Rock-Solid Hold: The Four-Hole Flange Makes the Difference
Forget wobbly connections that loosen over time. The solid 4-hole flange of this N-mount jack is designed for professional use. Once screwed to your housing or panel, it offers an unsurpassed stable and vibration-proof connection. This is particularly important for applications exposed to mechanical stress. In addition, the large-area mounting ensures an excellent ground connection (earthing), which improves shielding and effectively minimizes interference.
Performance Without Compromise: From DC to 11 GHz
When every decibel counts, this 50 Ohm N-flange jack up to 11 GHz is the right choice. The precise construction, the high-quality PTFE insulator (Teflon®), and the gold-plated inner conductors guarantee extremely low-loss signal transmission over a huge frequency range. Whether you're building a stable WiFi connection, installing a 4G/5G Antenna, or operating measurement technology – this jack ensures that your signal arrives clean and strong at its destination.
Built for Eternity: Premium Materials for Your Project
This jack is not a disposable item, but a component built to last. The nickel-plated brass housing resists corrosion, while the gold-plated inner conductor ensures perfect conductivity even after years. The PTFE insulator is not only electrically superior but also extremely heat-resistant. This makes soldering your Cable to the internal solder pin safe and straightforward, without anything melting or getting damaged. A Coaxial Adapter you can rely on.
Installation for Professionals: What You Should Consider
This High-Performance N-Jack for Soldering is aimed at users who value a clean and permanent installation. For mounting, you need precise drillings for the four fastening screws and the central feed-through. The internal connection of your Coaxial Cable requires a soldering iron and some practice. However, the result is a professional, low-attenuation, and extremely durable connection that surpasses any standard solution.
Strengths & Notes at a Glance
- Pro: The solid four-hole flange enables extremely stable and vibration-proof mechanical fastening.
- Pro: Designed for frequencies up to 11 GHz and high power for low-loss signal transmission.
- Pro: Gold-plated contacts, PTFE insulator, and brass housing ensure maximum corrosion protection and durability.
- Pro: Compatible with all standardized 50-Ohm N-connectors worldwide thanks to compliance with the MIL-STD-348 standard.
- Note: Installation requires precise drillings for the flange and the central feed-through.
- Note: Soldering skills and appropriate tools are required for connecting the internal Cable.
Specifications & Features
| Item Name: | Coaxial Adapter - N Jack, Mount Jack, Four-Hole Flange |
| EAN / GTIN: | 4251028601526 |
| Manufacturer's Article Number (MPN): | N-14-11-TGN |
| Category: | Coaxial Adapters / Mount Jacks |
| Function: | Interface on Housing Wall / Panel |
| Connection A (Outside): | N-Jack (Female) |
| Connection B (Inside): | Solder Connection (Solder Cup / Solder Pin) |
| Characteristic Impedance (Impedance): | 50 Ohm |
| Frequency Range: | DC - 11 GHz |
| Mounting Type: | 4-Hole Flange Mounting |
| Housing Material: | Brass, nickel-plated |
| Contact Material (Inner Conductor): | Gold-plated |
| Insulator (Dielectric): | PTFE (Polytetrafluoroethylene / Teflon®) |
| Standard Compliance: | MIL-STD-348 |
| Weather Resistance: | High (often corresponds to IP67 with correct mounting) |
| RoHS Compliance: | Yes |
| Power Transmission: | Designed for high power (e.g., several hundred watts @ 2.4 GHz) |
| Weight: | approx. 31 g |
Scope of Delivery
| 1 x Coaxial Adapter - N Jack, Mount Jack, Four-Hole Flange (N-14-11-TGN) |
Frequently Asked Questions (FAQ)
Do I need special tools to mount your N-panel mount jack?
Yes, for a clean and stable installation, you'll need the right tools. You'll need a drill for the four mounting holes, a suitable screwdriver, and for connecting your Cabling, a soldering iron and a steady hand.
Is your N-jack waterproof for outdoor use, for example, on an Antenna?
Absolutely! The N-connection, with its design featuring sealing rings, is highly weather-resistant, often meeting IP67 standards, especially when you screw it together with a suitable N-connector. It's important that you correctly install the jack into your Enclosures. Our tip: An additional seal between the flange and your Enclosure wall provides maximum protection.
Can I use this 50-ohm jack for my 75-ohm SAT cable?
We strongly advise against it! This jack is specifically designed for 50 ohms, which is common for WiFi, 4G / LTE Routers, or radio technology. Your SAT or TV system uses 75 ohms. Mixing them will lead to massive signal losses and, in the worst case, can even damage your device's transmitting unit.
What is the white insulator inside made of and why is that important for me?
The insulator is made of high-quality PTFE, better known as Teflon®. This is super important for you because this material ensures extremely low-loss signal transmission even at high frequencies. Additionally, it's so heat-resistant that it won't melt when soldering your Cabling.
How much power in watts can your N-jack handle?
This jack is a real powerhouse. N-connectors are designed for high power, often several hundred watts in the 2.4 GHz Components range. So, for all common applications like WiFi, 4G, or amateur radio, you're more than safe with it.
Does the four-hole flange provide better grounding than a standard jack?
Yes, potentially. By using the four screw points with a metal Enclosures, you create a large-area and very reliable ground connection. This can improve shielding and more effectively reduce interference compared to a simple central nut fastening, which can loosen.
Homepage: https://www.jarft.eu/
