Built for Extremes: IP67 Protection for Uncompromising Reliability
When your radio connection is exposed to the elements, you need hardware that is more than just 'weatherproof'. The Ubiquiti Bullet AC is certified with the IP67 protection class. This means it is not only protected against splashes but completely against dust and even temporary immersion. Its robust aluminum housing efficiently dissipates heat and withstands the harshest conditions from -40 to +70 °C. Mount it directly to your Antenna and forget about it – it's built to simply work, no matter what comes.
Direct Connection: Maximum Performance Without Signal Loss
Every cable between a radio and an Antenna means a loss of performance. The Bullet AC radically eliminates this problem. With its integrated N-Type Connector, it screws directly onto the external Antenna. This design ensures maximum signal integrity and significantly simplified installation. You get full transmit and receive power exactly where it's needed: at the Antenna. This is key for stable and long-range radio bridges and optimal coverage as a base station.
airMAX ac: The Intelligent Technology for Stable Networks
Forget the problems of standard WiFi in outdoor areas. The Bullet AC uses Ubiquiti's proprietary airMAX ac protocol, based on TDMA (Time Division Multiple Access). Instead of all devices transmitting uncoordinated and causing collisions, airMAX assigns each client a fixed time slot for data transmission. The result is drastically reduced latency and consistently high data throughput, especially in Point-to-MultiPoint scenarios. This efficiency makes it the first choice for professional airMAX ac Components in WISP Networks.
Important Notes: Compatibility and Power Supply
It is crucial to understand that the Bullet AC is a specialist. It is exclusively compatible with other Ubiquiti airMAX devices and CANNOT be used as a conventional WiFi Access Point for smartphones, laptops, or other standard clients. For Power Supply, a 24V Passive PoE adapter is absolutely required, which is not included. Compatibility with standard 802.3af/at PoE Switches is not given, therefore dedicated PoE Injectors / Power Supplies are necessary.
Strengths & Notes at a Glance
- Pro: Extreme robustness (IP67) for use in the harshest environments.
- Pro: Direct Antenna integration eliminates performance losses from RF cables.
- Pro: High flexibility through free choice of the suitable external Antenna.
- Pro: Efficient airMAX ac (TDMA) protocol for high stability and throughput.
- Note: Incompatible with standard WiFi clients like laptops or smartphones.
- Note: Requires a separate 24V Passive PoE Injector (not included).
Specifications & Features
| Manufacturer: | Ubiquiti |
| Model: | Bullet AC IP67 (BulletAC-IP67) |
| EAN: | 0817882025683 |
| Device Class: | Access Point (Radio) for airMAX Networks |
| Frequency Bands: | Dual-Band: 2.4 GHz & 5 GHz |
| Frequency Range (Worldwide): | 2400 - 2483.5 MHz / 5150 - 5875 MHz |
| Frequency Range (USA/CA): | 2400 - 2483.5 MHz / 5150 - 5850 MHz (U-NII-1/2A/2C/3) |
| WiFi Standard: | Proprietary airMAX ac (TDMA Protocol) |
| Compatibility: | Exclusively with Ubiquiti airMAX Devices (CPEs) |
| Max. Transmit Power (TX Power): | 21 dBm |
| Antenna Connector: | 1x N-Type Connector (female) |
| Integrated Antenna: | No |
| Max. Data Throughput (2.4 GHz): | 160+ Mbps |
| Max. Data Throughput (5 GHz): | 300+ Mbps |
| Channel Widths (PtP): | 10/20/30/40/50/60/80 MHz |
| Channel Widths (PtMP): | 10/20/30/40 MHz |
| WiFi Encryption: | WPA2-AES |
| Processor: | MIPS 74Kc |
| RAM: | 64 MB DDR2 |
| Network Interface: | 1x 10/100/1000 Gigabit Ethernet Port |
| Operating System: | Ubiquiti airOS 8 |
| Management: | Web Interface (HTTPS), UISP App via temporary Wi-Fi |
| LED Indicators: | Power, Ethernet, (4) Signal Strength |
| Power Supply Method: | 24V Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| PoE Adapter: | Not included |
| Supported Voltage Range: | 20–27V DC |
| Max. Power Consumption: | 7W |
| Protection Class: | IP67 (Dustproof, Protection against temporary immersion) |
| ESD/EMP Protection: | ± 24kV Contact / Air |
| Housing Material: | Aluminum and Rubber |
| Dimensions: | 190 x 46 x 46 mm |
| Weight: | 213 g |
| Operating Temperature: | -40 to 70° C |
| Operating Humidity: | 5 to 95% non-condensing |
| Certifications: | CE, FCC, IC |
| Shock & Vibration: | ETSI300-019-1.4 |
Scope of Delivery
| 1 x Ubiquiti Bullet AC IP67 |
Frequently Asked Questions (FAQ)
Can I use the Ubiquiti Bullet AC as a WiFi Repeater for my home?
No, that is not possible. The Bullet AC uses the proprietary airMAX protocol and cannot connect to a standard WiFi Router or extend its signal for normal devices like smartphones or laptops. It is designed for connecting with other airMAX ac Components over long distances in a Network.
Which Antenna do I need for the Bullet AC IP67?
You need an external Antenna with an N-Type (male) Coaxial Connector. The choice of Antenna depends on your goal: For 360° coverage, an Omni-Directional Antenna; for sector coverage, a Sector Antenna; and for a point-to-point connection, a Directional Antenna. Consider Dual-Band Antennas for optimal performance.
Is the Bullet AC IP67 weatherproof?
Yes, absolutely. It has an IP67 protection rating, meaning it is completely dustproof and can even withstand temporary immersion in water. It is built for permanent outdoor use under harsh conditions, making it suitable for robust Enclosures and various Mounting Systems.
How is the Bullet AC powered?
Power is supplied via the Ethernet Cables using 24V Passive Power over Ethernet (PoE). You will need a separate 24V PoE Injector / Power Supply, as a standard PoE Ethernet Switch (802.3af/at) will not work for this Network device.
What is the difference between airMAX and normal WiFi?
Normal WiFi uses CSMA/CA, which can lead to collisions with many devices. airMAX uses TDMA technology, which assigns a fixed transmission slot to each client device. This is much more efficient for outdoor Network deployments and ensures higher stability and throughput, especially when using airMAX ac Components.
How do I configure the device?
Initial setup is done via a temporary WiFi connection that the Ubiquiti Networks device establishes after startup. You can then connect via the Ubiquiti UISP™ Mobile App or a web browser using the standard IP address to perform the configuration in the airOS operating system.
Street name: Third Avenue 685
Postal code, City: 10017 , New York
Country: Vereinigte Staaten
State: New York
Homepage: https://www.ui.com
