Extend your Antenna cables – without Compromises
Are you facing the challenge of connecting two Antenna cables with N-Female connectors? This is where the JARFT N-13-09-TGN comes in. This N-Male to N-Male Adapter is designed to couple your cables into a longer line, with minimal losses. While every additional Cable naturally has its own attenuation, this high-quality adapter ensures that the connection point itself has virtually no negative impact on your signal. The insertion loss is extremely low, so you can utilize the full performance of your Antenna.
An RF Adapter for the Highest Demands up to 11 GHz
Whether you're optimizing your WiFi Network, installing a 5G Antennas / Outdoor Antennas or 4G / 4G Outdoor Antennas, or performing precise measurements in the lab – this adapter delivers the necessary performance. It is specified for a frequency range well over 11 GHz, guaranteeing excellent signal transmission without disruptive reflections. The secret lies in the high-quality materials: a PTFE dielectric and inner conductors made of silver-plated or gold-plated bronze ensure the best electrical properties and durability. Rely on a connection that is well-equipped for future technologies.
Weatherproof Antenna Cable Adapter with N-Male Connector
The N-standard was developed for professional use for good reason. The robust screw lock ensures an extremely stable connection that won't loosen even with vibrations on a mast or vehicle. When tightly screwed, the connection is weatherproof according to IP67 standard, making it dust and waterproof. For permanent outdoor use, we recommend additionally wrapping the connection point with self-vulcanizing sealing tape. This reliably and permanently protects the connection from any moisture and corrosion.
The Universal Problem Solver for Your 50-Ohm World
This 50 Ohm N-Type Coaxial Connector is a true multi-talent. It's the perfect problem solver whenever you need to 'transform' an N-Female into an N-Male or connect two cables. The only important thing is that you operate within the 50-Ohm world. Please note: This Coaxial Adapter is not compatible with 75-Ohm systems from older TV technology! An incorrect combination leads to massive signal problems and can damage components. For optimal RF performance, you should also tighten the connection with a suitable torque wrench to ensure perfect contact pressure.
Strengths & Notes at a Glance
- Pro: Extremely robust and vibration-proof connection due to N-screw lock.
- Pro: Suitable for high frequencies up to 11 GHz with very low signal losses.
- Pro: Universally compatible with all 50-Ohm cables and devices with N-Female connectors.
- Pro: High mechanical lifespan with at least 500 guaranteed mating cycles.
- Note: Exclusively for 50-Ohm systems. Not compatible with 75-Ohm components (e.g., SAT/TV).
- Note: For optimal RF performance, the connection should be tightened with a defined torque.
Specifications & Features
| Manufacturer: | JARFT |
| HAN/MPN: | N-13-09-TGN |
| EAN/GTIN: | 4251028601441 |
| Shop-SKU: | ART5456 |
| Product Category: | Coaxial RF Adapter (In-Series Adapter) |
| Connector A: | N-Male |
| Connector B: | N-Male |
| Characteristic Impedance: | 50 Ohm |
| Frequency Range: | DC to 11 GHz (typical) |
| Insertion Loss: | approx. 0.5 dB |
| Return Loss: | ≥ 25 dB @ 11 GHz (typical) |
| VSWR (Voltage Standing Wave Ratio): | ≤ 1.25 (typical) |
| Mating Cycles: | ≥ 500 |
| Coupling Mechanism: | Screw Lock (5/8-24 UNEF Thread) |
| Housing Material: | Brass, nickel-plated (typical) |
| Inner Conductor Material: | Bronze, silver-plated or gold-plated (typical) |
| Dielectric (Insulator): | PTFE (Polytetrafluoroethylene) |
| Operating Temperature Range: | -50 °C to +85 °C (estimated) |
| Protection Class (mated condition): | IP67 (typical) |
| Length (estimated): | approx. 35 - 38 mm |
| Maximum Diameter (estimated): | approx. 21 mm |
| Weight (estimated): | approx. 50 - 60 g |
Scope of Delivery
| 1 x JARFT N-13-09-TGN Coaxial Adapter N-Male to N-Male |
Frequently Asked Questions (FAQ)
Can I extend my WiFi Antenna Cables with this adapter?
Absolutely, that's exactly what it's for! If you have two Antenna Cables with N-female connectors, you can easily connect them with this adapter to create a longer line – and with minimal signal loss. This is perfect for your Network setup.
Is the adapter weatherproof so I can use it outdoors with my Antenna?
Yes, N-connectors are designed for outdoor use and are well-protected when securely screwed in (often rated IP67). However, for ultimate, long-lasting protection against moisture, we recommend additionally wrapping the connection with self-amalgamating sealing tape. This ensures your Antenna Mounting Accessories are secure.
What frequencies is your adapter suitable for without my signal suffering?
Don't worry, your signal is safe! You can easily use the adapter for all common applications like WiFi (2.4 GHz Antennas, 5 GHz Antennas, Dual-Band / WiFi 6E / WiFi 7 Antennas), 4G / LTE Outdoor Antennas, and 5G Antennas / Outdoor Antennas. It's designed for frequencies up to 11 GHz, so you're well-equipped for future technology.
Does this adapter also fit if my device has an SMA connector?
Unfortunately, no. This adapter is a pure N-to-N Coaxial Adapter. For your SMA connection, you'll need a special N-to-SMA adapter. It's best to check the designations carefully (plug/socket or male/female) to find the right one for you. We offer a range of Coaxial Adapters.
Does it matter which way I install the adapter?
My signal is weaker after the extension. Is your adapter to blame?
Very unlikely. The adapter itself has extremely low attenuation. A noticeable signal loss is almost always due to the additional Antenna Cables you are using. The longer the Cable, the weaker the signal will be. The adapter is only a tiny factor in this, ensuring your WiFi Antenna Cables perform optimally.
Homepage: https://www.jarft.eu/
