UniFi app. The camera is easy to install and can be powered through Power over Ethernet (not included in the package).

Extralink Jump Max7 is an ultra-portable, lightweight and compact 10000 mAh powerbank for car starting. With it, you can safely start your car with a discharged battery in seconds. The power bank can charge any personal mobile device, such as a smartphone, tablet or other USB devices. It also has an integrated flash light.

The Smartmi Evaporative Humidifier from Xiaomi ensures a pleasant and gentle humidity in your home with its innovative evaporation system. Without developing fog, it gently humidifies the room air and is therefore particularly suitable for sensitive users. The humidifier has a 4 liter water tank and can evaporate up to 240ml of water per hour.

The XORO HAN 2007 is a high-density 4G antenna in a compact format designed for use with an MiFi 4G router. The MiMo technology ensures full 4G/4G+ compatibility. The indoor antenna supports all 4G frequency bands (800, 1800, 2600 MHz) and provides a performance gain of up to 11dBi. The 0.2m antenna cable is equipped with CRC-9 conenctors. In addition, the antenna base has a holder for a MiFi router. The antenna and router form a unit. The short antenna cable means there are hardly any losses.

This shielded, CAT6 STP network cable is suitable for 10/100/1000 Mbps networks in any type of network structure. The patch cable has a LSOH coat (low smoke, halogen-free), has an RJ-45 plug on both ends and comes in the selected color and with a length of 5m.

LigoWave LigoDLB 5ac is a weatherproof access point / station for outdoor use. The robust device supports the iPoll3 protocol based on 802.11ac standard. Any 802.11ac-capable WiFi antennas can be connected to the two external antenna connectors (N socket) of the LigoDLB 5ac - It can be used for point-to-point as well as for multipoint connections.

This shielded, CAT6 STP network cable is suitable for 10/100/1000 Mbps networks in any type of network structure. The patch cable has a LSOH coat (low smoke, halogen-free), has an RJ-45 plug on both ends and comes in the selected color and with a length of 10m.

This modification kit allows you to equip your FritzBox or Speedport router with 2.4 GHz, 7dBi omnidirectional WiFi antenna.

This shielded, CAT6 STP network cable is suitable for 10/100/1000 Mbps networks in any type of network structure. The patch cable has a LSOH coat (low smoke, halogen-free), has an RJ-45 plug on both ends and comes in the selected color and with a length of 15m.

This modification kit allows you to equip your FritzBox or Speedport WiFi router with 2.4 GHz, 7dBi omnidirectional WiFi antenna.

Mount your CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the Rack Mount Accessory for a clean and secure installation.

This shielded, CAT6 STP network cable is suitable for 10/100/1000 Mbps networks in any type of network structure. The patch cable has a LSOH coat (low smoke, halogen-free), has an RJ-45 plug on both ends and comes in the selected color and with a length of 30m.

This weatherproof, shielded 50m CAT.5e STP PREMIUM Ethernet cable can be used 10/100/1000 Mbps networks and outdoor installations.

This shielded, CAT6 STP network cable is suitable for 10/100/1000 Mbps networks in any type of network structure. The patch cable has a LSOH coat (low smoke, halogen-free), has an RJ-45 plug on both ends and comes in the selected color and with a length of 50m.

Universal Netzteil mit DC 12V und 60W, AC100-265V und Kaltgerätekabel.

Teltonika FMB010 is easy OBDII Plug and Play tracker with GNSS, GSM and Bluetooth connectivity. FMB010 is perfectly suitable for light vehicle tracking in applications like courier delivery service, car rental & leasing, insurance telematics and many other where simple integration is a must. This device supports temperature/humidity sensors, hands-free, firmware and configuration update via Bluetooth.

Extend your 2.0 USB cable length up to 60 meters using the LogiLink UA0092 USB repeater cable. A maximum of 5 repeater cables (5 x 12 meters) can be used while having full performance of up to 480 Mbps. Thanks to the shielding it is protected against electromagnetic interference.

Coaxial pigtail with connector combination RP-SMA male to MC-CARD male. The cable used is an RG-178 cable with a length of 15cm. Further information about MC-CARD connector can be found below in the description.

Teltonika TMT250 is an autonomous personal tracker with GNSS, GSM and Bluetooth connectivity. This mini tracker is designed for people, pets, car monitoring, employees control, sport events, etc. IP67 waterproof case ensures outside usage in harsh conditions, moreover large battery‘s capacity expands application range where long battery lifetime is needed. In addition to that, TMT250 supports hands-free, firmware and configuration update via Bluetooth.

This is a standard DC distribution cable with 2 x straight male plug to 1x female barrel jack ( 5.5 / 2.1mm).

Coaxial pigtail with connector FME male to CRC-9 male. The cable used is an RG-178 cable with a length of 25cm. Further information about CRC-9 connector can be found below in the description.

LigoWave's DLB 2-14N delivers the highest performance and stability available in the 2.4 GHz CPE class. This product combines a highly advanced radio core containing MIMO 2x2 technology with an integrated, high-gain, dual polarization directional antenna. The feature-rich operating system is optimized for ultra-high performance wireless communications while optionally allowing compatibility with older 802.11n standard devices.

Ubiquiti Networks NanoStation M5 / NSM5 is a powerful, robust and weatherproof CPE based on 5 GHz with integrated 16dBi directional antenna and airMAX technology. In point-to-point operation mode with activated airMAX protocol, a real data throughput of 150Mbps is possible. The NSM5 has a range potential of 15km+.

Coaxial pigtail with connector combination FME male to MC-CARD male. The cable used is an RG-178 cable with a length of 25cm. Further information about MC-CARD connector can be found below in the description.

Coaxial pigtail with connector combination FME male to SSMB male. The cable used is an RG-178 cable with a length of 25cm. Further information about SSMB connector can be found below in the description.

This antenna combines a 3G / WiF and GPS antenna in a very compact combo antenna. The three antenna cables are each 3m long and have matching connectors. The 3G / WiFi / GPS multi-antenna can be used outdoors without any problems and optionally glued on or easily mounted via the integrated magnet.

Ubiquiti LTU-LITE is a CPE with an integrated 13dBi directional antenna for use as a PtMP client device in combination with an LTU-Rocket as a base station. The LTU-LITE uses the proprietary LTU technology from Ubiquiti and thus breaks the performance limits of the current 802.11 WiFi standards. The flexibility in the selection of the channel width (10/20/30/40/50 ... 100 MHz) enables independent TX and RX frequency configurations in the 5GHz radio band, whereby interference can be avoided. The tailor-made LTU chip and radio architecture offers a real TCP / IP throughput of up to 600+ Mbps and modulation rates of up to 4096 QAM.

The 100m spool of CAT.6 Installation Cable/Structured Cable provides a reliable and high-performance solution for your network installations. With its length of 100 meters, you have ample cable to connect your networks. The CAT6 cable is suitable for use with network outlets, patch panels or similar - The wires are suitable for application with LSA tool. The halogen-free jacket of the cable not only provides reliable protection but also contributes to environmental friendliness and adds an extra layer of safety to your network area.

The IMILAB CMSXJ23A is a compact USB webcam with 1080p resolution at 30 frames per second (FPS) with a 90° wide angle lens - the camera delivers an extremely good pice- / performance ratio and is connected directly to your PC or notebook via plug & play via USB cable and can be easily operated use for Zoom or Skype conferences.

The 70mai Dash Cam A400 is equipped with a 3.6MP camera that records 2.5K videos (2560x1440 pixels). With a viewing angle of 145°, the camera covers 3 lanes and side pedestrian zones.Thanks to night vision technology, the device automatically adjusts exposure in low light conditions.

This compact 433 MHz omnidirectional antenna / rod antenna with 2dBi gain is suitable for short distances. The signal is radiated evenly in all directions thanks to the almost spherical radiation characteristics. The antenna is designed for indoor use. The omnidirectional radiator has a SMA connector with an articulated joint. The antenna is white, weighs just 10g and has the following dimensions: 10.8cm x 1cm

The adaptor consists of a flat plastic pad with a 50 cm cable that terminates in a SMA (female) connector. The plastic sleeve, that looks like a cell phone battery, encloses a device that can couple to a cell phone and divert it to a booster antenna thereby ensuring better reception. The pad of the coupler is placed against the top of the phone. (The coupler is supplied with a small piece of Velcro that you can use to ensure a more secure connection to your phone). You then connect the other end of the coupler to one of our booster antennas via the SMA (female) connector. The booster antenna can be mounted on the outside of a building and pointed in the direction of your closest cellular base station to ensure good reception.

10pcs Ubiquiti TC-CON RJ45 connectors: The plugs fit perfectly with the Ubiquiti Ethernet cable TOUGHCable PRO and CARRIER and can be put on with a regular crimping tool.

Ubiquiti TOUGHCable RJ45 connectors / TC-CON fit to Ubiquiti TOUGHCable PRO and CARRIER (Level 1, Level 2) and can be applied with regular RJ45 crimping tool.

With USG Rackmount-Kit you can easily integrate a Ubiquiti USG into a standard rack. The kit takes up one height unit (1U) - up to two USG including the power supply can be used with the rack mounting kit. The USG is not included in the scope of delivery.

This weatherproof, shielded 2m CAT.5e STP PREMIUM Ethernet cable can be used 10/100/1000 Mbps networks and outdoor installations.