Your Shield for Outdoor Electronics: The MaxLink ML-ALUBOX
Are you looking for a truly reliable solution to protect your valuable Network technology outdoors? The MaxLink ML-ALUBOX is made exactly for that! This high-quality Aluminum Enclosure offers your devices unparalleled protection against the harshest environmental influences. Whether it's pouring rain, icy snow, fine dust, or mechanical stress – thanks to the IP65 weatherproof construction, your electronics remain safe and dry. It is the ideal choice, for example, to set up a temporary outdoor WLAN infrastructure for events or campsites, where your WLAN Access Points require maximum protection.
Cleverly Designed: Passive Cooling and EMC Protection
Devices operated outdoors are often exposed to extreme temperatures. This is where the MaxLink ML-ALUBOX fully demonstrates its strengths: The solid aluminum material not only serves as an extremely Robust Electronics Enclosure but also as an efficient heatsink. This passive cooling reliably dissipates the heat from your internal components to the outside, preventing heat build-up that could drastically shorten the lifespan of your devices. At the same time, the metal enclosure offers excellent EMC protection by shielding electromagnetic interference. This is particularly important for sensitive applications such as 4G / 5G Routers or Helium Miner Enclosures used in industrial IoT sensor environments or on construction sites.
Easy Installation, Maximum Flexibility
Forget complicated drilling and elaborate adjustments! The MaxLink ML-ALUBOX comes to you perfectly prepared. On the underside, you will find four 16mm drillings, ideally dimensioned for standardized N-Type Pigtail drillings, to connect your external Antennas. An additional 20mm drilling is provided for easy insertion of your Network cables and allows for a clean cable gland. The included mounting set allows for flexible wall mounting or pole mounting, so you can place your Outdoor Enclosure exactly where it is needed – perfect for decentralized monitoring systems with mini-PCs or MikroTik Routerboard Enclosures.
Robustness that Convinces: Ready for Every Challenge
When it comes to protecting your critical electronics, you cannot compromise. The MaxLink ML-ALUBOX is synonymous with durability and reliability. The powder-coated aluminum alloy is not only impact-resistant but also extremely resistant to corrosion and other environmental influences. Rely on an enclosure that withstands even the most demanding environments and ensures the long-term performance of your devices. It is an investment in the future of your outdoor infrastructure.
Strengths & Notes at a Glance
- Pro: Extremely robust and weatherproof (IP65): Provides excellent protection against rain, snow, dust, and mechanical influences, significantly extending the lifespan of the installed electronics.
- Pro: Efficient passive cooling and EMC protection: The aluminum material serves as a heatsink and simultaneously shields electromagnetic interference, improving the operational safety and performance of the devices.
- Pro: Pre-configured for easy installation: With pre-drilled holes for Antennas and cable glands, as well as an included mounting set for wall and pole, installation is time-saving and straightforward.
- Note: No active cooling: In case of very high heat generation from internal components or extremely high ambient temperatures, passive cooling might reach its limits.
- Note: Fixed drilling sizes: The predetermined drilling sizes (4x 16mm, 1x 20mm) are practical but can limit flexibility if specific Antennas or cable glands with other diameters are to be used.
Specifications & Features
| Manufacturer: | MaxLink |
| Model / MPN: | ML-ALUBOX |
| Material: | Powder-coated aluminum (aluminum alloy) |
| Protection Class: | IP65 (Weatherproof, dustproof, jet-proof) |
| External Dimensions (L x W x H): | 28.1 x 22.5 x 9.5 cm |
| Internal Dimensions (L x W x H): | 240 x 190 x 90 mm |
| Usable Internal Dimensions (approx. L x W x H): | 25.6 x 20.0 x 8.6 cm |
| Pre-drilled holes (Antennas): | 4x 16mm diameter (for N-Type Pigtails) |
| Pre-drilled holes (Cables): | 1x 20mm diameter (for PG9/M20 cable gland) |
| EMC Protection: | Yes, shielding of interference signals by metal enclosure |
| Cooling: | Passive, by aluminum material as heatsink |
| Seal: | Circumferential seal |
| Surface: | Powder-coated (Matte) |
| Color: | Gray |
| Mounting Accessories: | Set for wall and pole mounting included |
| Suitable for pole diameter: | 28 to 58 mm |
| Closure: | 4x enclosure screws |
| Compatibility (Examples): | MikroTik Routerboards (RB411, RB433, RB711, RB911, RB912), various WLAN Access Points, 4G/5G Routers, Helium Miners |
| Features: | Robust, impact-resistant, durable |
Scope of Delivery
| 1 x MaxLink Aluminum Outdoor Enclosure |
| 1 x Mounting Set (Brackets/Clamps for Pole & Wall) |
| 1 x Screw Set |
Frequently Asked Questions (FAQ)
What is a MaxLink ML-ALUBOX enclosure mainly used for?
You primarily use it to protect your Network devices such as WiFi Access Points, LTE/5G routers, Helium Miners, or MikroTik Routerboards in outdoor areas.
Is the MaxLink aluminum enclosure really weatherproof?
Yes, it has an IP65 protection rating, which means it's dust-tight and protected against jet water from any angle, making it ideal for your outdoor use.
Which devices fit into the MaxLink ML-ALUBOX?
It is suitable for various MikroTik boards (e.g., RB411, RB433, RB711, RB911, RB912) and other WiFi Access Points or routers that fit within the internal dimensions of 240 x 190 x 90 mm, which you want to install.
How is the MaxLink enclosure mounted?
A set for wall and pole mounting is included in the scope of delivery, allowing you flexible installation.
Does the aluminum enclosure offer protection against electromagnetic interference?
Yes, the metal enclosure shields against interference signals and thus provides EMC protection for your installed electronics.
Do I have to drill holes for antennas myself in the enclosure?
No, you don't have to drill any holes. The enclosure already has 4x 16mm drillings, which are perfect for N-Type pigtails, and 1x 20mm drilling for a PG9/M20 cable gland.
Homepage: https://www.maxlink.eu/en/
