Stable WiFi Where You Need It: Performance Meets Design
The Cudy AP1300 is the answer to weak and overloaded WiFi. As a powerful dual-band Access Point, it delivers fast data rates with the AC1200 standard, up to 867 Mbit/s on the 5 GHz band and 300 Mbit/s on the 2.4 GHz band. The four internal, omnidirectional antennas are perfectly optimized for ceiling mounting and ensure wide and even signal distribution in offices, conference rooms, or large living areas. Thanks to advanced technologies like Beamforming, which precisely directs the WiFi signal to your end devices, and MU-MIMO for efficient communication with multiple devices simultaneously, you always enjoy a stable and fast connection.
Maximum Flexibility in Power Supply & Mounting
One of the biggest advantages of the AP1300 is its enormous flexibility in installation. You don't have to worry about a power outlet on the ceiling. The Access Point supports both the international standard 802.3at/af Power over Ethernet (PoE) and passive PoE (24-57V). This means you can power it with data and electricity via a single Ethernet cable coming from a PoE-enabled Ethernet Switch or separate PoE Injectors / Power Supplies. If you don't want to use PoE, a classic 12V DC connection is available as an alternative. The included mounting material makes installation on the wall or ceiling a breeze.
Business Features for an Intelligent Network
The Cudy AP1300 comes with features typically found only in expensive enterprise systems. The core for larger installations is the WiFi Access Point with Mesh Roaming. Based on 802.11k/v standards, Cudy Mesh enables seamless client handover between multiple Access Points. As you move through the building with your laptop or smartphone, your device automatically switches to the Access Point with the best signal without noticeable interruption. Additionally, Band Steering ensures that dual-band-capable devices are automatically moved to the faster and less congested 5 GHz band to optimize network performance for everyone.
Grows with Your Requirements: From Standalone to Controller
Whether you only need a single Access Point or want to illuminate an entire building – the Cudy AP1300 is scalable. For smaller setups, you can configure each AP individually via the intuitive web interface. As your network grows and you need to manage multiple WiFi Access Points, you can switch to a Cudy Access Point Controller (hardware or software). This enables central configuration, management, and monitoring of all devices in the network, saving you an enormous amount of time and effort. This way, your network remains clear and easy to manage even with growing demands.
Strengths & Notes at a Glance
- Pro: Flexible Power Supply through 802.3at/af PoE and passive PoE for easy installation.
- Pro: Cudy Mesh (802.11k/v) enables seamless roaming without connection drops.
- Pro: Business features like MU-MIMO, Beamforming, and Band Steering for optimal network performance.
- Pro: High client capacity for over 100 devices thanks to a powerful dual-core processor.
- Pro: Versatile operating modes (AP, Router, Repeater, WISP) for maximum adaptability.
- Pro: Unobtrusive design for ceiling or wall mounting.
- Note: Configuration of advanced functions such as Mesh or VLANs requires basic network knowledge.
- Note: For the easiest Mesh setup and central management, a Cudy Gateway or Controller is recommended.
Specifications & Features
| Manufacturer: | Cudy |
| Model: | AP1300 Indoor |
| EAN: | 6971690792022 |
| Processor: | 880 MHz Dual-Core CPU (MT7621DA) |
| RAM: | 128 MB (1 Gbit) DDR3 RAM |
| Flash Memory: | 16 MB (128 Mbit) NOR |
| WiFi Standard: | Wi-Fi 5 (IEEE 802.11ac/n/g/b/a) |
| Frequency Bands: | 2.4 GHz and 5 GHz (Dual-Band) |
| Maximum Data Rate (5 GHz): | 867 Mbit/s |
| Maximum Data Rate (2.4 GHz): | 300 Mbit/s |
| Antenna Type: | 4x Internal omnidirectional Antennas |
| Antenna Gain (5 GHz): | Up to 4.64 dBi |
| Antenna Gain (2.4 GHz): | Up to 5.31 dBi |
| WiFi Features: | MU-MIMO, Beamforming, Band Steering, Airtime Fairness, Cudy Mesh (802.11k/v) |
| Network Port: | 1x Gigabit Ethernet Port (RJ-45) |
| Power Supply (PoE): | 802.3at/af PoE, 24-57V Passive PoE |
| Power Supply (DC): | 12V / 1A (Power adapter not included) |
| Maximum Client Count: | Recommended for > 100 devices |
| Operating Modes: | Access Point (AP), Router, Repeater, WISP |
| Security: | WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise, WPA3, MAC Filtering |
| Management: | Web Interface, Cudy AP Controller, Cloud Management |
| Housing: | Plastic, for ceiling/wall mounting |
| Dimensions: | Ø 231.9 x 57.1 mm |
| Certifications: | CE, FCC, RoHS |
Scope of Delivery
| 1 x Cudy AP1300 Indoor Access Point |
| 1 x Mounting Kit for Ceiling/Wall |
| 1 x Ethernet Cable |
| 1 x Quick Start Guide |
Frequently Asked Questions (FAQ)
Can the Cudy AP1300 be used outdoors?
No, this specific model (EAN 6971690792022) is designed exclusively for indoor use. For outdoor use, there is a separate model "Cudy AP1300 Outdoor", which features a weather-resistant housing and external Antennas.
How is the Access Point powered?
The AP1300 can be flexibly powered via an Ethernet cable using Power over Ethernet (PoE standards 802.3at/af or passive 24-57V) from a compatible Ethernet Switch or PoE Injector. Alternatively, operation via a separate 12V DC power supply is also possible.
What does "Cudy Mesh" support mean?
The Mesh function (based on 802.11k/v standards) allows multiple Cudy WiFi Access Points to be connected to a single, large WiFi Network. End devices can move seamlessly between the individual Access Points without losing connection (roaming).
How many devices can connect to the AP1300 simultaneously?
The manufacturer states that the Access Point is designed for simultaneous connection of over 100 devices, making it suitable for use in offices, classrooms, or small to medium-sized event venues.
Is technical expertise required for setup?
Basic configuration as an Access Point is relatively simple via a web interface and a setup wizard. However, using advanced features such as VLANs or a Captive Portal requires basic Network understanding.
Can I mount the AP1300 on the ceiling?
Yes, the device is designed for direct mounting on ceilings or walls. The corresponding Mounting System is included in the scope of delivery. Its design resembles a smoke detector and blends inconspicuously into the environment.
Homepage: https://www.cudy.com
