Allnet

The 868 MHz (EU868) LoRa antenna features a robust, durable housing and a gain of 3.5dBi. The omnidirectional antenna is specifically designed for the frequency range of 860 - 880 MHz, providing omnidirectional coverage. With a large vertical beamwidth of 65°, the antenna is particularly suitable for high-position installations, ensuring comprehensive area coverage. It is ideal for applications such as Helium mining and is compatible with all available miners as well as LoRa, LoRaWAN, Sigfox, XBee, RFID, and Z-WAVE.

The omnidirectional antenna is made from durable, weatherproof, and UV-resistant plastic, making it an excellent choice for outdoor use, capable of withstanding all weather conditions. It is designed for mounting on a mast or wall bracket; the necessary mounting accessories are included. Suitable antenna cables and wall brackets can be found under accessories.

The 868 MHz (EU868) LoRa antenna features a robust, durable housing and a gain of 6dBi. This omnidirectional antenna is specifically designed for the frequency range of 860 - 880 MHz, providing comprehensive coverage. With its relatively high gain of 6dBi, this LoRa antenna can illuminate very large areas. It is ideal for applications such as Helium mining and is compatible with all available miners, as well as LoRa, LoRaWAN, Sigfox, XBee, RFID, and Z-WAVE.

The omnidirectional antenna is made from durable, weatherproof, and UV-resistant plastic, making it an excellent choice for outdoor use, capable of withstanding all weather conditions. It is designed for mounting on a mast or wall bracket; the necessary mounting accessories are included. Suitable antenna cables and wall brackets can be found under accessories.

The 868 MHz (EU868) LoRa antenna features a robust, durable housing and a gain of 5dBi. The omnidirectional antenna is specifically designed for the frequency range of 860 - 880 MHz, providing omnidirectional coverage. With a vertical beamwidth of 32°, the antenna is particularly suitable for higher position installations, ensuring comprehensive area coverage. It is ideal for applications such as Helium mining and is compatible with all available miners as well as LoRa, LoRaWAN, Sigfox, XBee, RFID, and Z-WAVE.

The omnidirectional LoRa antenna is made from durable, weatherproof, and UV-resistant plastic, making it an excellent choice for outdoor use, capable of withstanding all weather conditions. It is designed for mounting on a mast or wall bracket; the necessary mounting accessories are included. Suitable antenna cables and wall brackets can be found under accessories.

The 868 MHz (EU868) LoRa antenna features a robust, durable housing and a gain of 7.3dBi. This omnidirectional antenna is specifically designed for the frequency range of 860 - 880 MHz, providing comprehensive coverage. With its very high gain of 7.3dBi, this LoRa antenna can illuminate extremely large areas. It is ideal for applications such as Helium mining and is compatible with all available miners, as well as LoRa, LoRaWAN, Sigfox, XBee, RFID, and Z-WAVE.

The omnidirectional antenna is made from durable, weatherproof, and UV-resistant plastic, making it an excellent choice for outdoor use, capable of withstanding all weather conditions. It is designed for mounting on a mast or wall bracket; the necessary mounting accessories are included. Suitable antenna cables and wall brackets can be found under accessories.

The ALLNET ALL1681205 adapter is the first ALLNET DLAN adapter with HomePlug AV2 standard, Smartlink 1200 Mbps and MIMO support. High data rates and Quality of Service (QoS) enable the use of HD multimedia applications to support high-speed, high-speed multimedia home networks throughout the home, including IPTV services, concurrent HD video and audio distribution, Voice Over IP calls, Online gaming, high speed internet, to realize.

The ALLNET ALL1681211 is another innovation for your home network that offers fast powerline performance of up to 1200Mbps and builds a fast 1200Mbps dual-band Wi-Fi connection. With SmartLink technology, reliable data transfers for Powerline users are possible with a significant speed update. For the first time, SmartLink now not only uses phase and neutral, but also the earth cable (ground) for data transmission and can therefore use the full potential of the power line.

This is a standard DC distribution cable with 2 x straight male plug to 1x female barrel jack ( 5.5 / 2.1mm).

The ALLNET PR2013O is a compact and powerful solution for extending Power-over-Ethernet (PoE) networks beyond typical limits. With the ability to extend the PoE signal by 100 meters per unit, this device enables a total range of up to 300 meters when an additional repeater is installed every 100 meters. This is especially useful in applications where network devices need to be powered over long distances.

Equipped with an input for IEEE802.3bt PoE+ (up to 90 watts) and two outputs for IEEE802.3af/at PoE+ (up to 30 watts each), the PR2013O provides flexible power delivery for a variety of end devices such as IP cameras, access points, or other PoE-enabled equipment. The Gigabit Ethernet ports (10/100/1000 Mbps) ensure fast and reliable data transmission.

The rugged IP67-certified housing protects the device from dust and water, making it ideal for use in demanding outdoor environments. Its extended operating temperature range of -20°C to +60°C ensures reliable performance even under extreme weather conditions.

Weighing just 230 grams and featuring a compact design, the PR2013O is easy to install and discreetly integrates into existing network infrastructures. The combination of high performance, durability, and user-friendliness makes this PoE repeater an excellent choice for professional outdoor networking projects.

The compact Super-Speed ALL-NC-2.5G-USBC/A adapter provides seamless conversion of the USB-C 3.1 Gen 1 port into a powerful Gigabit Ethernet 10/100/1000/2500 Mbps port.

In addition to an impressive 2.5 Gigabit bandwidth, this adapter offers a wide range of features. These include IPv4/IPv6 checksums that reduce CPU load, automatic crossover detection and correction, TCP Large Send Offload capability, various modes supporting Wake-on-LAN functions, integration with virtual LANs (VLANs), and advanced power management features.

The adapter enables effortless, automatic installation on modern operating systems from Windows 8.1 onwards, without the need for an active internet connection. This Gigabit adapter significantly enhances your computer’s network capabilities. It supplements missing RJ-45 network ports or other network cards and even replaces outdated or non-functioning network connections.

With USG Rackmount-Kit you can easily integrate a Ubiquiti USG into a standard rack. The kit takes up one height unit (1U) - up to two USG including the power supply can be used with the rack mounting kit. The USG is not included in the scope of delivery.

High-quality CAT.6A Ethernet modular coupling / connector with a metalized plastic housing and 1: 1 assignment. With this coupling (2 x RJ45) you can easily connect two Ethernet cables. The coupling thus serves as a connecting element for an Ethernet cable extension. The coupler can of course also be used for CAT.5 and CAT.6 cables.

High-quality CAT.6A Ethernet modular coupling / connector for outdoor use with an extremely robust IP68 nylon housing and 1: 1 assignment - With this coupler you can easily and safely connect two Ethernet cables with a diameter of 3-8mm outdoors. The coupling can of course also be used for CAT.5 and CAT.6 cables.

This weatherproof, shielded CAT.6A S/FTP network cable (LAN cable) is ideal for 10/100/1000 Mbps networks and is specifically designed for outdoor use. It features a durable PUR jacket, making it suitable for long-term use in outdoor and industrial environments. The cable is equipped with RJ-45 connectors with snagless boots on both ends, has an AWG26 gauge, and is halogen-free. The outdoor cable is available in lengths of 0.5 m, 1 m, 2 m, 5 m, 10 m, 20 m, 30 m, and 50 m. Naturally, this network cable is also PoE capable .

Use this CAT.7 connection module to repair damaged cable connections or to extend already installed cables without having to reinstall the entire section. Of course, the connection module is also compatible with CAT5 or CAT6 connections.