This powerful 4G directional panel antenna has a high gain of 17dBi, is specifically designed for the 1800MHz 4G frequency band and therefore compatible to 4G services of various 4G providers.
The 4G technology (also named LTE) provides enormously high speeds of wireless data transmission. However, as is so common in wireless networks, there are areas which are not very well covered with the 4G signal by the common providers which will cause a bad 4G connection and a poor datarate. Using this high gain 4G directional antenna can solve these kinds of problems.
With its high performance gain of 17dBi the 4G antenna can help you to get a stable 4G connection, even on extremely high distances. Due to the high signal amplification, the signal strength, signal stability and transfer rate improves very clearly.
The 4G antenna requires an external antenna connector on your 4G router. The common commercial 4G routers offer such a ,external antenna connection as SMA connector (standard).
Compatible 4G Routers with external SMA female antenna port:- Telekom Speedport LTE, Speedport LTE II
- Telekom Speedbox LTE, SpeedBox LTE II, SpeedBox LTE III
- Telekom Speedport Hybrid
- Vodafone Easybox 904 LTE
- Vodafone B1000, B2000, B3000, B4000
- Vodafone LTE-Modem
- Vodafone LTE-Turbobox LG FM300
- O2 LTE Router
- FritzBox LTE- Router (except FritzBox LTE 6842)
- D-Link DWR-921
- Huawei B390, B593, B890
- Huawei E5186
- Huawei B525
- Teltonika RUT950, RUT955, RUTX09, RUTX10, RUTX11
- many many more
Optional: Matching the above routers and the JARFT 4G antenna, we offer twin antenna cables with a length of 2.5m, 5m or 10m with N male to SMA male connector at a very good price (please select from the dropdown list above). The shorter the cable, the better!
The enclosure of the 4G antenna is manufactured from robust, weather-resistant and UV-resistant plastic / PVC. The reflector on the backside is made of stainless steel. The construction is very robust. This allows to use this 4G antenna for in- and outdoor appliances even under extreme weather conditions.
For optimal amplification of your 4G connection, it is recommended that the 4G antenna is installed outdoor with a free line of sight to the transmitter station of your 4G provider.
The antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included.
Technical Data:
| Manufacturer: | JARFT |
| Model: | J1800-17-DOMPA |
| Type of Antenna: | Directional Panel Antenna |
| Gain: | 17dBi (2x2 MIMO) |
| Impedance: | 50 Ohm |
| Frequency: | 1700 - 2100 MHz (4G 1800, 3G) |
| VSWR: | max. 1.5 |
| Ground: | DC-Ground |
| Polarisation: | Horizontal / Vertical (Linear) |
| Beam Width: | 35° Horizontal - 32° Vertical |
| Connector: | 2 x N female |
| Appliance: | In- and Outdoor |
| Max input power: | 50W |
| Max wind load: | 16,5 N |
| Operating Temperature: | -30° to 75° C |
| Dimensions: | 47cm x 25cm x 3cm |
| Weight: | 900g |
| Color: | White |
Technical Data Antennacable:
| Cable: | Twin / Dual |
| Length: | Optional |
| Impedance: | 50 Ohm |
| Loss: | 0,30db/m @ 800MHz 0,46db/m @ 1,8GHz 0,56db/m @ 2,6GHz |
| Capacity: | 80.3pf/m |
| Inner conductor: | 1.12mm Kupferdraht |
| Isolation: | 2.95mm PE |
| Jacket: | PVC |
| Outer diameter: | 4.95 mm |
| Color: | Black |
| Connector: | N male to SMA male |
Scope of delivery:
| 1 x JARFT J1800-17-DOMPA 17dBi 1800MHz 4G MIMO Panel Antenna |
| 1 x Mounting angle and a pipe clamp (30-50mm) |
| Optional: 1 x 2.5m / 5m / 10m TWIN Antenna cable N male to SMA male |
All reviews:
