Skip to consent manager Skip to main content Skip to search Skip to category navigation Skip to footer
Ubiquiti NanoStation M2 - Link Set, 2.4 GHz, 150Mbps+, 13km
The Ubiquiti NanoStation M2 WLAN Bridge Set is an ideal solution for wirelessly connecting two distant locations. It includes two robust and weatherproof Ubiquiti NanoStation M2 devices operating on a 2.4 GHz band, each featuring an integrated 11dBi panel antenna. With a range potential of up to 13 km and data transfer speeds of up to 150 Mbps, this set is particularly suitable for medium distances with moderate data volumes. The NanoStation M2 utilizes innovative airMAX technology, ensuring a stable and reliable connection even under demanding conditions.

The set is available in various configuration options: unconfigured, pre-configured, or pre-configured with a firmware upgrade. The pre-configured mode is particularly convenient, with the devices delivered with individual encryption and DHCP activated. This allows for immediate use right out of the box (Plug & Play). For optimal performance, the two NanoStation M2 devices should be installed outdoors with a clear line of sight between them, minimizing signal loss and maximizing connection quality.

Power is supplied to the NanoStation M2 via Power over Ethernet (PoE), eliminating the need for additional power cables. The required PoE injectors are included, simplifying the installation process. This set is an excellent choice for those in need of a reliable and high-performance WLAN bridge for medium distances.

Configuration
from 199,99 €
incl. 19% VAT , plus shipping costs
Available immediately
Delivery time: 3 - 5 Workdays (DE - int. shipments may differ)

This WiFi bridge set consists of two Ubqiuiti NanoStation M2 (NSM2) - The components are delivered either unconfigured or preconfigured (plug & play). The Ubiquiti NanoStation M2 is a robust and weatherproof CPE based on 2.4GHz with an integrated 11dBi panel directional antenna, airMAX technology and a range potential of 13km with up to 150Mbps real TCP/IP data throughput. The WiFi bridge is therefore suitable for medium distances with a medium data volume.

New Leading-Edge Industrial Design

The original NanoStation set the bar for the world's first low-cost and efficiently designed outdoor broadband CPE. The new NanoStation M2 take the same concept to the future with new redesigned sleek and elegant form-factors.

Next-Gen Antenna Design

The integrated, dual-polarized directional antennas have a gain of 11dbi and optimized cross-polarity isolation with small size.

Dual Ethernet Connectivity

The NanoStation M2 provides a secondary ethernet port with software-enabled PoE output which can power an external device, such as a PoE security camera, for seamless IP video integration.

Passive PoE

Using PoE technology allows to transmit data stream and power / energy through the enthernet cable which integrates the NSM2 to your network enviroment. There is no need to to install any extra wired power cord. A 24V, 0.5A PoE Injector is included.



Technical Data:

Manufacturer / Product: Ubiquiti Networks / NanoStation M2
Processor Specs: Atheros MIPS 24KC, 400MHz
Memory Information: 32MB SDRAM, 8MB Flash
Operating System: AirOS 5
Networking Interface: 2 x 10/100 BASE-TX (Cat. 5, RJ-45)
Frequency Band: 2.4 GHz (Standard)
Supported WLAN Standards: IEEE 802.11b: 11 Mbps
IEEE 802.11g: 54 Mbps
IEEE 802.11n: 300 Mbps
TX Power: max. 28dBm
RX Sensitivity: min. -97dBm
Range: 13+ km
TCP/IP Throughput: 150Mbps+
Antenna: 2 x 11dBi Panel Antenna
Beam: 55° Horizontal - 53° Vertical
max. Power Consumption: 8 Watt
Power Input: 12-24V
Power Method: Passive Power over Ethernet
Appliance: In- and Outdoor
Dimensions: 29.4cm x 8cm x 3cm
Weight: 0.4 kg
Operating Temperature: -30°C to +80°C
Operating Humidity: 5% to 95% non condensing


Scope of delivery:

2 x Ubiquiti 2.4 GHz NanoStation M2
2 x 24V, 0.5A passive PoE Injector


Important Information: Please note the right of withdrawal that applies separately to this article. When the configuration service is selected, individual adjustments are made to the device. In the event of a revocation, the configuration service cannot be reimbursed.


Manufacturer information: Name: Ubiquiti Networks
Homepage: https://www.ui.com

Write the first review for this item and help others make a purchase decision!:

Loading ...