Skip to consent manager Skip to main content Skip to search Skip to category navigation Skip to footer
JARFT

2.5m 4G / 5G Twin Antenna Cable | N male to SMA male

End the cable clutter: This 2.5m long twin antenna cable bundles two lines in one string. Since modern LTE and 5G connections (MIMO) always require two cables anyway, this CLF-200 twin cable saves you the hassle of routing two separate wires. It comes pre-assembled with N-Male connectors (for the outdoor antenna) and SMA-Male connectors (for your router). This high-quality cable offers the perfect compromise between low signal loss and high flexibility during installation.


Highlights

  • 2-in-1 Design (Twin): Two cable strands firmly connected – perfect for 2x2 MIMO antennas.
  • Perfect Fit: N-Male to SMA-Male (The standard for 99% of all LTE/5G routers & antennas).
  • Ideal Length: 2.5m – perfect for short distances, e.g., from the router directly to the windowsill.
  • Good Compromise: CLF-200 cable has low attenuation but is still easy to bend with an individual diameter of approx. 5mm.
  • 4x4 MIMO Ready: If you have a 4x4 MIMO router (4 ports), simply order two of these twin cables.

Do you have questions about the 2.5m Twin Antenna Cable? Then just ask us!


Cable length
19,99 €
incl. 19% VAT , plus shipping costs
Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)
2.5m connection cable for LTE antenna - twin, N plug /...
2.5m 4G / 5G Twin Antenna Cable | N male to SMA male
19,99 € *

Why a Twin Cable for LTE & 5G?

Mobile networks (4G/LTE and 5G) operate almost exclusively using MIMO technology (Multiple Input Multiple Output). This means your router transmits and receives on two antennas simultaneously to double the speed and stabilize the connection. That's why most routers and outdoor antennas have two ports.
Instead of struggling to run two individual cables through the wall, you can use our CLF-200 Twin Cable. It can be routed like a single cable and splits cleanly at the ends.

The Right Connector for Your Router

The connector combination on this cable is the absolute standard for mobile broadband:

  • 2x N-Male: The large, robust connectors go outside to your LTE/5G outdoor antenna.
  • 2x SMA-Male: The small screw connectors (with the pin in the center) go to your router (e.g., Teltonika, FritzBox, Huawei, Netgear).

Not sure if your router has SMA? Just take a look at our product images. We've included a comparison picture of an SMA connection on a router. (Note: Do not confuse it with RP-SMA for standard Wi-Fi!).

Flexibility Meets Performance

The CLF-200 is an excellent cable for distances like 2.5m. It has significantly lower attenuation than very thin standard cables (like RG-58) but is still comfortable to route around corners and through cable ducts with its individual diameter of approx. 5mm.



Technical Data

Cable Type:CLF-200 TWIN (Dual Coaxial Cable)
Length:2.5m
Impedance:50 Ohm
Antenna Connector:2x N-Male
Router Connector:2x SMA-Male (with pin)
Inner Conductor:1.12 mm Copper Wire (per core)
Insulation:2.95 mm PE
Outer Jacket:PVC (Black)
Outer Diameter:approx. 4.95 mm (per core) / approx. 10 mm (total width)
Total Attenuation (at 2.5m): approx. 0.75 dB @ 800 MHz
approx. 1.15 dB @ 1800 MHz
approx. 1.40 dB @ 2600 MHz


Scope of Delivery

1x 2.5m LTE / 5G Twin Antenna Cable (CLF-200) with 2x N-Male to 2x SMA-Male

Manufacturer information: Name: JARFT
Homepage: https://www.jarft.eu/
Responsible person: Name: DAJB Hamburg GmbH
Street name: Von-Bargen-Straße 34
Postal code, City: 22041 , Hamburg
Country: Deutschland
E-Mail: hallo@dajb-hamburg.de

Write the first review for this item and help others make a purchase decision!:

Loading ...