The Turbo for Your Fleet Rollout: Tracker Configuration in Bulk
Imagine if you could halve the preparation time for your vehicle fleet. With this OBD configuration cable, this wish becomes a reality. Instead of installing each GPS Tracker individually in the vehicle and then configuring it, you handle the entire preparation centrally in one place. This approach optimizes your workflow, drastically reduces logistical effort, and makes scaling your fleet easier than ever before. It is the ultimate GPS Tracker Fleet Preparation Tool for professionals.
Efficiency Redefined: Powering Teltonika FMB001 Externally
The Teltonika OBD Power Cable is more than just a piece of Cabling; it's a key to maximum efficiency. It allows you to test every Teltonika OBD tracker under real conditions, upload firmware updates, and make all settings before it even gets near a vehicle. Support teams can use it to simulate error patterns and make diagnoses without needing direct access to the vehicle. A small cable with a huge impact on your productivity and a must-have in the field of Teltonika Accessories.
Plug & Power: Preparing Your GPS Trackers Made Easy
Handling couldn't be simpler. You connect the two open cable ends to any DC power source between 10 and 30 volts – a standard lab Power Supply is sufficient. Then you plug your Teltonika GPS Tracker into the OBD-II socket of the cable. The device is immediately powered and ready for configuration via its Micro-USB cable or Bluetooth. No complicated setup, no tinkering – just pure efficiency.
The Indispensable Tool for Every Fleet Manager
This cable is not a luxury but a necessity for anyone managing more than a handful of vehicles. It ensures that your technicians can work quickly, safely, and standardized. Pre-configuration minimizes the error rate during installation and reduces vehicle downtime to an absolute minimum. Invest in a smooth process and equip your team with the right tool for professional fleet management.
Strengths & Notes at a Glance
- Pro: Enables simultaneous configuration of dozens of trackers in the office.
- Pro: Drastic reduction of logistical effort in fleet rollouts.
- Pro: Indispensable for efficient testing, troubleshooting, and support.
- Pro: Broad compatibility with a variety of Teltonika OBD trackers.
- Pro: Simple and safe handling without interfering with vehicle electronics.
- Note: An external 10-30V DC power source (e.g., lab Power Supply) is absolutely necessary and not included in the scope of delivery.
- Note: The cable transmits only power (Pin 16 VCC, Pin 4/5 GND), no OBD diagnostic data (CAN/K-Line). Configuration is done via USB/Bluetooth.
Specifications & Features
| Manufacturer: | Teltonika Telematics |
| Product Name: | OBD Power Cable / OBD Power Cable |
| Model Number / MPN: | PPWS0000110 |
| EAN / GTIN: | 0708747434859 |
| Product Type: | Accessories (Power Adapter Cable) |
| Primary Function: | External Power Supply for OBD trackers for desktop configuration |
| Connector Side A: | 1x OBD-II (SAE J1962) Female Connector |
| Connector Side B: | 2x stripped cable ends (open strands) |
| Input Voltage: | 10 - 30 V DC (Direct Current) |
| Total Cable Length: | 23.5 cm (± 0.5 cm tolerance) |
| Stripping Length: | 0.5 cm (± 0.1 cm tolerance) |
| Materials: | High-quality plastic, copper |
| Color: | Black |
| Weight (estimated): | approx. 50 g |
| Area of Use: | Indoor (Office, Workshop) |
| Primary Compatibility: | Teltonika FMB001, FMB010 |
| Extended Compatibility: | FMC001, FMM001, FM3001, FMB003, FMB020 and Others |
| Important Function Note: | Transmits only power (Pin 16 VCC, Pin 4/5 GND), no CAN/K-Line data |
Scope of Delivery
| 1 x Teltonika OBD Power Cable (PPWS0000110) |
Frequently Asked Questions (FAQ)
What exactly is this Teltonika OBD cable used for?
This cable is used to power Teltonika GPS Trackers, such as the FMB001, outside of a vehicle, for example, at a desk. This allows technicians to conveniently configure, test, and perform firmware updates on the devices before installation in a vehicle fleet.
Do I need additional Accessories to use the cable?
Yes, you need an external power source that can supply a DC voltage between 10 and 30 volts, such as a laboratory power supply. This power source is connected to the two stripped cable ends.
Can I read vehicle data (OBD-II) on my computer with this cable?
No, this cable is purely a power supply cable. It only connects the power pins of the OBD port. To configure the tracker, you must additionally connect the tracker to your computer via a Micro-USB cable or Bluetooth.
Which Teltonika GPS Trackers is this cable compatible with?
It is primarily designed for the FMB001 and FMB010 models, but also works with many other Teltonika OBD trackers such as FMC001, FMM001, FM3001, FMB003, and FMB020.
Why should I use this cable instead of configuring the tracker directly in the car?
When setting up a large vehicle fleet, this cable saves an enormous amount of time. Instead of having to go to the vehicle for each individual tracker, all devices can be prepared centrally in the office, which significantly speeds up the entire process.
How do I correctly connect the cable to a power source?
The cable has two open ends for the positive (+) and negative (-) terminals of your 10-30V DC power source. Pay attention to the correct polarity to avoid damaging the GPS tracker. The pinout of the OBD connector (Pin 16 is VCC/+) dictates the assignment.
Homepage: https://teltonika-iot-group.com/
