Your Network, finally flexible: No more compromises!
Do you remember the times when an SFP+ module could only do 10 Gigabit or 1 Gigabit? That was often an annoyance, especially if you wanted to connect more modern devices like current UniFi Access Points, fast NAS systems, or gaming mainboards with 2.5 GbE or 5 GbE connections. Often the connection would then fall back to a slow 1 Gigabit, and you couldn't use the full potential of your hardware. The Ubiquiti UACC-CM-RJ45-10MG puts an end to that! This innovative module masters all intermediate stages and ensures that your devices are always connected at the optimal speed – from 1 GbE via 2.5 GbE and 5 GbE up to full 10 GbE.
100 Meters High-Speed: Limitless Connectivity
A decisive advantage of the UACC-CM-RJ45-10MG over older '10G-only' modules is its impressive range. Thanks to more efficient chip technology, you can bridge up to 100 meters of cable distance with this module, even at full 10 Gigabit speed. The only prerequisite is a high-quality Cat6A Ethernet Cables. Where older models often reached their limits at 30 meters, this module now offers you the freedom to integrate even distant offices, warehouses, or outdoor UniFi Access Points into your Network at maximum speed, without having to resort to expensive fiber optic Cabling. This saves time and costs!
Intelligent Technology for your Network
The Ubiquiti UACC-CM-RJ45-10MG is not only fast but also intelligent. Thanks to its Auto-Negotiation function, it automatically adapts to the highest possible speed of the connected end device. For you, this means: Plug in and forget – the module does the rest. Like all powerful copper transceivers, this multi-gigabit module also gets warm during operation. This is physically conditioned and completely normal. Just make sure that your switch, in which you operate it, is sufficiently ventilated, especially if you use several of these modules next to each other. With a maximum power consumption of only 1.9 watts, it is also more efficient than many of its predecessors.
Ubiquiti Quality you can rely on
When it comes to reliable Network solutions, Ubiquiti is a brand you can trust. The UACC-CM-RJ45-10MG Transceiver is perfectly matched to the Ubiquiti UniFi product range but also works seamlessly with all other SFP+ devices that offer multi-rate support. You receive a robust and powerful product that has been specially developed to meet the requirements of modern and demanding Network environments. Invest in a solution that offers you maximum performance and flexibility not only today but also tomorrow.
Strengths & Notes at a Glance
- Pro: Supports flexible Multi-Gigabit speeds (1G/2.5G/5G/10G).
- Pro: Impressive range of up to 100 meters over copper cable.
- Pro: Automatic speed adaptation (Auto-Negotiation).
- Pro: Compatible with Ubiquiti UniFi and other SFP+ devices.
- Pro: Efficient power consumption of maximum 1.9 watts.
- Note: Can get warm during operation – ensure adequate switch ventilation.
Specifications & Features
| Manufacturer: | Ubiquiti |
| Model: | UACC-CM-RJ45-MG |
| Product Type: | SFP+ to RJ45 Transceiver |
| Compatibility: | Ubiquiti UniFi & all SFP+ devices with Multi-Rate Support |
| Supported Data Rates: | 100 Mbps / 1 Gbps / 2.5 Gbps / 5 Gbps / 10 Gbps |
| Auto-Negotiation: | Yes |
| Interface (Switch): | SFP+ (10 Gigabit Slot) |
| Connector (Cable): | RJ45 Socket (Copper) |
| Max. Range: | 100 meters (at all speeds incl. 10G) |
| Recommended Cable: | Cat 6a (for 10G/5G/2.5G) / Cat 5e (for 1G) |
| Power Consumption: | Max. 1.9 watts |
| Operating Temperature: | 0 to 70° C |
| EAN: | 0810084690154 |
Scope of Delivery
| 1 x Ubiquiti UACC-CM-RJ45-MG Module |
Frequently Asked Questions (FAQ)
What is the Ubiquiti UACC-CM-RJ45-10MG used for?
It is an SFP+ to RJ45 module designed to enable 10-Gigabit Ethernet connectivity over standard copper cables in SFP+ ports of network devices such as switches or routers.
What speeds does the Ubiquiti UACC-CM-RJ45-10MG support?
The module supports speeds of 2.5 GBit/s, 5 GBit/s, and 10 GBit/s, allowing flexible integration into various network environments.
Is the Ubiquiti UACC-CM-RJ45-10MG compatible with any SFP+ port?
It is primarily designed for Ubiquiti devices with SFP+ ports but can also work with other SFP+ compatible devices. It is recommended to check compatibility before purchase.
What are the advantages of using an SFP+ to RJ45 module?
The main advantages are the ability to utilize existing copper cable infrastructures for higher speeds, flexibility in choosing connection types, and cost-efficiency compared to re-Cabling with fiber optics.
Does the Ubiquiti UACC-CM-RJ45-10MG require special drivers?
Generally, no special drivers are required, as the module is recognized as a standard transceiver. Functionality depends on the host device's firmware.
Can I use the UACC-CM-RJ45-10MG with older Ethernet Cables?
For 10 GBit/s, at least Cat6a cable is recommended. For 2.5 GBit/s and 5 GBit/s, Cat5e or Cat6 cables may also work, but with potentially shorter ranges and lower reliability.
Street name: Third Avenue 685
Postal code, City: 10017 , New York
Country: Vereinigte Staaten
State: New York
Homepage: https://www.ui.com
