Ubiquiti Networks launches the latest generation of airMAX CPE (Customer Premises Equipment), the LiteBeam 5AC LR (Long Range), with dedicated Wi-Fi management.
The LiteBeam 5AC LR directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC LR blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Integrated Design
Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the LiteBeam 5AC Long-Range is versatile and cost-effective to deploy.
Improved Mounting
The LiteBeam 5AC features a two-mount system that provides adjustment flexibility along both axes for versatile mounting options. The mounting system, coupled with the built-in bubble level, enables quick and easy alignment. Featuring enhanced protection against power surges, the LiteBeam 5AC LR offers a more robust mount with separate azimuth and elevation adjustments.
Integrated airMAX Technology
The next generation airMAX ac technology boosts the advantages of our proprietary TDMA protocol. Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
U Mobile App
The LiteBeam 5AC LR integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Accessing airOS via Wi-Fi The U Mobile App provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play (Android). U Mobile allows you to set up, configure, and manage the LiteBeam 5AC LR. It offers the following options once you're connected or logged in to the device:
Status: Check link status information or the basic configuration settings of the LiteBeam 5AC LR.
- Configuration: Change or update the existing configuration of the LiteBeam 5AC Long Range.
- Tools: Access tools for initial installation and configuration of the LiteBeam 5AC Long Range.
- Actions: Back up or update the configuration, upload new firmware, reboot the device, reset the device to factory defaults, access the airOS UI in the web browser, or disconnect from the LiteBeam 5AC Long Range.
The LiteBeam 5AC only works with other airMAX AC devices.
Technical Data:
Manufacturer / Product: |
Ubiquiti Networks / LiteBeam 5AC LR |
Processor Specs: |
Atheros MIPS 74Kc |
Memory Information: |
64MB SDRAM |
Operating System: |
AirOS |
Networking Interface: |
1 x 10/100/1000 BASE-TX (Cat. 5, RJ-45) |
Frequency Band: |
Worldwide: 2412 - 2462 MHz, 5170 - 5875 MHz USA: 5725 - 5850 MHz USA: U-NII-2A - 5250 - 5350 MHz USA: U-NII-2C - 5470 - 5725 MHz USA: U-NII-3 - 5725 - 5850 MHz |
Supported Standards: |
airMAX ac: 450MBit |
TX Power: |
max. 25dBm |
RX Sensitivity: |
min. -96dBm |
TCP/IP Throughput: |
450Mbps+ |
Antenna: |
26dBi Backfire Antenna |
max. Power Consumption: |
7 Watt |
Power Method: |
Passive Power over Ethernet 24V/0.3A Gigabit PoE Injector is included! |
Power Input: |
24V +- 10% |
ESD/EMP Protection: |
24KV radio frequency and ethernet electrostatic discharge (ESD) protection. |
Dimensions: |
51.25 x 38.57 x 25.83 cm |
Weight: |
1.735 kg |
Operating Temperature: |
-40°C to +70°C |
Operating Humidity: |
5 to 95% non-condensing |
ESD/EMP Protection: |
+- 24 kV |
Shock and Vibration:: |
ETSI300-019-1.4 |
Scope of delivery:
1 x Ubiquiti LiteBeam 5AC Long-Range |
1 x 24V/0.3A - Gigabit PoE Injector |
1 x Mounting Kit |