Tired of Cable Clutter?
In modern networks, powering numerous devices like IP cameras, Wi-Fi access points, and VoIP phones often creates a tangled mess of cables and a shortage of power outlets, making installations complex and inflexible.
Your Smart Solution: The Cudy C200P Gigabit PoE+ Switch!
The Cudy C200P is the ultimate solution to these challenges. This 8-Port Unmanaged PoE+ Switch eliminates the need for separate power cables for your PoE-enabled devices, efficiently delivering both data and power over a single Ethernet cable. Achieve a tidy setup and maximum flexibility for device placement.
Unrivaled Performance: Gigabit Speed and Robust PoE+ Power
Equipped with eight Gigabit ports, the Cudy C200P delivers lightning-fast data transfer rates for seamless network performance. Its generous 120 Watt PoE budget, compliant with the IEEE 802.3at/af standard, reliably powers even energy-intensive devices. Thanks to its unmanaged design, it's ready for immediate use – no complex configurations needed, just plug and play!
Efficiency and Reliability for Your Network
Invest in the Cudy C200P and benefit from a tidy, efficient, and future-proof network. Its robust construction and fanless design ensure quiet, reliable continuous operation, while its user-friendly nature saves you valuable time. Optimize your infrastructure and gain full control over your connected devices.
Technical Specifications
| Model: | Cudy C200P |
| Device Type: | Unmanaged Gigabit PoE+ Switch |
| Number of Ports: | 8 x 10/100/1000 Mbps RJ45 |
| PoE Ports: | 8 Ports, IEEE 802.3af/at compliant |
| PoE Standard: | IEEE 802.3af, IEEE 802.3at |
| Total PoE Budget: | 120 Watt |
| Switching Capacity: | 16 Gbps |
| Packet Forwarding Rate: | 11.9 Mpps |
| MAC Address Table: | 4K Entries |
| Jumbo Frame: | 9 KB |
| Standards: | IEEE 802.3, 802.3u, 802.3ab, 802.3x |
| Installation: | Desktop, Wall Mount |
| Housing Material: | Metal |
| Fan: | Fanless |
| LED Indicators: | Power, Link/Act, PoE |
| Power Supply: | External Power Adapter (53.5VDC/2.5A) |
| Max. Power Consumption: | 125 Watt (with PoE) |
| Dimensions (W x D x H): | 190 x 100 x 28 mm |
| Operating Temperature: | 0°C to 40°C |
| Operating Humidity: | 10% to 90% non-condensing |
Package Contents
| 1 x Cudy C200P Gigabit PoE+ Switch |
| 1 x Power Adapter |
| 1 x Quick Installation Guide |
Häufig gestellte Fragen (FAQ)
What is the Cudy C200P and what is it used for?
The Cudy C200P is an 8-Port Unmanaged Gigabit PoE+ Switch that allows you to power network devices such as IP cameras, Wi-Fi access points, or VoIP phones with both data and power over a single Ethernet cable. It simplifies installation and reduces cabling effort.
What kind of devices can I power with the PoE ports of the Cudy C200P?
You can connect all PoE-enabled devices that comply with IEEE 802.3af or 802.3at (PoE+) standards. These include, for example, IP surveillance cameras, Wi-Fi access points, VoIP phones, or thin clients.
Is the Cudy C200P switch easy to install and configure?
Yes, absolutely! The Cudy C200P is an 'unmanaged' switch, which means it requires no configuration. You simply connect it to your network and devices, and it's immediately ready for operation (plug-and-play).
What is the maximum PoE budget of the Cudy C200P and what does it mean?
The Cudy C200P has a total PoE budget of 120 watts. This means it can distribute a total of up to 120 watts of power to all connected PoE devices. This is sufficient for several power-intensive devices simultaneously.
Do I need special software or drivers to operate the Cudy C200P?
No, you do not need any special software, drivers, or a user interface to operate the Cudy C200P. It functions as a pure hardware switch and is ready for use immediately after connecting.
Homepage: https://www.cudy.com
